求相量模的一种新的近似方法

提出了一种新的求相量模值的近似方法，与其它方法相比，该算法具有比较高的近似精度，四分区时，最大误差小于７．８７５×１０－３％，在微机保护和控制装置中具有较高的实用价值。

一种相量模的近似算法

一种相量模的近似算法喻伟军上海市俸贤县供电局（２０１４００）序言随着计算机在电力系统中的运用，算法研究越来越为人们所重视。然而，相量模的计算在其中扮演着一个比较重要的角色，下面介绍一种相量模的近似算法。１ 相量模的近似算法由于用微机进行开方的计算，其...

全桥LC-LC串并联谐振逆变器小信号建模及闭环设计

主要研究恒频移相控制全桥LC-LC串并联谐振逆变器的动态性能,采用相量建模法PDM(phasor-domain modeling)对其小信号模型进行分析,通过将时域量变换到相量域,可以得到谐振逆变器的相量域大信号模型,再加入小信号扰动后即可得到相量域的小信号模型。在此基础上,对采用相量建模法建立的大信号及小信号模型,进行了环路补偿设计。最后,搭建了一台输出功率为200 W的实验样机,实验结果验证了理论分析设计的正确性。

基于S变换的输电线路故障快速选相方法

传统选相方法无法满足超高速暂态量保护的要求,基于分析输电线路在不同故障类型下的模量特征以及两相接地故障下的三相电流波形特征,提出了一种新的输电线路故障快速选相方法。利用S变换提取各模分量在特定时间下的单一频率模相量,根据各模相量之间的关系确定故障类型;对于两相接地故障,则利用相电流积分区别故障相与非故障相。PSCAD仿真结果表明该方法能快速准确地选出故障相,不受故障位置、故障初始角和故障电阻等因素的影响。

Reducing semantic bias of annotations for semantic web service discovery

In order to improve the effectiveness of semantic web service discovery, the semantic bias between an interface parameter and an annotation is reduced by extracting semantic restrictions for the annotation from the description context and generating refined semantic annotations, and then the semantics of the web service is refined. These restrictions are dynamically extracted from the parsing tree of the description text, with the guide of the restriction template extracted from the ontology definition. New semantic annotations are then generated by combining the original concept with the restrictions and represented via refined concept expressions. In addition, a novel semantic similarity measure for refined concept expressions is proposed for semantic web service discovery. Experimental results show that the matchmaker based on this method can improve the average precision of discovery and exhibit low computational complexity. Reducing the semantic bias by utilizing restriction information of annotations can refine the semantics of the web service and improve the discovery effectiveness.

Use of the pilodyn for assessing wood properties in standing trees of Eucalyptus clones

The effectiveness of pilodyn was tested in evaluating wood basic density, outer wood density, heartwood density, and modulus of elasticity （MoE） at 22 four-year-old eucalyptus clones in Guangxi, China. Results indicated that the mean value ranged from 9.44 to 15.41 mm for Pilodyn penetration, 0.3514 to 0.4913 g.cm^-3 for wood basic density, and 3.94 to 7.53 Giga Pascal （GPa） for MoE, respectively. There were significant differences （1% level） in pilodyn penetration between different treatments, different directions and among the clones. Generally strongly negative correlations were found between pilodyn penetration and wood properties, and the coefficients ranged from -0,433 to -0,755. Our results, together with other studies, suggest that the use of pilodyn for assessing wood density and MoE was confirmed as a possibility.

AVO forwarding modeling in two-phase media: multiconstrained matrix mineral modulus inversion

AVO forward modeling is based on two-phase medium theory and is considered an effective method for describing reservoir rocks and fluids. However, the method depends on the input matrix mineral bulk modulus and the rationality of the two-phase medium model. We used the matrix mineral bulk modulus inversion method and multiple constraints to obtain a two-phase medium model with physical meaning. The proposed method guarantees the reliability of the obtained AVO characteristicsin two-phase media. By the comparative analysis of different lithology of the core sample, the advantages and accuracy of the inversion method can be illustrated. Also, the inversion method can be applied in LH area, and the AVO characteristics can be obtained when the porosity, fluid saturation, and other important lithology parameters are changed. In particular, the reflection coefficient amplitude difference between the fast P wave and S wave as a function of porosity at the same incidence angle, and the difference in the incidence angle threshold can be used to decipher porosity.

Characteristics of a Flow Transducer Based on Polarized Charge

In this paper we analyze the characteristics of a flow transducer based on polarized charge. The effects of the charged particles in pneumatic pipeline on the measurement pipe potential are discussed in detail and the equivalent circuits of the potential measurement are presented. On this bases, the relationships between mass flowrate and the electrical potential are obtained for different time constants of the measurement circuit. A satisfactory model is presented based on the characteristics of gas solid two phase flow. The linearity of the model is verified by the experiment results. The transducer, which is coaxially connected with the transport pipeline, does not disturb the flow state and has the features of ruggedness and durability, it is especially suitable for industry process control.

