Experiments on grouting-reinforced rock mass specimens with different particle sizes and features were carried out in this study to examine the effects of grouting reinforcement on the load-bearing characteristics of ...Experiments on grouting-reinforced rock mass specimens with different particle sizes and features were carried out in this study to examine the effects of grouting reinforcement on the load-bearing characteristics of fractured rock mass.The strength and deformation features of grouting-reinforced rock mass were analyzed under different loading manners;the energy evolution mechanism of grouting-reinforced rock mass specimens with different particle sizes and features was investigated;the energy dissipation ratio and post-peak stress decreasing rate were employed to evaluate the bearing stability of grouting-reinforced rock mass.The results show that the strength and ductility of granite-reinforced rock mass(GRM)under biaxial loading are higher than that of sandstone-reinforced rock mass(SRM)under uniaxial loading.Besides,the energy evolution characteristics of grouting-reinforced rock mass under uniaxial and biaxial loading mainly could be divided into early,middle,and late stages.In the early stage,total,elastic,and dissipation energies were quite small with flatter curves;in the middle stage,elastic energy increased rapidly,whereas dissipation energy increased slowly;in the late stage,dissipation energy increased sharply.The energy dissipation ratio was used to represent the pre-peak plastic deformation.Under uniaxial loading,this ratio increased as the particle size increased and the pre-peak plastic deformation of grouting-reinforced rock mass became larger;under biaxial loading,it dropped as the particle size increased,and the pre-peak plastic deformation of grouting-reinforced rock mass became smaller.The post-peak stress decline rate A_(v) was used to assess the post-peak bearing performance of grouting-reinforced rock mass.Under uniaxial loading,parameter A_(v) exhibited reduction as the particle size kept increasing,and the ability of post-peak of grouting-reinforced rock mass to allow deformation development was greater,and the bearing capacity was greater;under biaxial loading,A_(v) increased with the particle size,and the ability of post-peak of grouting-reinforced rock mass to allow deformation development was low and the bearing capacity was reduced.The findings are considered instrumental in improving the stability of the roadway-surrounding rock by granite and sandstone grouting.展开更多
Tight gas sandstone reservoirs in Guang＇an are characterized by wide distribution and low abundance. Sandstone samples from this area usually have low porosity and poor connectivity. We analyze the observed velocity ...Tight gas sandstone reservoirs in Guang＇an are characterized by wide distribution and low abundance. Sandstone samples from this area usually have low porosity and poor connectivity. We analyze the observed velocity data of tight sandstone samples with the Mori- Tanaka model, and give the sandstone framework physical model in this area based on theory and experiment analysis. The matrix modulus was obtained by an empirical relationship and then the experiment data were compared with the values predicted by the Mori-Tanaka model with different pore shapes. The results revealed that the experiment data were close to the model with low pore aspect ratio. Considering the matrix modulus and pore shape variation, we find that, under the condition of small mineral composition change, the effective pore aspect ratio of these samples increased with porosity evidently.展开更多
A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and ...A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and involves the effects of the conical angle of the storage surface, so it can deal with two cases： the conical angle of the storage surface and the flat storage surface. Compared with the two popular methods based on the silo-aspect ratio and the silo rupture plane, respectively, in current engineering design, the new method can give a range of critical aspect ratios to classify deep silos and squat silos according to the conical angle of the storage surface or the fiat storage surface. Moreover, the range covers the critical aspect ratios obtained from the existing classification methods including the Chinese code based on silo aspect ratios, the German code, Reimbert brothers＇ definition and Liang et al. ＇s definition, so it is a more general method to classify silos and the existing methods can be viewed as special cases of the presented method.展开更多
