In order to improve the effectiveness of semantic web service discovery, the semantic bias between an interface parameter and an annotation is reduced by extracting semantic restrictions for the annotation from the de...In order to improve the effectiveness of semantic web service discovery, the semantic bias between an interface parameter and an annotation is reduced by extracting semantic restrictions for the annotation from the description context and generating refined semantic annotations, and then the semantics of the web service is refined. These restrictions are dynamically extracted from the parsing tree of the description text, with the guide of the restriction template extracted from the ontology definition. New semantic annotations are then generated by combining the original concept with the restrictions and represented via refined concept expressions. In addition, a novel semantic similarity measure for refined concept expressions is proposed for semantic web service discovery. Experimental results show that the matchmaker based on this method can improve the average precision of discovery and exhibit low computational complexity. Reducing the semantic bias by utilizing restriction information of annotations can refine the semantics of the web service and improve the discovery effectiveness.展开更多
In this paper the entanglement of pure 3-qubit states is discussed. The local unitary （LU） polynomial invariants that are closely related to the canonical forms are constructed and the relations of the coefficients ...In this paper the entanglement of pure 3-qubit states is discussed. The local unitary （LU） polynomial invariants that are closely related to the canonical forms are constructed and the relations of the coefficients of the canonical forms are given. Then the stochastic local operations and classlcal communication （SLOCC） classification of the states are discussed on the basis of the canonical forms, and the symmetric canonical form of the states without 3-tangle is discussed. Finally, we give the relation between the LU polynomial invariants and SLOCC classification.展开更多
Objective: To develop a new method for the detection of TPMT gene mutations and determine the frequencies of four TPMT alleles, TPMT *1, *3A , *3B and *3C in a healthy Chinese population. Methods: A TDI-FP assay syste...Objective: To develop a new method for the detection of TPMT gene mutations and determine the frequencies of four TPMT alleles, TPMT *1, *3A , *3B and *3C in a healthy Chinese population. Methods: A TDI-FP assay system was set up in out lab. To evaluate this system, 220 healthy individuals were analyzed for the polymorphic sites at positions 460(G→A)and 719(A→G)of the TPMP gene using our new TDI–FP method. Results: Three TPMP*3C(G 460→G 719) heterozygotes were identified, TPMP *3A and TPMP *3B were not found. All mutations were confirmed by conventional DNA sequencing analysis. Conclusion: TDI-FP method has proven to be very efficient as a rapid and accurate approach for TPMP genotyping. TPMP *3C was the only polymorphism identified in this clinical samples we have registered.展开更多
Deformation modulus is the important parameter in stability analysis of tunnels, dams and mining struc- tures. In this paper, two predictive models including Mamdani fuzzy system （MFS） and multivariable regression a...Deformation modulus is the important parameter in stability analysis of tunnels, dams and mining struc- tures. In this paper, two predictive models including Mamdani fuzzy system （MFS） and multivariable regression analysis （MVRA） were developed to predict deformation modulus based on data obtained from dilatometer tests carried out in Bakhtiary dam site and additional data collected from longwall coal mines. Models inputs were considered to be rock quality designation, overburden height, weathering, unconfined compressive strength, bedding inclination to core axis, joint roughness coefficient and fill thickness. To control the models performance, calculating indices such as root mean square error （RMSE）, variance account for （VAF） and determination coefficient （R^2） were used. The MFS results show the significant prediction accuracy along with high performance compared to MVRA results. Finally, the sensitivity analysis of MFS results shows that the most and the least effective parameters on deformation modulus are weatherin~ and overburden height, respectively.展开更多
A novel algorithm for a rotation invariant template matching is proposed when the fluctuating scope of the rotation angle is limited within the region of [-20°,20°]. The matching candidates are selected usin...A novel algorithm for a rotation invariant template matching is proposed when the fluctuating scope of the rotation angle is limited within the region of [-20°,20°]. The matching candidates are selected using a computationally low cost improved correlation algorithm. "AND" operation is adopted to reduce the computational cost. Therefore the algorithm improves the matching speed consumedly. The simulation results verify the efficiency of the proposed method. Moreover,when the size of reference image is fixed,the advantage of this time-saving algorithm is more obvious as the increase of the size of the real time image. The matching speed of the proposed method is over 20 times faster than the speed of the two-level pyramid decomposing accelerating method.展开更多
