To obtain a complete picture of the epoxy asphalt pavement condition on the Second Nanjing Yangtze River Bridge, an on-site survey is conducted to collect information regarding traffic composition and extents of pavem...To obtain a complete picture of the epoxy asphalt pavement condition on the Second Nanjing Yangtze River Bridge, an on-site survey is conducted to collect information regarding traffic composition and extents of pavement distresses. The survey shows that 30 m2 out of the entire 3.8 × 104 m2 pavement exhibits potholes and alligator cracks. Other surface cracks are also found, including regular longitudinal cracks, short hairline cracks, bubble cracks, and ring cracks. Rutting and shoving are not observed on the pavement. The causes of pavement distresses are discussed by analyzing the pavement mechanical response with actual traffic composition. Research results indicate that the regular longitudinal cracks occurring at ribs near wheelpaths are due to fatigue damage. Short hair cracking and bubble cracking are mainly related to construction defects. Alligator cracks are the results of the development of regular, short hair and bubble cracks lacking effective maintenance. Potholes are induced by the cracking and moisture ingression.展开更多
The important parameters that influence the mechanical property of the pavinglayer on an orthotropic steel bridge deck are the paving layer thickness and modulus of the asphaltconcrete surfacing. Three important indic...The important parameters that influence the mechanical property of the pavinglayer on an orthotropic steel bridge deck are the paving layer thickness and modulus of the asphaltconcrete surfacing. Three important indices that control the typical failures of the paving layerare the maximum tensile stress of paving layer, the maximum shear stress between the steel deck andthe paving layer, and the maximum deflection on the paving surface. In this paper, the analyticalmodel of paving systems on orthotropic steel bridge deck is established, and the finite elementmethod is adopted to study the stress and strain of paving system. With the variation of asphaltconcrete modulus in high or low temperature season, the influences of paving layer thickness onthree control indices are researched. The results provide a theoretical basis for the determinationof thickness of the paving layer on the steel bridge deck.展开更多
In this paper, an FEM （Finite Element Method） model is established for the main span of the bridge, with the main box arch and suspender members modeled by beam elements, truss members by truss elements, and the ort...In this paper, an FEM （Finite Element Method） model is established for the main span of the bridge, with the main box arch and suspender members modeled by beam elements, truss members by truss elements, and the orthotropic steel deck by plate elements. The natural frequencies and mode shapes are acquired by the eigen-parameter analysis. By input of a typical earthquake excitation to the bridge system, the dynamic responses of the bridge, including the displacement and accelerations of the main joints of the structure, and the seismic forces and stresses of the key members, are calculated by the structural analysis program, based on which the main laws of the seismic responses of the bridge are summarized, and the safety of the structure is evaluated.展开更多
On the basis of the actual steel deck structure of Taizhou Bridge, this paper carries out hot-spot stress analysis on some key spots by using the finite element model which simulates local structure of orthotropic ste...On the basis of the actual steel deck structure of Taizhou Bridge, this paper carries out hot-spot stress analysis on some key spots by using the finite element model which simulates local structure of orthotropic steel bridge decks. A finite element model is established for local structure of orthotropic steel bridge decks, and in the analysis of linear elasticity of the structure, face load is employed to simulate the loads from vehicle wheels. Analysis results show that main stresses are relatively heavy at the joints between diaphragm plates, top plates and U-shaped ribs and the joints between diaphragm plates and U-shaped ribs. These joints shall be regarded as key points for hot-spot stress analysis. Different mesh densities are adopted in the finite element model and the main stresses at different hot spots are contrasted and linear extrapolation is carried out using extrapolation formulae. Results show that different mesh densities have different influences on the hot-spot stresses at the welded seams of U-shaped ribs. These influences shall be considered in calculation and analysis.展开更多
基金The National Key Technology R&D Program during the 11th Five-Year Plan Period(No.2009BAG15B03)
文摘To obtain a complete picture of the epoxy asphalt pavement condition on the Second Nanjing Yangtze River Bridge, an on-site survey is conducted to collect information regarding traffic composition and extents of pavement distresses. The survey shows that 30 m2 out of the entire 3.8 × 104 m2 pavement exhibits potholes and alligator cracks. Other surface cracks are also found, including regular longitudinal cracks, short hairline cracks, bubble cracks, and ring cracks. Rutting and shoving are not observed on the pavement. The causes of pavement distresses are discussed by analyzing the pavement mechanical response with actual traffic composition. Research results indicate that the regular longitudinal cracks occurring at ribs near wheelpaths are due to fatigue damage. Short hair cracking and bubble cracking are mainly related to construction defects. Alligator cracks are the results of the development of regular, short hair and bubble cracks lacking effective maintenance. Potholes are induced by the cracking and moisture ingression.
文摘The important parameters that influence the mechanical property of the pavinglayer on an orthotropic steel bridge deck are the paving layer thickness and modulus of the asphaltconcrete surfacing. Three important indices that control the typical failures of the paving layerare the maximum tensile stress of paving layer, the maximum shear stress between the steel deck andthe paving layer, and the maximum deflection on the paving surface. In this paper, the analyticalmodel of paving systems on orthotropic steel bridge deck is established, and the finite elementmethod is adopted to study the stress and strain of paving system. With the variation of asphaltconcrete modulus in high or low temperature season, the influences of paving layer thickness onthree control indices are researched. The results provide a theoretical basis for the determinationof thickness of the paving layer on the steel bridge deck.
基金Acknowledgments： This study is sponsored by the Natural Science Foundation of China （No. 90715008） and the Flander （Belgium）-China Bilateral Project （No. BIL07/07）.
文摘In this paper, an FEM （Finite Element Method） model is established for the main span of the bridge, with the main box arch and suspender members modeled by beam elements, truss members by truss elements, and the orthotropic steel deck by plate elements. The natural frequencies and mode shapes are acquired by the eigen-parameter analysis. By input of a typical earthquake excitation to the bridge system, the dynamic responses of the bridge, including the displacement and accelerations of the main joints of the structure, and the seismic forces and stresses of the key members, are calculated by the structural analysis program, based on which the main laws of the seismic responses of the bridge are summarized, and the safety of the structure is evaluated.
基金National Science and Technology Support Program of China(No.2009BAG15B02)Key Programs for Science and Technology Development of Chinese Transportation Industry(No.2008-353-332-180)+1 种基金"333 High-level Personnel Training Project"Special Funded Projects in Jiangsu ProvinceJiangsu Communications Science Research Program(No.08Y29-16)
文摘On the basis of the actual steel deck structure of Taizhou Bridge, this paper carries out hot-spot stress analysis on some key spots by using the finite element model which simulates local structure of orthotropic steel bridge decks. A finite element model is established for local structure of orthotropic steel bridge decks, and in the analysis of linear elasticity of the structure, face load is employed to simulate the loads from vehicle wheels. Analysis results show that main stresses are relatively heavy at the joints between diaphragm plates, top plates and U-shaped ribs and the joints between diaphragm plates and U-shaped ribs. These joints shall be regarded as key points for hot-spot stress analysis. Different mesh densities are adopted in the finite element model and the main stresses at different hot spots are contrasted and linear extrapolation is carried out using extrapolation formulae. Results show that different mesh densities have different influences on the hot-spot stresses at the welded seams of U-shaped ribs. These influences shall be considered in calculation and analysis.
