This paper describes the drift-diffusion theory of the bipolar field-effect transistor （BiFET） with two identical and connected metal-oxide-silicon-gates （MOS-gates） on a thin-pure-base. Analytical solution is obt...This paper describes the drift-diffusion theory of the bipolar field-effect transistor （BiFET） with two identical and connected metal-oxide-silicon-gates （MOS-gates） on a thin-pure-base. Analytical solution is obtained by partitioning the two-dimensional transistor into two one-dimensional problems coupled by the parametric sur- face-electric-potential. Total and component output and transfer currents and conductances versus D. C. voltages from the drift-diffusion theory, and their deviations from the electrochemical （quasi-Fermi） potential-gradient theory,are presented over practical ranges of thicknesses of the silicon base and gate oxide. A substantial contri- bution from the longitudinal gradient of the square of the transverse electric field is shown.展开更多
The rise of the far right in Europe has captured the attention of the international community in recent years. Its specific features are: an unprecedentedly strong influence, an obvious trend towards the moderate line...The rise of the far right in Europe has captured the attention of the international community in recent years. Its specific features are: an unprecedentedly strong influence, an obvious trend towards the moderate line, horizontal collaboration to expand its reach, and a very adept use of social media networks. The refugee crisis has given the far right an historical opportunity. The rise has also had a profound effect on European politics; it has deepened the political divide inside EU member states, and shaken up the traditional political values and the foundation of the union.The rise of the far right will likely not change Europe's political landscape, but problems of EU governance over its handling of the refugee crisis cannot be ignored.展开更多
A new modified formulation of the Additivity Rule (AR) was proposed to calculate the total electron scattering cross sections for CH4, CO2, NO2, and N2O, considering the overlapping between atoms in molecules and the ...A new modified formulation of the Additivity Rule (AR) was proposed to calculate the total electron scattering cross sections for CH4, CO2, NO2, and N2O, considering the overlapping between atoms in molecules and the not fully transparency of the molecules. The present calculation covers the range of impact energy from 10 to 3000 eV. The results are compared with experimental data and other theories where available. The atoms are presented by spherical complex optical potential, which is composed of static, exchange, polarization, and absorption terms.展开更多
High speed and large capacity belt conveyor is the main development trend. In the design, calculated and used of belt conveyor must be considered the high speed, large capacity, dynamic load. This paper starts from th...High speed and large capacity belt conveyor is the main development trend. In the design, calculated and used of belt conveyor must be considered the high speed, large capacity, dynamic load. This paper starts from the analysis of conveyor belt transverse vibration. Through calculate transverse vibration natural frequency of conveyor belt, and analyze the lateral stability of belt conveyor.展开更多
In this paper, a simplified model of the bistable piezoelectric cantilever beam with magnets is established, and the potential energy of the bistable system is analyzed. We have proposed the bistable L-shaped beam str...In this paper, a simplified model of the bistable piezoelectric cantilever beam with magnets is established, and the potential energy of the bistable system is analyzed. We have proposed the bistable L-shaped beam structure, which has the same geometry dimensions of the bistable straight beam in the first time. The comparative study on power generations and dynamic responses of the bistable straight beam and the bistable L-shaped beam plays an important role in exploring excellent piezoelectric generator.The experiment structure includes the base layer and the piezoelectric layer. The harmonic excitation is given to the system.Theoretical analysis results show that the potential energy function of the system has two obvious steady potential wells. In addition, the depth of the upper potential well is different from that of the lower potential well when the gravity potential energy is considered. Experimental results demonstrate that the power generation for the straight beam is better than that of the horizontally placed L-shaped beam when the excitation amplitude is 450 m V. There is the existence that the energy harvesting capacity of the bistable L-shaped beam is better than that of the bistable straight beam when the excitation amplitude is 400 m V.Furthermore, the power generation of the bistable L-shaped beam with the upper potential well is obviously better than that of the bistable L-shaped beam with the lower potential well. In addition, comparing with the straight beam, the dynamic response of the bistable L-shaped beam is more complex when the external excitation frequency is changed. It is also observed that the distance between the magnets has the obvious influence on the dynamic response of the bistable system. It is very effective to select the appropriate distance between the magnets to improve the power generation of the bistable energy harvester under the fixed excitation conditions.展开更多
Pile-anchor retaining structure is widely used in foundation pit engineering and side slope engineering in many countries. In contrast to strut, pile-anchor retaining structure has its typical features and advantages....Pile-anchor retaining structure is widely used in foundation pit engineering and side slope engineering in many countries. In contrast to strut, pile-anchor retaining structure has its typical features and advantages. It does not occupy the internal space of the foundation pit, and the project cost is much lower. Accurate prediction of the lateral displacement of the retaining structure is very important in the design stage. A simplified analysis method and several calculation assumptions of the lateral deformation of pile-anchor retaining structures are set up according to the engineering features. The expression function of lateral displacement versus depth is solved by means of a fitted function and the quasi-elastic summation method. The parameters are obtained through the stiffness equation of the anchors and the principle of minimum potential energy. The analytical evaluation of the lateral deformation curve is then completed, whose applicability is proved through practical engineering.展开更多
文摘This paper describes the drift-diffusion theory of the bipolar field-effect transistor （BiFET） with two identical and connected metal-oxide-silicon-gates （MOS-gates） on a thin-pure-base. Analytical solution is obtained by partitioning the two-dimensional transistor into two one-dimensional problems coupled by the parametric sur- face-electric-potential. Total and component output and transfer currents and conductances versus D. C. voltages from the drift-diffusion theory, and their deviations from the electrochemical （quasi-Fermi） potential-gradient theory,are presented over practical ranges of thicknesses of the silicon base and gate oxide. A substantial contri- bution from the longitudinal gradient of the square of the transverse electric field is shown.
