脱硝喷氨自动控制在大型火电厂中应用案例分析

本文叙述了华润首阳山发电厂2台630MW机组脱硝喷氨控制系统,该控制系统采用常规PID控制策略和模糊控制共同完成,能够准确的测量、控制相关设备,达到脱硝控制系统的安全、稳定、经济的运行.

ADAPTIVE GENETIC ALGORITHM BASED ON SIX FUZZY LOGIC CONTROLLERS

The performance of genetic algorithm(GA) is determined by the capability of search and optimization for satisfactory solutions. The new adaptive genetic algorithm(AGA) is built for inducing suitable search and optimization relationship. The use of six fuzzy logic controllers(6FLCs) is proposed for dynamic control genetic operating parameters of a symbolic-coded GA. This paper uses AGA based on 6FLCs to deal with the travelling salesman problem (TSP). Experimental results show that AGA based on 6FLCs is more efficient than a standard GA in solving combinatorial optimization problems similar to TSP.

FUZZY ADAPTIVE CONTROL OF FLEXIBLE-LINK ROBOT MANIPULATOR

A fuzzy adaptive control method is proposed for a flexible robot manipulator. Due to the structure characteristics of the flexible manipulator, the vibration modes must be controlled to realize the high-precision tip position. The Lagrangian principle is utilized to model the dynamic function of the single-degree flexible manipulator incorporating the assumed modes method. Simulation results of the fuzzy adaptive control method in the location control and the trajectory tracking with different tip disturbances are presented and compared with the results of the classic PD control. It shows that the controller can obtain the stable and robust performance.

Direct adaptive fuzzy control based on integral-type Lyapunov function

A new scheme of direct adaptive fuzzy controller for a class of nonlinear systems with unknown triangular control gain structure is proposed. The design is based on the principle of sliding mode control and the approximation capability of the first type fuzzy systems. By introducing integral-type Lyapunov function and adopting the adaptive compensation term of optimal approximation error, the closed-loop control system is proved to be globally stable, with tracking error converging to zero. Simulation results demonstrate the effectiveness of the approach.

EVOLUTIONARY FUZZY GUIDANCE LAW WITH SELF-ADAPTIVE REGION

Effective guidance is one of the most important tasks to the performance of air-to-air missile. The fuzzy logic controller is able to perform effectively even in situations where the information about the plant is inaccurate and the operating conditions are uncertain. Based on the proportional navigation, the fuzzy logic and the genetic algorithm are combined to develop an evolutionary fuzzy navigation law with self-adapt region for the air-to-air missile guidance. The line of sight (LOS) rate and the closing speed between the missile and the target are inputs of the fuzzy controller. The output of the fuzzy controller is the commanded acceleration. Then a nonlinear function based on the conventional fuzzy logic control is imported to change the region. This nonlinear function can be changed with the input variables. So the dynamic change of the fuzzy variable region is achieved. The guidance law is optimized by the genetic algorithm. Simulation results of air-to-air missile attack using MATLAB show that the method needs less acceleration and shorter flying time, and its realization is simple.[KH*3/4D]

ADAPTIVE FUZZY CONTROL FOR ROBOT ARM MANIPULATOR WITH 5-DOF

To control the robot and track the designed trajectory with uncertain disturbances in a specified precision range, an adaptive fuzzy control scheme for the robot arm manipulator is discussed. The controller output error method （COEM） is used to design the adaptive fuzzy controller. A few or all of the parameters of the controller are adjusted by using the gradient descent algorithm to minimize the output error. COEM is adopted in the adaptive control system for the robot arm manipulator with 5-DOF. Simulation results show the effectiveness of the method and the real time adjustment of the parameters.

Fuzzy control on automatic frequency tracking of ultrasonic vibration system with high power and high quality factor Q

In order to realize automatic tracking drift of resonance frequency of ultrasonic vibration system with high power and high quality factor Q, adaptive fuzzy control was studied with a self-fabricated ultrasonic plastic welding machine. At first, relations between amplitude of vibration and frequency as well as main loop current and amplitude of vibration were analyzed. From this analysis, we deduced that frequency tracking process of the vibration system can be concluded as an optimizing problem of one dimensional fluctuant extremum of main loop current in vibration system. Then a method of self-optimizing fuzzy control, used for the realization of automatic frequency tracking in vibration system, is presented on the basis of serf-optimizing adaptive control approach and fuzzy control approach. The result of experiments shows that the fuzzy self-optimizing method can solve the problem of tracking frequency drift very well. Response time of tracking in the system is less than 50 ms, which basically meets the requirements of frequency tracking in ultrasonic plastic welding machine.

