The template method for preparing nanostructures entails the synthesis of the desired material within the pores of a nanoporous membrane. In this work, TiO2 nanotubules of the anatase form have been synthesized by sol...The template method for preparing nanostructures entails the synthesis of the desired material within the pores of a nanoporous membrane. In this work, TiO2 nanotubules of the anatase form have been synthesized by sol-gel chemical method using porous anodic alumina as the template. Transmission electron microscopy（TEM）, scanning electron microscopy（SEM）, infrared spectroscopy（IR） and X-ray diffraction were used to investigate the structure and morphology of the TiO2 nanotubules. The results showed that the diameter and length of the obtained nanotubules were determined by the pore size and length of the PAA template. It was founded that through control of immersion time, both tubules and fibrils can be prepared; in addition, the wall thickness of the nanotubules can be varied at will. The result indicated that the sol particles absorbed preferably to the pore walls of the PAA membrane due to the fact that the pore walls were negatively charged and the TiO2 particles were positively charged.展开更多
Cubic phase spherical zirconia nano-powder was prepared by a direct template route in the lamellar liquid crystal formed by polyoxyethylene tert-octylphenyl ether(Triton X-100)/sodium dodecyl sulfate(SDS)/H_2O.The pre...Cubic phase spherical zirconia nano-powder was prepared by a direct template route in the lamellar liquid crystal formed by polyoxyethylene tert-octylphenyl ether(Triton X-100)/sodium dodecyl sulfate(SDS)/H_2O.The precursor powder and zirconia powder were characterized by XRD,FT-IR,TG/DSC,TEM,and SEM methods.Results show that the stability of the lamellar liquid crystal is controlled by NH_3·H_2O concentration.The size of nanoparticles is greatly affected by NH_3·H_2O and ZrOCl_2·8H_2O concentrations.The zirconia nanoparticles show narrow particle size distribution of 10-30 nm.展开更多
TheCo3O4 nanosheet-built hollow dodecahedrons(Co3 O4 NSHDs) were fabricated via a controllable twostep self-templated method. The ZIF-67 dodecahedrons were prepared as first self-template to synthesize the Co-LDH holl...TheCo3O4 nanosheet-built hollow dodecahedrons(Co3 O4 NSHDs) were fabricated via a controllable twostep self-templated method. The ZIF-67 dodecahedrons were prepared as first self-template to synthesize the Co-LDH hollow dodecahedrons, which were further used as self-template to fabricateCo3O4 NSHDs by a controlled calcination.The proposed two-step self-templated method not only brings hollow structures without auxiliary template, ultrathin nanosheet, ultrafine grains, and large surface areas, but also allows the easy and uniform surface modification, as demonstrated of PdO modification. TheCo3O4 NSHDs with above features could show multifunctional applications, such as sensing and catalysis. Experiments suggest that theCo3O4 NSHDs show good gas sensing performances to trimethylamine at a low operating temperature(100 oC). They can be further enhanced by PdO surface modification, which have a low detection limit(250 ppb) and a short response time(4.5 s).In addition, theCo3O4 NSHDs exhibited excellent oxygen evolution reaction performances with a low overpotential of359 mV, low Tafel slope of 80.7 mV dec-1 and low electrochemical impedance, which was superior to those for theCo3O4 NCs obtained by directly calcinating the ZIF-67 templates,Ni foam and most common metal oxides catalysts.展开更多
文摘The template method for preparing nanostructures entails the synthesis of the desired material within the pores of a nanoporous membrane. In this work, TiO2 nanotubules of the anatase form have been synthesized by sol-gel chemical method using porous anodic alumina as the template. Transmission electron microscopy（TEM）, scanning electron microscopy（SEM）, infrared spectroscopy（IR） and X-ray diffraction were used to investigate the structure and morphology of the TiO2 nanotubules. The results showed that the diameter and length of the obtained nanotubules were determined by the pore size and length of the PAA template. It was founded that through control of immersion time, both tubules and fibrils can be prepared; in addition, the wall thickness of the nanotubules can be varied at will. The result indicated that the sol particles absorbed preferably to the pore walls of the PAA membrane due to the fact that the pore walls were negatively charged and the TiO2 particles were positively charged.
文摘Cubic phase spherical zirconia nano-powder was prepared by a direct template route in the lamellar liquid crystal formed by polyoxyethylene tert-octylphenyl ether(Triton X-100)/sodium dodecyl sulfate(SDS)/H_2O.The precursor powder and zirconia powder were characterized by XRD,FT-IR,TG/DSC,TEM,and SEM methods.Results show that the stability of the lamellar liquid crystal is controlled by NH_3·H_2O concentration.The size of nanoparticles is greatly affected by NH_3·H_2O and ZrOCl_2·8H_2O concentrations.The zirconia nanoparticles show narrow particle size distribution of 10-30 nm.
基金financial support from the National Key R&D Program of China(2016YFC0201103)the Natural Science Foundation of China(51471161 and 11674320)Youth Innovation Promotion Association CAS and Key Research Projects of the Frontier Science CAS(QYZDB-SSW-JSC017)
文摘TheCo3O4 nanosheet-built hollow dodecahedrons(Co3 O4 NSHDs) were fabricated via a controllable twostep self-templated method. The ZIF-67 dodecahedrons were prepared as first self-template to synthesize the Co-LDH hollow dodecahedrons, which were further used as self-template to fabricateCo3O4 NSHDs by a controlled calcination.The proposed two-step self-templated method not only brings hollow structures without auxiliary template, ultrathin nanosheet, ultrafine grains, and large surface areas, but also allows the easy and uniform surface modification, as demonstrated of PdO modification. TheCo3O4 NSHDs with above features could show multifunctional applications, such as sensing and catalysis. Experiments suggest that theCo3O4 NSHDs show good gas sensing performances to trimethylamine at a low operating temperature(100 oC). They can be further enhanced by PdO surface modification, which have a low detection limit(250 ppb) and a short response time(4.5 s).In addition, theCo3O4 NSHDs exhibited excellent oxygen evolution reaction performances with a low overpotential of359 mV, low Tafel slope of 80.7 mV dec-1 and low electrochemical impedance, which was superior to those for theCo3O4 NCs obtained by directly calcinating the ZIF-67 templates,Ni foam and most common metal oxides catalysts.