Deep drawing is one of the most important processes for forming sheet metal parts.It is widely used for mass production of cup shapes in automobile,aerospace and packaging industries.Cup drawing,besides its importance...Deep drawing is one of the most important processes for forming sheet metal parts.It is widely used for mass production of cup shapes in automobile,aerospace and packaging industries.Cup drawing,besides its importance as forming process,also serves as a basic test for the sheet metal formability.The effect of equipment and tooling parameters results in complex deformation mechanism.Existence of thickness variation in the formed part may cause stress concentration and may lead to acceleration of damage.Using TAGUCHI's signal-to-noise ratio,it is determined that the die shoulder radius has major influence followed by blank holder force and punch nose radius on the thickness distribution of the deep drawn cup of AA 6061 sheet.The optimum levels of the above three factors,for the most even wall thickness distribution,are found to be punch nose radius of 3 mm,die shoulder radius of 8 mm and blank holder force of 4 kN.展开更多
The mechanism of floor heave was analyzed by establishing mechanics models and solving differential equations. The amount of floor heave is proportional to the abutment pressure of surrounding rock, roadway width, and...The mechanism of floor heave was analyzed by establishing mechanics models and solving differential equations. The amount of floor heave is proportional to the abutment pressure of surrounding rock, roadway width, and the distance of support pressure peak to the roadway and is inversely proportional to the elastic modulus of floor rock. Using FLAC2D to simulate floor rock grouting in soft rock roadway verifies the active role of floor rock grouting in the floor controlling of soft rock roadway; floor rock grouting and grouting range directly impact on the stability scope of surrounding rock, namely, with the increase of grouting range, the subsidence of roof, the approach of both sides, and the amount of floor heave decreased gradually, the stability of surrounding rock is enhanced展开更多
Finite element models were established to analyze the influence of soft filler on stress concentration for a rectangular plate with an elliptic hole in the center. The influence was quantified by means of stress conce...Finite element models were established to analyze the influence of soft filler on stress concentration for a rectangular plate with an elliptic hole in the center. The influence was quantified by means of stress concentration factor (SCF). Seven shape factors of the elliptic hole and three levels of elasticity modulus of the soft filler were considered. The reduction coefficient and sensitivity index of SCF are the two indicators in evaluating the influence of soft filler. It was found that the reduction coefficient of SCF increases significantly as the shape factor and the elasticity modulus of the filler increase, indicating that soft filler can reduce the concentrated stress effectively, especially when the shape factor is great. Analysis for the sensitivity index of SCF indicates that SCF is more sensitive to materials with small elasticity modulus than to materials with large one.展开更多
基金The National Basic Research Program of China (973Program)(No.2005CB321802)Program for New Century Excellent Talents in University (No. NCET-06-0926)the National Natural Science Foundation of China (No.60403050,90612009)
文摘In order to improve the effectiveness of semantic web service discovery, the semantic bias between an interface parameter and an annotation is reduced by extracting semantic restrictions for the annotation from the description context and generating refined semantic annotations, and then the semantics of the web service is refined. These restrictions are dynamically extracted from the parsing tree of the description text, with the guide of the restriction template extracted from the ontology definition. New semantic annotations are then generated by combining the original concept with the restrictions and represented via refined concept expressions. In addition, a novel semantic similarity measure for refined concept expressions is proposed for semantic web service discovery. Experimental results show that the matchmaker based on this method can improve the average precision of discovery and exhibit low computational complexity. Reducing the semantic bias by utilizing restriction information of annotations can refine the semantics of the web service and improve the discovery effectiveness.
基金The project supported by National Natural Science Foundation of China under Grant No. 6J3433050 and the Natural Science Foundation of Xuzhou Normal University （Key Project） under Grant No. 03XLA04
文摘In this paper the entanglement of pure 3-qubit states is discussed. The local unitary （LU） polynomial invariants that are closely related to the canonical forms are constructed and the relations of the coefficients of the canonical forms are given. Then the stochastic local operations and classlcal communication （SLOCC） classification of the states are discussed on the basis of the canonical forms, and the symmetric canonical form of the states without 3-tangle is discussed. Finally, we give the relation between the LU polynomial invariants and SLOCC classification.
