正交化设计对大子午扩张涡轮紧凑过渡段的流动性能影响

为了降低大子午扩张涡轮端区二次流损失和流动损失,同时降低过渡段缩短对涡轮性能的影响,对具有大子午扩张低压涡轮过渡段的紧凑过渡段设计进行气动分析,设计的紧凑型过渡段径向长度减小了30%,分析涡轮带原始过渡段和缩短后的紧凑型过渡段的气动性能和流场状态。并对涡轮静叶采用正交化设计,初步探索正交化设计对大子午扩张涡轮紧凑过渡段的流动性能的影响。研究发现,紧凑型的过渡段增加了气动损失,但涡轮静叶采用正交化设计后,整体效率提高了1.32%;正交化设计也能够改善叶片表面的压力分布,吸力面低压核心区从两个减少到一个;流道出口损失降低,涡轮整体气动性能提高。

在504胶、水晶胶表面化学镀铂的工艺研究

本文研究了504胶、水晶胶等廉价高分子表面上化学镀铂的工艺,获得了最佳配比。由于这些材料可以方便的与聚二甲基硅氧烷(PDMS)、面粉等相互拷贝表面形貌,因此该方法可以用于制备微流控芯片中的集成电极,燃料电池电极、热电极及光谱电化学池电极等。该方法无须专用设备,所用材料价格低廉,所用配方不含有毒成分,因此具有价格低廉、节能环保、适用于普通实验室、工厂生产等特点有良好的发展前景。

Optimization and Testing for PCR System of Rice by Orthogonal Design

[Objective] This study was to screen the economic or stable PCR system of rice and detect the generality of the selected system in different molecular markers based on PCR.[Method] With DNA extracted from rice leaves by CTAB method as the template,PCR system was optimized by L16(45)orthogonal design.[Result] Clear bands were amplified from 16 different combinations,but the amplification effects and yields had difference.The most economic and applicable system was as follows:20 ng DNA template,150 μmol/L dNT...

Optimization of SRAP-PCR System of Triticum aestivum——Based on Orthogonal Design

[Objective] The aim was to optimize the technical procedure of SRAP-PCR in Triticum aestivum L. [Method] The orthogonal design L16（45） was used to optimize SRAP-PCR amplification system of wheat Fengyou 68 on five factors （Taq polymerase,Mg2＋,DNA template,dNTPs and primer） at four levels. [Result] Effects of the five factors on SRAP-PCR reaction system were Mg2＋Taq polymerasedNTPsDNA templateprimer. Finally,an optimal SRAP-PCR system was established,that was the total 20 μl reaction system containing 2.0 μl 10×PCR Buffer,2.0 U Taq polymerase,2.0 mmol/L Mg2＋,0.2 mmol/L dNTPs,40 ng DNA template and 0.6 μmol/L primer. [Conclusion] The optimum SRAP-PCR system had provided some technical foundations to conduct SRAP genetic analysis for wheat varieties.

Optimization of PCR Reaction System for Random Single-strand DNA Pool in SELEX Technology

[Objective] This study aimed to optimize the PCR amplification conditions for random ssDNA pool in SELEX technology. [Method] L16（45） orthogonal experimental design was adopted for optimization of five important factors affecting PCR reaction system for random single-stranded DNA pool including Mg2＋ concentration, dNTP concentration, amount of Taq DNA polymerase, primer concentration and amount of random single-stranded DNA pool at four levels. Meanwhile, the annealing temperature and number of PCR reaction cycles were optimized to establish the optimal reaction system and PCR procedure. [Result] The optimal combination of PCR reaction system for random ssDNA pool was obtained, with a total system volume of 20 μl containing 2.0 μl of 10 × Buffer, 0.5 ng of random ssDNA pool, 2.5 mmol/L Mg2＋, 0.25 mmol/L dNTP Mixture, 0.6 μmol/L upstream and downstream primers and 1.5 U of Taq DNA polymerase; the optimal annealing temperature was 68 ℃ and the optimal number of cycles was 12. Under the above conditions, clear and stable bands with high specificity for random ssDNA pool were amplified. [Conclusion] This study laid the foundation for selection of parameters with higher specificity in SELEX technology.

