高效筛分设备在新集一矿选煤厂应用对比分析

本文从分选原理、分选工艺、分选设备、分选效果、经济效益等方面,对原煤筛分设备正旋滚轴筛和螺旋筛进行了对比分析,结合中煤新集一矿选煤厂的生产进行了论证。

任意大于25的偶数的一个性质

证明了每个大于 2 5的偶数都能表示成两个素数的和 ,并且表示的方法种数为 :Dp(N)≥ 2k-3 .

SAPO-34 synthesized with n-butylamine as a template and its catalytic application in the methanol amination reaction

SAPO-34 was synthesized with n-butylamine（BA） as a template for the first time.Crystallization temperature and initial Si amount were important factors leading to successful syntheses.Lamellar AlPO-kanemite tends to form as the major phase or as an impurity of SAPO-34 at lower crystallization temperatures,though a higher initial Si amount may offer a positive effect on the crystallization of SAPO-34 that mitigates the low temperature.Higher temperature（240℃） can effectively suppress the generation of lamellar materials and allow the synthesis of pure SAPO-34 with a wider range of Si incorporation.The crystallization processes at 200 and 240℃ were investigated and compared.We used the aminothermal method to synthesize SAPO-34-BA at 240℃ and also found n-propylamine is a suitable template for the synthesis of SAPO-34.The SAPO-34-BA products were characterized by many techniques.SAPO-34-BA has good thermal stability,crystallinity and porosity.BA remained intact in the crystals with ~1.8 BA molecule per chabazite cage.The catalytic performance of SAPO-34 was tested in the methanol amination reaction,which showed high methanol conversion and selectivity for methylamine plus dimethylamine under the conditions investigated,suggesting that this material is a good candidate for the synthesis of methylamines.

Screening for genetic loci affecting the active zone formation in C. elegans

Objective To screen and identify genetic loci affecting the active zone formation in C. elegans. Methods A SYD-2：：GFP reporter was constructed and used as an active zone marker for forward genetic screen to identify genetic loci affecting the active zone formation. Results Eight isolated mutant alleles were characterized from 15,000 haploid genomes. The SYD-2：：GFP phenotypes of these mutants are mainly reflected as the changes of number, morphology, distribution of puncta and the gaps appearance. Some mutants also exhibit visible behavioral or physical phenotypes, and aldicarb resistant or sensitive phenotypes. Conclusion These mutants provide the opportunity for further systematic research on the active zone formation and the neurotransmission.

Effect of metal content on the activity and product selectivity of n-decane hydroisomerization over Ni-Pd/HY zeolite

Metal-loaded zeolite catalysts were synthesized and examined in the hydroisomerization of n-decane.Specifically,zeolite Y was impregnated with 0.1 wt%Pd and varying amounts of Ni（0.1-0.5 wt%].The crystallinity of the metal-loaded catalysts was characterized by X-ray diffraction,and the average metal particle size was determined by transmission electron microscopy.The states of Pd and Ni were identified by X-ray photoelectron spectroscopy.Ammonia temperature-programmed desorption analysis revealed the occurrence of ion-exchange of some of the catalyst acid sites with Ni-（2＋）.The reducibility of the HY zeolite-supported Pd,Ni,and Pd-Ni catalysts was studied by temperature-programmed reduction.The hydroisomerization of n-decane over the prepared catalyst was conducted at 200-450℃ under 1 atm.Ni addition of up to 0.3 wt%over 0.1 wt%Pd/HY enhanced the n-decane conversion and isomerization product selectivity.The improved selectivity of the mono- and dibranched isomers suggested the occurrence of a protonated cyclopropane intermediate mechanism.However,further Ni addition above 0.3 wt%considerably reduced the activity and isomerization selectivity.The bimetallic catalysts were more selective toward the formation of dibranched isomers,i.e.,those containing a higher octane number.

Research on Numerical Simulation for Flow Field in a Jigger

Jigger is the main equipment in coal processing industry in China, which is developed towards large-scale device. By using the homemade device LTX-35 jigger as a model employing mesh division with non-orthogonal mesh for different kinds of through-flow passage, and completing the numerical simulation with the computational fluid dynamics (CDF) software-PHOENICS, the velocity distribution in different flow fields resulting from guide plates of varied structures are obtained. The results from the simulation show that 1 ) the degree of velocity uniformity of the flow field can be improved if a flat guide plate is replaced by a curved one in the jigger; 2) the best result can be achieved by using a semicircular guide plate.

Rare Earth Metals Ion-exchanged β-Zeolites as Supports of Platinum Catalysts for Hydroisomerization of n-Heptane

A series of Pt catalysts supported on the Hβ-zeolite that is ion-exchanged with the rare earth metal ions of Ce（III） and La（III）,are prepared by impregnation,characterized by inductively coupled plasma （ICP）,X-ray diffraction （XRD）,BET,temperature-programmed desorption of ammonia （NH3-TPD）,temperature-programmed reduction of hydrogen （H2-TPR） and H2-chemisorption techniques,and evaluated in the hydroisomerization of n-heptane with an atmospheric fixed-bed reactor.The reaction temperature,time on stream,space velocity,and the ratio of H2/n-heptane are changed to get the optimal conditions.The Ce（III） and La（III）-exchanged Hβ-zeolites exhibit higher selectivity for isomerized products than the neat Hβ-zeolite.Moreover,the Ce（III）-exchanged catalysts give higher conversions of n-heptane,whereas the La（III）-exchanged ones do not show any improvement in con-version.Under optimal conditions,the catalyst with 0.4% （by mass） Pt and 0.5% （by mass） Ce loading presents very high selectivity of isomerized products of 95.1% coupled with high n-heptane conversion of 68.7%.Effects of the ion-exchange of Ce（III） and La（III） on the catalytic performance are discussed in relation with the physico-chemical properties of catalysts.

Disproportionation of Toluene by Modified ZSM-5 Zeolite Catalysts with High Shape-selectivity Prepared Using Chemical Liquid Deposition with Tetraethyl Orthosilicate

Shape-selective catalysts for the disproportionation of toluene were prepared by the modification of the cylinder-shaped ZSM-5 zeolite extrudates with chemical liquid deposition with TEOS （tetraethyl orthosilicate）.Various parameters for preparing catalysts were changed to investigate the suitable conditions.The resulting cata-lysts were tested in a pressured fixed bed reactor and characterized by SEM （scanning electron microscopy）.The conversion of toluene and para-xylene selectivity were influenced remarkably by the n（SiO2）/n（Al2O3） ratio of ZSM-5 zeolite,the type and amount of deposition agent,acid and solvent used,and the time and cycle of deposition treatment.TEOS was proved to be a more efficient agent than the conventional polysiloxanes when the deposition amount was low.The catalyst prepared at the suitable conditions exhibited a high para-xylene selectivity of 91.1% with considerable high conversion of 25.6%.SEM analyses confirmed the formation of a layer of amorphous silica on the external surface of ZSM-5 zeolie crystals,which was responsible for the highly enhanced shape-selectivity.

SUPERSATURATED DESIGN WITH MORE THAN TWO LEVELS

Supersaturated designs are useful in screening experiments. This paper discusses the topic of multi-level supersaturated design. Two quantities, E(d2) and Df, are proposed to evaluate the optimality of supersaturated designs. A lower bound of E(d2) is obtained with a necessary condition for achieving it. Some E(d2)-optimal supersaturated designs of 3, 4, and 5 levels are given.