文摘Objective: To develop a new method for the detection of TPMT gene mutations and determine the frequencies of four TPMT alleles, TPMT *1, *3A , *3B and *3C in a healthy Chinese population. Methods: A TDI-FP assay system was set up in out lab. To evaluate this system, 220 healthy individuals were analyzed for the polymorphic sites at positions 460(G→A)and 719(A→G)of the TPMP gene using our new TDI–FP method. Results: Three TPMP*3C(G 460→G 719) heterozygotes were identified, TPMP *3A and TPMP *3B were not found. All mutations were confirmed by conventional DNA sequencing analysis. Conclusion: TDI-FP method has proven to be very efficient as a rapid and accurate approach for TPMP genotyping. TPMP *3C was the only polymorphism identified in this clinical samples we have registered.
文摘Deformation modulus is the important parameter in stability analysis of tunnels, dams and mining struc- tures. In this paper, two predictive models including Mamdani fuzzy system （MFS） and multivariable regression analysis （MVRA） were developed to predict deformation modulus based on data obtained from dilatometer tests carried out in Bakhtiary dam site and additional data collected from longwall coal mines. Models inputs were considered to be rock quality designation, overburden height, weathering, unconfined compressive strength, bedding inclination to core axis, joint roughness coefficient and fill thickness. To control the models performance, calculating indices such as root mean square error （RMSE）, variance account for （VAF） and determination coefficient （R^2） were used. The MFS results show the significant prediction accuracy along with high performance compared to MVRA results. Finally, the sensitivity analysis of MFS results shows that the most and the least effective parameters on deformation modulus are weatherin~ and overburden height, respectively.
基金the preparing Fund for defence equipment (No.6140517)
文摘A novel algorithm for a rotation invariant template matching is proposed when the fluctuating scope of the rotation angle is limited within the region of [-20°,20°]. The matching candidates are selected using a computationally low cost improved correlation algorithm. "AND" operation is adopted to reduce the computational cost. Therefore the algorithm improves the matching speed consumedly. The simulation results verify the efficiency of the proposed method. Moreover,when the size of reference image is fixed,the advantage of this time-saving algorithm is more obvious as the increase of the size of the real time image. The matching speed of the proposed method is over 20 times faster than the speed of the two-level pyramid decomposing accelerating method.
文摘Deep drawing is one of the most important processes for forming sheet metal parts.It is widely used for mass production of cup shapes in automobile,aerospace and packaging industries.Cup drawing,besides its importance as forming process,also serves as a basic test for the sheet metal formability.The effect of equipment and tooling parameters results in complex deformation mechanism.Existence of thickness variation in the formed part may cause stress concentration and may lead to acceleration of damage.Using TAGUCHI's signal-to-noise ratio,it is determined that the die shoulder radius has major influence followed by blank holder force and punch nose radius on the thickness distribution of the deep drawn cup of AA 6061 sheet.The optimum levels of the above three factors,for the most even wall thickness distribution,are found to be punch nose radius of 3 mm,die shoulder radius of 8 mm and blank holder force of 4 kN.
基金Supported by the National Natural Science Foundation of China （50874042） the National Natural Science Foundation of China （51174086）
文摘The mechanism of floor heave was analyzed by establishing mechanics models and solving differential equations. The amount of floor heave is proportional to the abutment pressure of surrounding rock, roadway width, and the distance of support pressure peak to the roadway and is inversely proportional to the elastic modulus of floor rock. Using FLAC2D to simulate floor rock grouting in soft rock roadway verifies the active role of floor rock grouting in the floor controlling of soft rock roadway; floor rock grouting and grouting range directly impact on the stability scope of surrounding rock, namely, with the increase of grouting range, the subsidence of roof, the approach of both sides, and the amount of floor heave decreased gradually, the stability of surrounding rock is enhanced
基金Supported by National Natural Science Foundation of China (No. 50878142)
文摘Finite element models were established to analyze the influence of soft filler on stress concentration for a rectangular plate with an elliptic hole in the center. The influence was quantified by means of stress concentration factor (SCF). Seven shape factors of the elliptic hole and three levels of elasticity modulus of the soft filler were considered. The reduction coefficient and sensitivity index of SCF are the two indicators in evaluating the influence of soft filler. It was found that the reduction coefficient of SCF increases significantly as the shape factor and the elasticity modulus of the filler increase, indicating that soft filler can reduce the concentrated stress effectively, especially when the shape factor is great. Analysis for the sensitivity index of SCF indicates that SCF is more sensitive to materials with small elasticity modulus than to materials with large one.
