火力发电厂循环冷却水杀菌处理方式探讨

文章对火力发电厂循环水的杀菌处理方式做了简要论述 。

Electro-oxidation process for molybdenum concentrates

Sodium hypochlorite was used to treat the standard molybdenum concentrates; the oxidization conditions for sodium hypochlorite were investigated, and the electro-oxidation process was performed. The results indicate that in the suitable conditions, such as temperature around 25℃, NaCl concentration 4.0mol/L, mass ratio of ore slurry liquid to solid （mL/mS） 20, electric charge per gram Mo 0.522C, pH value of original slurry 8, anodic current density 700A·m-2 （cell potential 2.72.9V）, the Mo leaching rate and the current efficiency reach 98% and 36%, respectively. In order to overcome some shortages of the electro-oxidation process, such as low current efficiency, low Mo concentration in the leaching solution, ultrasonic was adopted to intensify the leaching process. The results show that the Mo leaching rate exceeds 98%, current efficiency increases from 36% to 50% and the Mo concentration in the leaching solution reaches about 60g/L at low mL/mS of 8 and low electric charge of 0.373C.

Molybdenum removal from copper ore concentrate by sodium hypochlorite leaching

The removal of molybdenum from a copper ore concentrate by sodium hypochlorite leaching was investigated. The results show that leaching time,liquid to solid ratio,leaching temperature,agitation speed,and sodium hypochlorite and sodium hydroxide concentrations all have a significant effect on the removal of molybdenum.The optimum process operating parameters were found to be：time,4 h;sodium hydroxide concentration,10%;sodium hypochlorite concentration,8%;liquid to solid ratio,10：1;temperature,50℃;and, agitation speed,500 r/min.Under these conditions the extraction of molybdenum is greater than 99,9%and the extraction of copper is less than 0.01%.A shrinking particle model could be used to describe the leaching process.The apparent activation energy of the dissolution reaction was found to be approximately 8.8 kJ/mol.

New insights into enhancement of sodium hypochlorite on formation and properties of anodic films on Ti6Al4V alloy

Anodic films were successfully fabricated on Ti6A14V alloy by anodic oxidation method in an environmental friendly electrolyte with and without sodium hypochlorite. The anodic films were characterized by means of the scanning electron microscope （SEM） and energy dispersive spectrometer （EDS）. Results revealed that the addition of sodium hypochlorite leads to the ultrafast growth of oxide films, and results in the significant changes of morphology and thickness. The influence of sodium hypochlorite on formation and crystallization of oxide films as a function of anodizing time was discussed. Meanwhile, potentiodynamic electrochemical tests and dry sliding wear tests were performed to evaluate the corrosion resistance and tribological properties of oxide films. It was found that the oxide film fabricated with the existence of sodium hypochlorite had improved corrosion resistance and tribological properties than the one formed without sodium hypochlorite. Moreover, the effect mechanism of sodium hypochlorite on the growth rate and surface morphologies of oxide films during the anodizing process was discussed. It was found that hypochlorite ions participated in the reaction on anode which causes the rapid growth of oxide films and then affect the whole anodizing process.

Study on the Effect of the Fe^2＋/NaClO Oxidation of CN

The effects of various parameters on the removal rate of CN were discussed in the paper. The results showed that under the conditions of 30℃ pH = 3.0, Fe2＋ dosage was 80 mg/L, the NaCIO concentration of 0.10 mol/L, reaction time in 60 min, Fe2＋ has a satisfactory catalytic activation, and the removal rate of CN was about 37.89%.

Oxidation of Lingwu Coal Extraction Residue in Aqueous Sodium Hypochlorite under Mild Conditions

To investigate the structural features and provide an alternative method for high value-added utilization of coal, Lingwu coal was first extracted with organic solvent at room temperature. Then its extraction residue was oxidized in aqueous sodium hypochlorite(ASHC) under mild conditions. The effects of oxidation conditions, such as temperature, reaction time, the ratio of Lingwu coal extraction residue(LCER, g) to ASHC(m L) and p H value, on the product distributions and compositions were investigated. The results of gas chromatography/mass spectrometry(GC/MS) suggested that 53 kinds of methyl esterified products were detected in total, and benzene carboxylic acids were the main oxidation products, while chloro-substituted benzene carboxylic acids were the main by-products. Higher yield and fewer kinds of organic acids could be obtained at lower p H value, especially for the main objective product, benzene carboxylic acids.

Wool Surface Modification and Its Adhesion with Nano Finishing Agent

The launderability of wool fabrics treated by nano finoshing agent influences directly the functional endurance of he treated wool fabric. In order to investigate the effect of wool fibers surface modification on the functional erdurance of nano finishinp wool fibers, in this paper, for the first time wool fibers were chemically modified by using NaClO aqueous and KMnO4 aqueous, and then chemically modified wool fibers and native wool fibers were treated using nano ZnO finishing agent, respectively. The launderability of wool fibers treated by nano finishing agent was investigated. The experimental results show that the chemically modified wool fibers have a good launderaility after being treated by nano ZnO finishing agent treating. The surface morphologies of wool fibers were observed by using SEM. It is got that there is a strong adbesion between nano ZnO and wool surface through XPS analysis.