An Approach to Unsupervised Character Classification Based on Similarity Measure in Fuzzy Model

This paper presents a fuzzy logic approach to efficiently perform unsupervised character classification for improvement in robustness, correctness and speed of a character recognition system. The characters are first split into eight typographical categories. The classification scheme uses pattern matching to classify the characters in each category into a set of fuzzy prototypes based on a nonlinear weighted similarity function. The fuzzy unsupervised character classification, which is natural in the repre...

三相光伏并网系统的控制技术研究

通过对传统的三相光伏并网控制系统进行分析,要实现光伏并网逆变器交流侧电网的功率因数为1,就要使光伏并网q轴无功电流分量保持为0,基于这一理念对传统的控制方法进行了改进:去掉了外环电压控制环节,让d轴有功电流分量直接跟踪表示三相电流通用相量的模值。在Matlab/Simulink环境下建立仿真模型,对改进的控制策略进行仿真验证,仿真结果表明该方案在实现并网控制目标的同时,控制系统简单,控制代价小。

Investigation of Mode and Modulation Responses in Semiconductor PS-DFB Lasers:Use of a Vector-Newton Method

A numerical model for steady state analysis and analytical expressions for the AM and FM modulation responses of DFB lasers are presented.The small signal modulation responses of 3 phase shift(PS) DFB is investigated for the first time.A new method(Vector Newton method) to obtain multiple longitudinal mode of DFB lasers is used.It is demonstrated that this method is suitable for obtaining multiple solution of high nonlinear equations.Longitudinal photon density distribution and multiple longitudinal mode of 3PS DFB and simple DFB lasers are analyzed.The results show that modulation response characteristics of 3PS DFB laser is as good as that of DFB,and PS can weaken the longitudinal spatial hole burning (LHSB) effect and is in favor of single longitudinal mode operating of lasers.

Threat Assessment Method Based on Intuitionistic Fuzzy Similarity Measurement Reasoning with Orientation

The aim of this paper is to propose a threat assessment method based on intuitionistic fuzzy measurement reasoning with orientaion to deal with the shortcomings of the method proposed in [Ying-Jie Lei et al., Journal of Electronics and Information Technology 29(9)(2007)2077-2081] and [Dong-Feng Chen et al., Procedia Engineering 29(5)(2012)3302-3306] the ignorance of the influence of the intuitionistic index's orientation on the membership functions in the reasoning, which caused partial information loss in reasoning process. Therefore, we present a 3D expression of intuitionistic fuzzy similarity measurement, make an analysis of the constraints for intuitionistic fuzzy similarity measurement, and redefine the intuitionistic fuzzy similarity measurement. Moreover, in view of the threat assessment problem, we give the system variables of attribute function and assessment index, set up the reasoning system based on intuitionistic fuzzy similarity measurement with orientation, and design the reasoning rules, reasoning algorithms and fuzzy-resolving algorithms. Finally, through the threat assessment, some typical examples are cited to verify the validity and superiority of the method.

Similarity measure on intuitionistic fuzzy sets

Study of fuzzy entropy and similarity measure on intuitionistic fuzzy sets (IFSs) was proposed and analyzed. Unlike fuzzy set, IFSs contain uncertainty named hesitance, which is contained in fuzzy membership function itself. Hence, designing fuzzy entropy is not easy because of many entropy definitions. By considering different fuzzy entropy definitions, fuzzy entropy on IFSs is designed and discussed. Similarity measure was also presented and its usefulness was verified to evaluate degree of similarity.

Modeling and monitoring of nonlinear multi-mode processes based on similarity measure-KPCA

A new modeling and monitoring approach for multi-mode processes is proposed.The method of similarity measure(SM) and kernel principal component analysis(KPCA) are integrated to construct SM-KPCA monitoring scheme,where SM method serves as the separation of common subspace and specific subspace.Compared with the traditional methods,the main contributions of this work are:1) SM consisted of two measures of distance and angle to accommodate process characters.The different monitoring effect involves putting on the different weight,which would simplify the monitoring model structure and enhance its reliability and robustness.2) The proposed method can be used to find faults by the common space and judge which mode the fault belongs to by the specific subspace.Results of algorithm analysis and fault detection experiments indicate the validity and practicability of the presented method.

Study on Model of Correlation Between Chemical Ele－ment Contents in Tree Rings and Soils near Tree Roots

The chemical element contents in tree rings are correlated with those in the soils near the tree roots. Theresults in the present study showed that the correlation between them could be described using the followinglogarithmic linear correlation model:lgC'(Z) = α(Z) + b(Z)lgC(Z).Therefore, by determining the chrono-sequence C(Z, t), where Z is the atomic number and t the year ofelemental contents in the annual growth rings of trees, we could get the chrono-sequence C'(Z, t) of elementalcontents in the soil, thus inferring the dynamic variations of relevant elemental contents in the soil.