文摘The rise of the far right in Europe has captured the attention of the international community in recent years. Its specific features are: an unprecedentedly strong influence, an obvious trend towards the moderate line, horizontal collaboration to expand its reach, and a very adept use of social media networks. The refugee crisis has given the far right an historical opportunity. The rise has also had a profound effect on European politics; it has deepened the political divide inside EU member states, and shaken up the traditional political values and the foundation of the union.The rise of the far right will likely not change Europe's political landscape, but problems of EU governance over its handling of the refugee crisis cannot be ignored.
文摘A new modified formulation of the Additivity Rule (AR) was proposed to calculate the total electron scattering cross sections for CH4, CO2, NO2, and N2O, considering the overlapping between atoms in molecules and the not fully transparency of the molecules. The present calculation covers the range of impact energy from 10 to 3000 eV. The results are compared with experimental data and other theories where available. The atoms are presented by spherical complex optical potential, which is composed of static, exchange, polarization, and absorption terms.
文摘High speed and large capacity belt conveyor is the main development trend. In the design, calculated and used of belt conveyor must be considered the high speed, large capacity, dynamic load. This paper starts from the analysis of conveyor belt transverse vibration. Through calculate transverse vibration natural frequency of conveyor belt, and analyze the lateral stability of belt conveyor.
基金supported by the National Natural Science Foundation of China(Grant Nos.11772008,11172009,11372015,11232009,10872010,11290152&10732020)
文摘In this paper, a simplified model of the bistable piezoelectric cantilever beam with magnets is established, and the potential energy of the bistable system is analyzed. We have proposed the bistable L-shaped beam structure, which has the same geometry dimensions of the bistable straight beam in the first time. The comparative study on power generations and dynamic responses of the bistable straight beam and the bistable L-shaped beam plays an important role in exploring excellent piezoelectric generator.The experiment structure includes the base layer and the piezoelectric layer. The harmonic excitation is given to the system.Theoretical analysis results show that the potential energy function of the system has two obvious steady potential wells. In addition, the depth of the upper potential well is different from that of the lower potential well when the gravity potential energy is considered. Experimental results demonstrate that the power generation for the straight beam is better than that of the horizontally placed L-shaped beam when the excitation amplitude is 450 m V. There is the existence that the energy harvesting capacity of the bistable L-shaped beam is better than that of the bistable straight beam when the excitation amplitude is 400 m V.Furthermore, the power generation of the bistable L-shaped beam with the upper potential well is obviously better than that of the bistable L-shaped beam with the lower potential well. In addition, comparing with the straight beam, the dynamic response of the bistable L-shaped beam is more complex when the external excitation frequency is changed. It is also observed that the distance between the magnets has the obvious influence on the dynamic response of the bistable system. It is very effective to select the appropriate distance between the magnets to improve the power generation of the bistable energy harvester under the fixed excitation conditions.
基金the National Natural Science Foundation of China (No. 51178267)the Science and Technology Committee of Shanghai (No. 10231200600)
文摘Pile-anchor retaining structure is widely used in foundation pit engineering and side slope engineering in many countries. In contrast to strut, pile-anchor retaining structure has its typical features and advantages. It does not occupy the internal space of the foundation pit, and the project cost is much lower. Accurate prediction of the lateral displacement of the retaining structure is very important in the design stage. A simplified analysis method and several calculation assumptions of the lateral deformation of pile-anchor retaining structures are set up according to the engineering features. The expression function of lateral displacement versus depth is solved by means of a fitted function and the quasi-elastic summation method. The parameters are obtained through the stiffness equation of the anchors and the principle of minimum potential energy. The analytical evaluation of the lateral deformation curve is then completed, whose applicability is proved through practical engineering.
