A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used ...A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used to improve the linearity of the quadrature modulator;An LC resonant tank is used as the load of the upconversion mixer to improve its gain and increase the voltage swing. The measurement results show that the input P1dB achieves -3.6dBm, the transducer power gain of the circuit is -3.6dB,and the current consumes about 45.8mA with a 1.8V power supply.展开更多
This paper presents an up-conversion mixer for 2.4GHz wireless sensor networks in 0. 181xm RF complementary metal-oxide semiconductor （CMOS） technology. It is based on a double-balanced Gilbert cell type. With two G...This paper presents an up-conversion mixer for 2.4GHz wireless sensor networks in 0. 181xm RF complementary metal-oxide semiconductor （CMOS） technology. It is based on a double-balanced Gilbert cell type. With two Gilbert cells it was applied quadrature modulation. Operational ampli- tiers are used in this design to improve the conversion gain under low power consumption. The mixer design is based on 0.18txm RF CMOS process. And the mixer test results indicate that under 1.8V power supply, with input frequency 2.4 - 2.4835GHz, the conversion voltage gain is 1.2 - 2dB. When the output frequency is 2.4GHz, its power gain is -4.46dB, and its input referred 1 dB com- pression point is -11.5dBm and it consumes 1.77mA current.展开更多
文摘A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used to improve the linearity of the quadrature modulator;An LC resonant tank is used as the load of the upconversion mixer to improve its gain and increase the voltage swing. The measurement results show that the input P1dB achieves -3.6dBm, the transducer power gain of the circuit is -3.6dB,and the current consumes about 45.8mA with a 1.8V power supply.
基金Supported by the National High Technology Research and Development Program(No.2007AA01Z2A7)the Special Fund of Jiangsu Province for the Transformation of Scientific and Technological Achievements(No.BA2010073)
文摘This paper presents an up-conversion mixer for 2.4GHz wireless sensor networks in 0. 181xm RF complementary metal-oxide semiconductor （CMOS） technology. It is based on a double-balanced Gilbert cell type. With two Gilbert cells it was applied quadrature modulation. Operational ampli- tiers are used in this design to improve the conversion gain under low power consumption. The mixer design is based on 0.18txm RF CMOS process. And the mixer test results indicate that under 1.8V power supply, with input frequency 2.4 - 2.4835GHz, the conversion voltage gain is 1.2 - 2dB. When the output frequency is 2.4GHz, its power gain is -4.46dB, and its input referred 1 dB com- pression point is -11.5dBm and it consumes 1.77mA current.
