120 pearl oysters （Pinctada martensii） were randomly sampled from F1 population, and shell length, shell width, shell height, shell weight and total weight of each sample were measured. Correlation and path analysis...120 pearl oysters （Pinctada martensii） were randomly sampled from F1 population, and shell length, shell width, shell height, shell weight and total weight of each sample were measured. Correlation and path analysis were conducted on the basis of measurement data. The results showed that shell length, shell width, shell height, shell weight and total weight were significantly correlated （P 〈 0.05）. Total weight was significantly and positively correlated with shell weight （r = 0.8970）, shell height （r = 0.6974）, shell width （r = 0.6521） and shell length （r = 0.5486）. Shell weight, shell height, shell width and shell length had positive and direct effects on total wet weight, with the values of 0.6356, 0.1872, 0.1814 and 0.0599, respectively. The results indicated that growth traits （shell length, shell width, shell height, shell weight and total wet weigh） of the F1 population could be improved by direct or indirect selection.展开更多
Our journey to Lugu Lake, a beautiful resort in the northwest tip of Yunnan Province, was full of steep mountains and bumpy roads. But the landscape on the way was extraordinary： yellow rape blossoms flourished along...Our journey to Lugu Lake, a beautiful resort in the northwest tip of Yunnan Province, was full of steep mountains and bumpy roads. But the landscape on the way was extraordinary： yellow rape blossoms flourished along roads; the plateau grassland was dotted with many anonymous flowers -- red, purple or yellow; high mountains were permeated by clouds and mists, springs and streams ran down from top of mountains; and goats and yaks grazed leisurelv on mountain slopes in the distance. All those testified to the truth of a popular proverb -- ＂Beautiful landscape is always on the way＂.展开更多
The present study investigated the removal of inorganic arsenic from Pinctada martensii enzymatic hydrolysate through unmodified resin （D296） and Zr（IV）-loaded chelating resin （Zr-D401）. By loading Zr to macropo...The present study investigated the removal of inorganic arsenic from Pinctada martensii enzymatic hydrolysate through unmodified resin （D296） and Zr（IV）-loaded chelating resin （Zr-D401）. By loading Zr to macroporous chelating resin D401, the as exchange adsorption active sites are generated. This transforms D401 from a material that does not have the arsenic adsorption capacity into a material that has excellent arsenic exchange adsorption capacity. The static adsorption experiments were conducted to investigate the optimal removal condition for D296 and Zr-D401. The experimental results show that： the optimum condition for D296 is that T= 25℃, pH= 5, resin additive amount= 1 g （50 mL）-1, and contact time = 10 h, the corresponding arsenic removal rate being 65.7%, and protein loss being 2.33%; the optimum condition for Zr-D401 is that T=25 ℃, pH = 8, resin additive amount= 1 g （50 mL）-1, and contact time=10 h, the corresponding arsenic removal rate being 70.3%, and protein loss being 4.65%. These results show that both of the two resins are effective in arsenic removal for preserving useful substance. Our research provides scientific evidence and advances in the processing technology for heavy metal removal in shellfish.展开更多
A new enzyme (alkaline protease 894) obtained from the marine extremophile Flavobacterium yellowsea (YS-80-122) has exhibited strong substrate-binding and catalytic activity, even at low temperature, but the character...A new enzyme (alkaline protease 894) obtained from the marine extremophile Flavobacterium yellowsea (YS-80-122) has exhibited strong substrate-binding and catalytic activity, even at low temperature, but the characteristics of the hydrolysis with this enzyme are still unclear. The pearl oyster Pinctada martensii was used in this study as the raw material to illustrate the kinetic properties of protease 894. After investigating the intrinsic relationship between the degree of hydrolysis and several factors, including initial reaction pH, temperature, substrate concentration, enzyme concentration, and hydrolysis time, the kinetics model was established. This study showed that the optimal conditions for the enzymatic hydrolysis were an initial reaction pH of 5.0, temperature of 30°C, substrate concentration of 10% (w/v), enzyme concentration of 2 500 U/g, and hydrolysis time of 160 min. The kinetic characteristics of the protease for the hydrolysis of P. martensii were obtained. The inactivation constant was found to be 15.16/min, and the average relative error between the derived kinetics model and the actual measurement was only 3.04%, which indicated a high degree of fitness. Therefore, this study provides a basis for the investigation of the concrete kinetic characteristics of the new protease, which has potential applications in the food industry.展开更多