Fuzzy adaptive genetic algorithm based on auto-regulating fuzzy rules

There are defects such as the low convergence rate and premature phenomenon on the performance of simple genetic algorithms （SGA） as the values of crossover probability （Pc） and mutation probability （Pro） are fixed. To solve the problems, the fuzzy control method and the genetic algorithms were systematically integrated to create a kind of improved fuzzy adaptive genetic algorithm （FAGA） based on the auto-regulating fuzzy rules （ARFR-FAGA）. By using the fuzzy control method, the values of Pc and Pm were adjusted according to the evolutional process, and the fuzzy rules were optimized by another genetic algorithm. Experimental results in solving the function optimization problems demonstrate that the convergence rate and solution quality of ARFR-FAGA exceed those of SGA, AGA and fuzzy adaptive genetic algorithm based on expertise （EFAGA） obviously in the global search.

Adaptive control using interval Type-2 fuzzy logic for uncertain nonlinear systems

A new adaptive Type-2 （T2） fuzzy controller was developed and its potential performance advantage over adaptive Type-1 （T1） fuzzy control was also quantified in computer simulation. Base on the Lyapunov method, the adaptive laws with guaranteed system stability and convergence were developed. The controller updates its parameters online using the laws to control a system and tracks its output command trajectory. The simulation study involving the popular inverted pendulum control problem shows theoretically predicted system stability and good tracking performance. And the comparison simulation experiments subjected to white noige or step disturbance indicate that the T2 controller is better than the T1 controller by 0--18%, depending on the experiment condition and performance measure.

Double Vagueness: Uncertainty in Multi-scale Fuzzy Assignment of Duneness

In the automation of identification of landscape features the vaguenessarises from the fact that the attributes and parameters that make up a landscape vary over space andscale. In most of existing studies, these two kinds of vagueness are studied separately. This paperinvestigates their combination in identification of coast landscape units. Fuzzy set theory is usedto describe the vagueness of geomorphic features due to the continuity in space. The vaguenessresulted from the scale of measurement is evaluated by statistic indicators. The differences offuzzy objects derived from data at differing resolutions (in size from 3 X 3 cells to 25 X 25 cells)are studied in order to examine these higher-order uncertainties.

A simplified adaptive interval Type-2 fuzzy control in practical industrial application

Adaptive Type-2 fuzzy control possesses control performance better than the traditional adaptive fuzzy control.However,heavy computation burden obviously blocks the utilization of adaptive Type-2 fuzzy control in industrial application.By adopting novel piecewise fuzzy sets and center-average type-reduction,a simplified adaptive interval Type-2 fuzzy controller involving less computation is developed for practical industrial application.In the proposed controller,the inputs are divided into several subintervals and then two piecewise fuzzy sets are used for each subinterval.With the manner of piecewise fuzzy sets and a novel fuzzy rules inference engine,only part of fuzzy rules are simultaneously activated in one control loop,which exponentially decreases the computation and makes the controller appropriate in industrial application.The simulation and experimental study,involving the popular magnetic levitation platform,shows the predicted system with theoretical stability and good tracking performance.The analysis indicates that there is far less computation of the proposed controller than the traditional adaptive interval Type-2 fuzzy controller,especially when the number of fuzzy rules and fuzzy sets is large,and the controller still maintains good control performance as the traditional one.

Guaranteed Cost Control for Uncertain Nonlinear Time-Delay Neutral Systems Based on T-S Fuzzy Model

The problem of guaranteed cost fuzzy controller is studied for a class of nonlinear time-delay neutral sys-tems with norm-bounded uncertainty based on T-S model. The sufficient conditions are first derived for the existenceof guaranteed cost fuzzy controllers. These sufficient conditions are equivalent to a kind of linear matrix inequalities.Furthermore, a convex optimization problem with LMI constraints is formulated to design the optimal guaranteedcost controller.

Acid-pickling plates and strips speed control system by microwave heating based on self-adaptive fuzzy PID algorithm

Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.

Fuzzy adaptive learning control network with sigmoid membership function

To get simpler operation in modified fuzzy adaptive learning control network （FALCON） in some engineering application, sigmoid nonlinear function is employed as a substitute of traditional Gaussian membership function. For making the modified FALCON learning more efficient and stable, a simulated annealing （SA） learning coefficient is introduced into learning algorithm. At first, the basic concepts and main advantages of FALCON were briefly reviewed. Subsequently, the topological structure and nodes operation were illustrated; the gradient-descent learning algorithm with SA learning coefficient was derived; and the distinctions between the archetype and the modification were analyzed. Eventually, the significance and worthiness of the modified FALCON were validated by its application to probability prediction of anode effect in aluminium electrolysis cells.