Solubility of red palm oil in supercritical carbon dioxide： Measurement and modelling

The solubility of red palm oil （RPO） in supercritical carbon dioxide （scCO2） was determined using a dynamic method at 8.5-25 MPa and, 313.15-333.15 K and at a fixed scCO2 flow rate of 2.9 g. mn -1 using a full factorial design. The solubility was determined under low pressures and temperatures as a preliminary study for RPO par- ticle formation using scCO2. The solubility of RPO was 0.5-11.3 mg. （g CO2） -1 and was significantly affected by the pressure and temperature. RPO solubility increased with pressure and decreased with temperature. The Adachi-Lu model showed the best-fit for RPO solubility data with an average relative deviation of 14% with a high coefficient of determination, R2 of 0.9667, whereas the Peng-Robinson equation of state thermodynamic model recorded deviations of 17%-30%.

Correlation of the quantifiable parameters of blood flow pattern derived with dynamic CT in solitary bronchogenic adenocarcinoma

Objective:To evaluate the correlation of the quantifiable parameters of blood flow pattern derived with dynamic CT in solitary bronchogenic adenocarcinoma(SBA).Methods:46 patients with solitary bronchogenic adenocarcinomas (SBA)(diameter≤4 cm)underwent multi-location dynamic contrast material-enhanced(nonionic contrast material was administrated via the antecubital vein at a rate of 4 mL/s by using an autoinjector 90 mL,4×5 mm or 4×2.5 mm scanning mode with stable table were performed)serial CT.Precontrast and postcontrast attenuation on every scan was recorded.Perfusion (PBA),peak height(PHBA),ratio of peak height of the SPN to that of the aorta(BA-to-A ratio)and mean transit time(MTT)were calculated.The correlation between peak height of the aorta(PHA)and parameters of the SBA(PHBA,BA-to-A ratio,PBA,and MTT)and those among parameters of the SBA were assessed by means of linear regression analysis.Regression equation among parameters of the SBA were obtain by means of stepwise regression.Results:The correlation between the SBA peak height(PHBA,36.78 HU±12.02)and the aortic peak height(PHA)was significant(r=0.506,P<0.0001).No significant cor- relation was found between the BA-to-Apeak height ratio(15.33%±4.55)and the aortic peak height(r=0.130,P=0.388> 0.05)as it was between the SBA perfusion(PBA,31.86 mL/min/100 g±9.74)and the aortic peak height(r=0.049,P=0.749 >0.05).The SBA perfusion correlated with the PHBA and the BA-to-A peak height ratio(r=0.394,P=0.007<0.05;r=0.407, P=0.005<0.05).The PHBA correlated positively with the BA-to-A peak height ratio(r=0.781,P<0.0001).Mean transit time was 14.84 s±5.52.PBA=18.500+0.872×BA-to-A ratio.BA-to-A ratio=4.467+0.295×PHBA.Conclusion:The linear correlation between the SBA perfusion and BA-to-Aratio and that between BA-to-Aratio and PHBA can be expressed by equation. It is possible to design a simpler scanning procedure of investigation of bronchogenic adenocarcinoma angiogenesis.

Effect of starch particles on foam stability and dilational viscoelasticity of aqueous-foam

Surface dilational rheological behavior and foam stability of starch/surfactant mixed solutions were studied at different starch concentrations and constant surfactant concentration. The results show that dilational viscoelasticity modulus, dilational elasticity modulus and dilational viscosity modulus increase with the concentration of starch particles. Foam stability increases with dilational viscoelasticity. Foam strength also increases with starch concentration. Starch particles play a positive effect on foam stability and dilational viscoelasticity and the effect becomes more significant as drainage proceeds. Film pictures indicate that the film with 20%(by mass) starch particles is thicker than that without starch. Starch particles gather in Plateau border and resist drainage, making the foam more stable.

DETERMINGING BPA UNDER UNCERTAINTY ENVIRONMENTS AND ITS APPLICATION IN DATA FUSION

Dempster-Shafer (DS) theory of evidence has been widely used in many data fusion ap- plication systems. However, how to determine basic probability assignment, which is the main and the first step in evidence theory, is still an open issue. In this paper, a new method to obtain Basic Probability Assignment (BPA) is proposed based on the similarity measure between generalized fuzzy numbers. In the proposed method, species model can be constructed by determination of the min, average and max value to construct a fuzzy number. Then, a new Radius Of Gravity (ROG) method to determine the similarity measure between generalized fuzzy numbers is used to calculate the BPA functions of each instance. Finally, the efficiency of the proposed method is illustrated by the classi- fication of Iris data.

Entanglement Entropy Signature of Quantum Phase Transitions in a Multiple Spin Interactions Model

Through the Jordan Wigner transformation, the entanglement entropy and ground state phase diagrams of exactly solvable spin model with alternating and multiple spin exchange interactions are investigated by means of Green＇s function theory. In the absence of four-spin interactions, the ground state presents plentiful quantum phases due to the multiple spin interactions and magnetic fields. It is shown that the two-site entanglement entropy is a good indicator of quantum phase transition （QPT）. In addition, the alternating interactions can destroy the magnetization plateau and wash out the spin-gap of low-lying excitations. However, in the presence of four-spin interactions, apart from the second order QPTs, the system manifests the first order OPT at the tricritical point and an additional new phase called ＂spin waves＂, which is due to the collapse of the continuous tower-like low-lying excitations modulated by the four-spin interactions for large three-spin couplings.