Storage stability of SBS modified bitumen based on mixed-level orthogonal array design

The styrene-butadiene-styrene（SBS） modified bitumens with different contents of SBS modifiers are stored in different conditions to study the storage stability of SBS modified bitumen.Mixed-level orthogonal array design（OAD） is used and factors such as SBS modifier content,storage time,storage temperature and container size are chosen in a mixed-level OAD with an OA16（31×44） matrix.Parameters like the separation softening point difference（the separation difference of the ring and ball softening point of the top and bottom samples） and the average softening point（the arithmetic mean of the softening points of the top and bottom samples） are proposed to evaluate the separation and the ageing of modified bitumen during storage in this experiment,respectively.The results reveal that the separation and the ageing during storage exhibit a complicated variation for storage temperature and time.The separation softening point difference decreases with the storage temperature rising from 20 to 120 ℃ and increases with the temperature exceeding 120 ℃,and the average softening point drops with the storage time being prolonged.Different storage conditions have various effects on the storage stability of SBS modified bitumen.

Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidification process

The inverse heat conduction method is one of methods to identify the casting simulation parameters. A new inverse method was presented according to the Tikhonov regularization theory. One appropriate regularized functional was established, and the functional was solved by the sensitivity coefficient and Newtonaphson iteration method. Moreover, the orthogonal experimental design was used to estimate the appropriate initial value and variation domain of each variable to decrease the number of iteration and improve the identification accuracy and efficiency. It illustrated a detailed case of AlSiTMg sand mold casting and the temperature measurement experiment was done. The physical properties of sand mold and the interracial heat transfer coefficient were identified at the meantime. The results indicated that the new regularization method was efficient in overcoming the ill-posedness of the inverse heat conduction problem and improving the stability and accuracy of the solutions.

Preparation and microstructure characterization of poly-sialate-disiloxo type of geopolymeric cement

In order to investigate the influence of three key molar ratios （n（SiO2）/n（Al2O3）, n（K2O）/n（Al2O3） and n（H2O）/n（K2O））, a total of nine potassium poly-sialate-disiloxo （K-PSDS） geopolymeric cement matrices were designed according to orthogonal design principle. Subsequently, XRD, ESEM-EDXA and MAS-NMR techniques were employed to further characterize the microstructure of the most fully reacted geopolymeric cement matrix. The experimental results show that n（K2O）/n（Al2O3） has the most significant effect on compressive strength amongst the three ratios. The highest compressive strength （20.1 MPa） can be achieved when n（SiO2）/n（Al2O3）=6.5, n（K2O）/n（Al2O3）=0.8 and n（HEO）/n（K2O）=10.0. The FTIR spectra of nine PSDS geopolymeric cement matrices also indicate that geopolymeric cement matrix with the highest strength is the most fully reacted one and possesses the largest amount of geopolymeric cement products. The microscopic analysis reveals that PSDS geopolymeric cement matrix possesses structural characteristics similar to gel substances in having a wide range of Si endowments, but predominantly the framework molecular chains of Si partially replaced by 4-coordinated Al tetrahedral.

Process Optimization of Ultrasonic Extraction of Puerarin Based on Support Vector Machine

In ultrasonic extraction technology, optimization of technical parameters often considers extraction medium only, without including ultrasonic parameters. This paper focuses on controlling the ultrasonic extraction process of puerarin, investigating the influence of ultrasonic parameters on extraction rate, and empirically analyzing the main components of Pueraria, i.e., isoflavone compounds. A method is presented combining orthogonal experi- mental design with a support vector machine and a predictive model is established for optimization of technical parameters. From the analysis with the predictive model, appropriate process parameters are achieved for higher extraction rate. With these parameters in the ultrasonic extraction of puerarin, the experimental result is satisfactory. This method is of significance to the study of extracfing root-stock plant medicines.

Synthesis of ethoxycarbonyl isothiocyanate by orthogonal design

Using Schiff base as a phase transfer catalyst, ethoxycarbonyl isothiocyanate was synthesized by reacting ethyl chloroformate with sodium thiocyanate. In order to get the best synthetic technology, an orthogonal test （L9（34）） was applied. The results show that reaction temperature, reaction time, content of catalyst and molar ratio of sodium thiocyanate to ethyl chloroformate are the main factors influencing the yield. The four factors chosen for the present investigation are based on the results of a single-factor test. The optimum synthetic technology is determined as follows： reaction temperature 35 ℃, reaction time 3 h, the content of catalyst （molar fraction based on ethyl chloroformate） 1.5% and molar ratio of sodium thiocyanate to ethyl chloroformate 1.1. Under the optimized synthetic technology, the experimental yield reaches 96.8%.