Serratia marcescens ECUI010, as an extracellular lipase and a significant catalyst, which had been widely employed to catalyze various chemical reactions such as non-specific, stereo-specific hydrolysis and esterifica...Serratia marcescens ECUI010, as an extracellular lipase and a significant catalyst, which had been widely employed to catalyze various chemical reactions such as non-specific, stereo-specific hydrolysis and esterification for industrial biocatalytic applications, was previously mostly expressed intracellularly as inclusion bodies in Escherichia coli. Denaturation and renaturation of inclusion bodies had a significant influence on the lipase activity. Thereupon, our present work described the secretion expression of gene encoding of this lipase in Pichia pastoris GS 115 and characterization of the recombinant enzyme. Firstly, the obtained lipA gene fragment was introduced into P. pastoris expression vector pPIC9K, the lipA gene without its signal sequence were cloned downstream to the alpha-mating factor signal and expressed in P. pastoris GS115 under the control of AOXI promoter, and the recombinant plasmid pPIC9K-lipA was transformed into P. pastoris strain GS115 by electroporation, and this recombinant P. pastoris were identified by PCR. Then lipase activity was detected on BMMY-tributyrin and olive oil agar plates containing Rhodamine B. Transformants with lipase activity by screening were induced 6 days by methanol, one band of 77 kDa protein could be observed by 10% SDS-PAGE. p-nitrophenyl esters of fatty acids were used as the substrates in an automated activity assay of liquid culture media. The pH and temperature optimum of lipase were pH 8.5 and 40℃ respectively. The stability and effects of metal ions and other reagents were also determined. However, the recombinant fusion intended for secretion was efficiently secreted in a percentage of close to 90% and remained stable even in rich medium at high cell density cultures, yielding values of over 4 U of lipase activity per milliliter of culture media supernatant.展开更多
Differentially expressed genes(DEGs)between individuals with high(HC)and low(LC)total carotenoid content(TCC)were sampled from a selected line of Pinctada fucata martensii with black shell in the prismatic layer.The e...Differentially expressed genes(DEGs)between individuals with high(HC)and low(LC)total carotenoid content(TCC)were sampled from a selected line of Pinctada fucata martensii with black shell in the prismatic layer.The expression levels of candidate genes were verified by qRT-PCR.Targeted resequencing was used to detect SNPs in a candidate gene,PmSR-BI.The association of TCC with SNPs in PmSR-BI was determined.Results showed that a total of 1025 DEGs were identified between HC and LC.The expression levels of the candidate gene PmSR-BI in HC were higher than those in LC.Seven SNPs in the exon and eight SNPs in the 5′regulatory regions of PmSR-BI were found.Association analysis showed that one SNP in the exon and two SNPs in the 5′regulatory regions of PmSR-BI were significantly associated with the TCC(P<0.05).All SNPs of PmSR-BI were divided into four blocks.CC haplotype in Block 1 and AG haplotype in Block 3 were significantly higher than other haplotypes.These results help elucidate the mechanism underlying carotenoid metabolism and develop marker-assisted breeding design in the species.展开更多
According literature, the induction of Yarrowia lipolytica alkaline protease promoter （PXPR2） is efficient in pH 〉 6.0 and with high peptone dose. To establish optimal pH and peptone concentration for induction of ...According literature, the induction of Yarrowia lipolytica alkaline protease promoter （PXPR2） is efficient in pH 〉 6.0 and with high peptone dose. To establish optimal pH and peptone concentration for induction of invertase gene （suc2 of Saccharomyces cerevisaie） under PXPR2 in new Y. lipolytica A-101 invertase positive （Suc＋） transformants their growth on Bioscreen C was analyzed. Minimal mineral medium with thiamine （MMT） and sucrose （1%）, adjusted to pH from 5.8 to 7.6 and supplemented by 0-0.1% of peptone was used. Biomass （OD）, maximal specific growth rate （μmax） and consumed sucrose were measured. Maximal yeasts growth, resulting from the optimal PXPR2 induction, was observed at pH 7.2 and with very low peptone doses （0.0025% and 0.01%）. For five clones （A-101 1356-5; A-101 B54-6; A-101 B57-4; A-101 A18 and W29 ura3-302） only 0.005% of peptone was needed. Amount of hydrolyzed sucrose varied from 24% to 83% and μmax from 0.06 to 0.28 hl. Suc^＋ clones differ in growth parameters, so the site of yeast cassette integration into genome influences expression level of suc2 under PXPR2. Designing large scale processes with Y. lipolytica Suc^＋ clones peptone concentration has to be 100 times smaller than recommended so far.展开更多
基金grants of the Guangdong Marine and Fishery Bureau(No.B02068)Guangdong Ocean University(No.E06031).