A new robust fuzzy method for unmanned flying vehicle control

A new general robust fuzzy approach was presented to control the position and the attitude of unmanned flying vehicles(UFVs). Control of these vehicles was challenging due to their nonlinear underactuated behaviors. The proposed control system combined great advantages of generalized indirect adaptive sliding mode control(IASMC) and fuzzy control for the UFVs. An on-line adaptive tuning algorithm based on Lyapunov function and Barbalat lemma was designed, thus the stability of the system can be guaranteed. The chattering phenomenon in the sliding mode control was reduced and the steady error was also alleviated. The numerical results, for an underactuated quadcopter and a high speed underwater vehicle as case studies, indicate that the presented adaptive design of fuzzy sliding mode controller performs robustly in the presence of sensor noise and external disturbances. In addition, online unknown parameter estimation of the UFVs, such as ground effect and planing force especially in the cases with the Gaussian sensor noise with zero mean and standard deviation of 0.5 m and 0.1 rad and external disturbances with amplitude of 0.1 m/s2 and frequency of 0.2 Hz, is one of the advantages of this method. These estimated parameters are then used in the controller to improve the trajectory tracking performance.

Traffic Signals Control with Adaptive Fuzzy Controller in Urban Road Network

An adaptive fuzzy logic controller (AFC) is presented for the signal control of the urban traffic network. The AFC is composed of the signal control system-oriented control level and the signal controller-oriented fuzzy rules regulation level. The control level decides the signal timings in an intersection with a fuzzy logic controller. The regulation level optimizes the fuzzy rules by the Adaptive Rule Module in AFC according to both the system performance index in current control period and the traffic flows in the last one. Consequently the system performances are improved. A weight coefficient controller (WCC) is also developed to describe the interactions of traffic flow among the adjacent intersections. So the AFC combined with the WCC can be applied in a road network for signal timings. Simulations of the AFC on a real traffic scenario have been conducted. Simulation results indicate that the adaptive controller for traffic control shows better performance than the actuated one.

Application of Improved Fuzzy Controller in Networked Control System

Aiming at the problem of network-induced delay and data dropout in networked control system, an improved fuzzy controller is proposed in this paper. Considering the great influence of a controller on the performance of control system, an improved controller with a second order fuzzy controller and network-induced delay compensator being added to the basic fuzzy controller is proposed to realize self-regulation on-line. For this type of controller, neither plant model nor measurement of network delay is required. So it is capable of automatically adjusting quantified factor, pro- portional factor, and integral factor according to the control system error and its derivative. The design makes full use of the advantages of quickness in operation and reduction of steady state error because of its integral function. The con- troller has a good control effect on time-delay and can keep a better performance by self-regulation on-line in the net- work with data dropout and interference. It is good in quickness, adaptability, and robustness, which is favorable for controlling the long time-delay system.

Self-adaptive fuzzy controller with formulary rule for servo control of discharge gap in Micro EDM

In micro electrical discharge machining （micro EDM）, it is difficult for servo controlling the narrow discharge gap with the characters of non-linear and quick change. In this paper, aiming at solving the problems above, a self-adaptive fuzzy controller with formulary rule （SAFCFR） is presented based on the dual feedbacks composed by gap electric signal and discharge-ratio statistics. To ensure the properties of self-optimizing and fast stabilization, the formulary rule was designed with a tuning factor. In addition, the fast-convergence algorithms were introduced to adjust control target center and output scale factor. In this way, the normal discharge ratio can tend to the highest value during micro-EDM process. Experimental results show that the proposed algorithms are effective in improving the servo-control performance. According to the drilling-micro-EDM experiments, the machining efficiency is improved by 20% through applying SAFCFR. Moreover, SAFCFR is a prompt way to optimize parameters of discharge-gap servo control.

Simulation and analysis of a Truck Model’s ride comfort based on fuzzy adaptive control theory

This paper tried to analyse and verify the fuzzy adaptive control strategy of electronic control air suspension system for heavy truck. Created the seven-freedoms vehicle suspension model, and the road input model; with Matlab/Simulink toolboxes and modules, built dynamical system simulation model for heavy truck with air suspension, fuzzy adaptive control model, height control model for air spring, and intelligent control and analyse on root mean square value of acceleration of gravity center of the vehicle under excitation of road. Results show that the fuzzy control had less help to the body vibration on the better pavement, but had the better benefit on the bad road, and the vehicle’s root mean square value of acceleration of gravity center is less than passive suspension’s obviously.

Effect of the computer fuzzy control on coal seam injection

To enhance the technology and efficiency of strata injection is a problem to be solved urgently. Because of effected by the rough and poor production conditions of mining and the changeable bearing condition of strata, the technological process of injection can not be controlled automatically.The fuzzy controlling technology of the coal strata injection is applied. This is the good way to ensure the effectiveness and efficiency of coal strata injection and to solve the current problems of production and safety in mining industry.