Orthogonal array design for the optimization of stripping Sr(Ⅱ) from ionic liquids using supercritical CO2

The strontium ions extracted from the aqueous phase into 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide(C_2mimNTf2) with dicyclohexyl-18-crown-6(DCH18C6) was stripped effectively by supercritical CO_2(sc-CO_2).Hexafluoroacetylacetone(HFAA)-acetonitrile was found to be an excellent modifier of sc-CO_2 to enhance the stripping efficiency.In the orthogonal array design(OAD),OA_(25)(5~5)matrix was employed to optimize the stripping of Sr(Ⅱ) from the DCH 18C6-C_2mimNTf_2 system.Effects of five experimental factors:temperature,pressure,concentration of HFAA,static and dynamic extraction times as well as each factor at five-levels on the stripping of Sr(Ⅱ) were optimized.The effects of these parameters were treated by the analysis of variance(ANOVA).The results showed that Sr(II) could be nearly 100%extracted from the IL phase at 308 K,30 MPa,40 min of dynamic extraction and 60 mmol·L^(-1) HFAA in acetonitrile,respectively.Finally,the stripping mechanism was studied by ESI-MS.

Multi-species particle swarms optimization based on orthogonal learning and its application for optimal design of a butterfly-shaped patch antenna

A new multi-species particle swarm optimization with a two-level hierarchical topology and the orthogonal learning strategy(OMSPSO) is proposed, which enhances the global search ability of particles and increases their convergence rates. The numerical results on 10 benchmark functions demonstrated the effectiveness of our proposed algorithm. Then, the proposed algorithm is presented to design a butterfly-shaped microstrip patch antenna. Combined with the HFSS solver, a butterfly-shaped patch antenna with a bandwidth of about 40.1% is designed by using the proposed OMSPSO. The return loss of the butterfly-shaped antenna is greater than 10 d B between 4.15 and 6.36 GHz. The antenna can serve simultaneously for the high-speed wireless computer networks(5.15–5.35 GHz) and the RFID systems(5.8 GHz).

Study on the Determination of Trace Ni(II) by the Catalytic Kinetic Spectrophotometric Method

A new kinetic spectrophotometric method has been developed for the determination of trace Ni （Ⅱ in natural water. The method is based on the catalytic effect of Ni （Ⅱ） on the oxidation of weak acid brilliant blue dye （RAWL） by KIO4 in acid medium. The concentration of nickel （Ⅱ） can be determined spectrophotometrically by measuring the decrease of absorbance of RAWL at λ = 626 nm using the fix-time method. The influencing factors are investigated by the orthogonal experimental design. The obtained optimum analytical conditions are： pH = 2.00, CRAWL = 5.00×10^-5 mol·L^-1, c KlO4 = 2.00× 10^-5 mol·L^-1, the reaction time t= 10min and the temperature T = 25 ℃. Under the optimum conditions, the developed method allows the measurement of Ni （Ⅱ） in a range of 0 - 40.0ngmL1. The standard deviation of eleven independent measurements of blank reaction is S = 3.08× 10^-3 and the limit of detection is 2.20ng·mL^-1. The relative standard deviations （RSDs） in six replicate determinations of 5 ngmL-1 and 8 ngmL1 Ni （Ⅱ） are 2.87% and 1.11%, respectively. Moreover, the experiments show few cations and anions can interfere with the measurement of Ni （Ⅱ）. The recovery efficiencies of this method are in a range of 97.0%-102.5% in freshwater samples. But there is a decreasing effect, which is about 0.2 times the added Ni （Ⅱ） in seawater medium. After reasonable calibration this processing method is used for the determination of Ni （Ⅱ） in seawater samples successfully. The results show this developed method has high accuracy and precision, high sensitivity, large range of linearity and high speed. The method can, therefore, be employed at room temperature.

Optimization Design of Magnetic Field on Cold Yoke Superconducting Solenoid

The optimized design of magnetic field for a cold yoke superconducting solenoid is introduced in this paper. Using some kinds of optimization designs and OPERA,we optimize the main solenoid,cold yoke and compensated winding.Through this design,the requests of the superconducting solenoid are realized.

Optimal Training Design and Placement for MIMO Orthogonal Frequency Division Multiplexing Channel Estimation

This paper deals with optimal training design and placement over multiple orthogonal frequency division multiplexing(OFDM) symbols for the least squares(LS) channel estimation in multiple-input multipleoutput(MIMO) OFDM systems.First,the optimal pilot sequences over multiple OFDM symbols are derived by co-cyclic Jacket matrices based on the minimum mean square error(MSE) of the LS channel estimation.Then,an enhanced channel estimation method using sliding window is proposed to improve further the performance for the optimal pilot sequences in fast-varying channels.Simulation results show that the enhancedmethod can efficiently improve the performances for the optimal pilot sequences over two and four OFDM symbols,especially in fast-varying channels.