文摘120 pearl oysters （Pinctada martensii） were randomly sampled from F1 population, and shell length, shell width, shell height, shell weight and total weight of each sample were measured. Correlation and path analysis were conducted on the basis of measurement data. The results showed that shell length, shell width, shell height, shell weight and total weight were significantly correlated （P 〈 0.05）. Total weight was significantly and positively correlated with shell weight （r = 0.8970）, shell height （r = 0.6974）, shell width （r = 0.6521） and shell length （r = 0.5486）. Shell weight, shell height, shell width and shell length had positive and direct effects on total wet weight, with the values of 0.6356, 0.1872, 0.1814 and 0.0599, respectively. The results indicated that growth traits （shell length, shell width, shell height, shell weight and total wet weigh） of the F1 population could be improved by direct or indirect selection.
文摘Our journey to Lugu Lake, a beautiful resort in the northwest tip of Yunnan Province, was full of steep mountains and bumpy roads. But the landscape on the way was extraordinary： yellow rape blossoms flourished along roads; the plateau grassland was dotted with many anonymous flowers -- red, purple or yellow; high mountains were permeated by clouds and mists, springs and streams ran down from top of mountains; and goats and yaks grazed leisurelv on mountain slopes in the distance. All those testified to the truth of a popular proverb -- ＂Beautiful landscape is always on the way＂.
基金supported by National Key Technologies R&D Program of China(2008 BAD94B08)
文摘The present study investigated the removal of inorganic arsenic from Pinctada martensii enzymatic hydrolysate through unmodified resin （D296） and Zr（IV）-loaded chelating resin （Zr-D401）. By loading Zr to macroporous chelating resin D401, the as exchange adsorption active sites are generated. This transforms D401 from a material that does not have the arsenic adsorption capacity into a material that has excellent arsenic exchange adsorption capacity. The static adsorption experiments were conducted to investigate the optimal removal condition for D296 and Zr-D401. The experimental results show that： the optimum condition for D296 is that T= 25℃, pH= 5, resin additive amount= 1 g （50 mL）-1, and contact time = 10 h, the corresponding arsenic removal rate being 65.7%, and protein loss being 2.33%; the optimum condition for Zr-D401 is that T=25 ℃, pH = 8, resin additive amount= 1 g （50 mL）-1, and contact time=10 h, the corresponding arsenic removal rate being 70.3%, and protein loss being 4.65%. These results show that both of the two resins are effective in arsenic removal for preserving useful substance. Our research provides scientific evidence and advances in the processing technology for heavy metal removal in shellfish.
基金Supported by the Comprehensive Strategic Cooperation Programs between Guangdong Province and Chinese Academy of Sciences(No.2011A090100008)the Knowledge Innovation Program of Chinese Academy of Sciences(No.KZCX2-EW-Q214)
文摘A new enzyme (alkaline protease 894) obtained from the marine extremophile Flavobacterium yellowsea (YS-80-122) has exhibited strong substrate-binding and catalytic activity, even at low temperature, but the characteristics of the hydrolysis with this enzyme are still unclear. The pearl oyster Pinctada martensii was used in this study as the raw material to illustrate the kinetic properties of protease 894. After investigating the intrinsic relationship between the degree of hydrolysis and several factors, including initial reaction pH, temperature, substrate concentration, enzyme concentration, and hydrolysis time, the kinetics model was established. This study showed that the optimal conditions for the enzymatic hydrolysis were an initial reaction pH of 5.0, temperature of 30°C, substrate concentration of 10% (w/v), enzyme concentration of 2 500 U/g, and hydrolysis time of 160 min. The kinetic characteristics of the protease for the hydrolysis of P. martensii were obtained. The inactivation constant was found to be 15.16/min, and the average relative error between the derived kinetics model and the actual measurement was only 3.04%, which indicated a high degree of fitness. Therefore, this study provides a basis for the investigation of the concrete kinetic characteristics of the new protease, which has potential applications in the food industry.
文摘Serratia marcescens ECUI010, as an extracellular lipase and a significant catalyst, which had been widely employed to catalyze various chemical reactions such as non-specific, stereo-specific hydrolysis and esterification for industrial biocatalytic applications, was previously mostly expressed intracellularly as inclusion bodies in Escherichia coli. Denaturation and renaturation of inclusion bodies had a significant influence on the lipase activity. Thereupon, our present work described the secretion expression of gene encoding of this lipase in Pichia pastoris GS 115 and characterization of the recombinant enzyme. Firstly, the obtained lipA gene fragment was introduced into P. pastoris expression vector pPIC9K, the lipA gene without its signal sequence were cloned downstream to the alpha-mating factor signal and expressed in P. pastoris GS115 under the control of AOXI promoter, and the recombinant plasmid pPIC9K-lipA was transformed into P. pastoris strain GS115 by electroporation, and this recombinant P. pastoris were identified by PCR. Then lipase activity was detected on BMMY-tributyrin and olive oil agar plates containing Rhodamine B. Transformants with lipase activity by screening were induced 6 days by methanol, one band of 77 kDa protein could be observed by 10% SDS-PAGE. p-nitrophenyl esters of fatty acids were used as the substrates in an automated activity assay of liquid culture media. The pH and temperature optimum of lipase were pH 8.5 and 40℃ respectively. The stability and effects of metal ions and other reagents were also determined. However, the recombinant fusion intended for secretion was efficiently secreted in a percentage of close to 90% and remained stable even in rich medium at high cell density cultures, yielding values of over 4 U of lipase activity per milliliter of culture media supernatant.
基金The research was financially supported by Science and Technology Program of Guangdong Province(Grant No.2021B0202020003,and 2022A1515010030)National Natural Science Foundation of China(Grant No.32102817)+2 种基金Department of Education of Guangdong Province(Grant No.2019KQNCX043,2020ZDZX1045 and 2021KCXTD026)Special promotion of fishery science and technology of Ocean and Fisheries Bureau of Guangdong Province(Grant No.B201601-Z09)the earmarked fund for CARS-49.
文摘Differentially expressed genes(DEGs)between individuals with high(HC)and low(LC)total carotenoid content(TCC)were sampled from a selected line of Pinctada fucata martensii with black shell in the prismatic layer.The expression levels of candidate genes were verified by qRT-PCR.Targeted resequencing was used to detect SNPs in a candidate gene,PmSR-BI.The association of TCC with SNPs in PmSR-BI was determined.Results showed that a total of 1025 DEGs were identified between HC and LC.The expression levels of the candidate gene PmSR-BI in HC were higher than those in LC.Seven SNPs in the exon and eight SNPs in the 5′regulatory regions of PmSR-BI were found.Association analysis showed that one SNP in the exon and two SNPs in the 5′regulatory regions of PmSR-BI were significantly associated with the TCC(P<0.05).All SNPs of PmSR-BI were divided into four blocks.CC haplotype in Block 1 and AG haplotype in Block 3 were significantly higher than other haplotypes.These results help elucidate the mechanism underlying carotenoid metabolism and develop marker-assisted breeding design in the species.
文摘According literature, the induction of Yarrowia lipolytica alkaline protease promoter （PXPR2） is efficient in pH 〉 6.0 and with high peptone dose. To establish optimal pH and peptone concentration for induction of invertase gene （suc2 of Saccharomyces cerevisaie） under PXPR2 in new Y. lipolytica A-101 invertase positive （Suc＋） transformants their growth on Bioscreen C was analyzed. Minimal mineral medium with thiamine （MMT） and sucrose （1%）, adjusted to pH from 5.8 to 7.6 and supplemented by 0-0.1% of peptone was used. Biomass （OD）, maximal specific growth rate （μmax） and consumed sucrose were measured. Maximal yeasts growth, resulting from the optimal PXPR2 induction, was observed at pH 7.2 and with very low peptone doses （0.0025% and 0.01%）. For five clones （A-101 1356-5; A-101 B54-6; A-101 B57-4; A-101 A18 and W29 ura3-302） only 0.005% of peptone was needed. Amount of hydrolyzed sucrose varied from 24% to 83% and μmax from 0.06 to 0.28 hl. Suc^＋ clones differ in growth parameters, so the site of yeast cassette integration into genome influences expression level of suc2 under PXPR2. Designing large scale processes with Y. lipolytica Suc^＋ clones peptone concentration has to be 100 times smaller than recommended so far.