Comparing to its sister-family （Rhinolophidae）, Hipposideridae was less studied by cytogenetic approaches. Only a few high-resolution G-banded karyotypes have been reported so far, and most of the conclusions on the...Comparing to its sister-family （Rhinolophidae）, Hipposideridae was less studied by cytogenetic approaches. Only a few high-resolution G-banded karyotypes have been reported so far, and most of the conclusions on the karyotypic evolution in Hipposideridae were based on conventional Giemsa-staining. In this study, we applied comparative chromosome painting, a method of choice for genome-wide comparison at the molecular level, and G- and C-banding to establish comparative map between five hipposiderid species from China, using a whole set of chromosome-specific painting probes from one of them （Aselliscus stoliczkanus）. G-band and C-band comparisons between homologous segments defined by chromosome painting revealed that Robertsonian translocations, paracentric inversions and heterochromatin addition could be the main mechanism of chromosome evolution in Hipposideridae. Comparative analysis of the conserved chromosomal segments among five hipposiderid species and outgroup species suggests that bi-armed chromosomes should be included into the ancestral karyotype of Hipposideridae, which was previously believed to be exclusively composed of acrocentric chromosomes.展开更多
The analogy between the wave equation of liquid and the Navier equations of structural elasticity is examined in detail. By introducing appropriate parameters, the structural counterpart of the liquid sloshing model c...The analogy between the wave equation of liquid and the Navier equations of structural elasticity is examined in detail. By introducing appropriate parameters, the structural counterpart of the liquid sloshing model can be easily built. Therefore, the dynamic analysis of liquid sloshing can be reduced to that of structural elasticity, and the existing FEM structural analysis computer programs can be applied to liquid sloshing analysis without any modification. The present method also reveals the internal relationship between liquid sloshing and structural vibration. The effectiveness and reliability of the method is illustrated by the numerical example.展开更多
The specific heat capacities of Cu60Zr20Hfl0Til0 bulk metallic glass （BMG） and crystallized alloys were measured from 2 to 101 K. The effect of crystallization on the specific heat capacity of the BMG was studied. T...The specific heat capacities of Cu60Zr20Hfl0Til0 bulk metallic glass （BMG） and crystallized alloys were measured from 2 to 101 K. The effect of crystallization on the specific heat capacity of the BMG was studied. The effects of crystallization and the relationship between local modes and boson peak in the BMG were discussed. The specific heat capacity deviates from the simple Debye behaviors, showing the presence of local harmonic modes （Einstein oscillator） in the BMG and the crystallized alloy. Model calculation includes the contribution of one Debye mode and two Einstein modes for the BMG, one Debye mode and one Einstein mode for the crystallized alloy, showing an adequate description of the experimental data.展开更多
Room-temperature mechanical properties of Cu50Zr40Ti10-xNix（0≤x≤4,mole fraction,%） bulk metallic glasses （BMG） with aspect ratios in the range of 1：1-2.5：1 and loading rates in the range of1×10^-5-1×...Room-temperature mechanical properties of Cu50Zr40Ti10-xNix（0≤x≤4,mole fraction,%） bulk metallic glasses （BMG） with aspect ratios in the range of 1：1-2.5：1 and loading rates in the range of1×10^-5-1×10^-2s^-1were systematically investigated by room-temperatureuniaxialcompression test.In the condition of an aspect ratio of 1：1, the superplasticity can be clearly observed for Cu50Zr40Ti10BMG when the loading rate is1×10^-4s^-1, while for Cu50Zr40Ti10-xNix（x=1-3, mole fraction, %） BMGs when the loading rate is1×10^-2s^-1. The plastic strain （εp）, yielding strength （σy） and fracture strength （σf） of the studied Cu-based BMGs significantly depend on the aspect ratio and the loading rate. In addition, theσyof the studied Cu-based BMGs with an aspect ratio of 1：1 is close to the σfof those with the other aspect ratios when the loading rate is1×10^-2s^-1. The mechanism for the mechanical response to the loading rate and the aspect ratiowas also discussed.展开更多
Based on the theory of thematic complexity, a contrastive analysis on 2 sections selected from research articles-method and discussion, was conducted. The differences and similarities between the 2 sections in simple ...Based on the theory of thematic complexity, a contrastive analysis on 2 sections selected from research articles-method and discussion, was conducted. The differences and similarities between the 2 sections in simple theme, multiple theme, textual theme, interpersonal theme, topical theme and thematic progression were analyzed and concluded. The author believes that the causes of the differences and similarities are the different genre features of the 2 sections and the academic features of the materials selected.展开更多
According to the principles of simultaneous equilibrium and mass equilibrium, a series of thermodynamic equilibrium equations in Ni（II）-Co（II）-C2O4^2--NH3-NH4^＋-H2O system at ambient temperature were deduced. The...According to the principles of simultaneous equilibrium and mass equilibrium, a series of thermodynamic equilibrium equations in Ni（II）-Co（II）-C2O4^2--NH3-NH4^＋-H2O system at ambient temperature were deduced. The diagrams of logarithm ion concentrations versus pH values at different solution compositions were drawn. The results show that Ni^2＋ and Co^2＋ can completely precipitate at pH less than 5.0 and the predefined Ni/Co ratios can be well kept in the precursor. The precursor morphology is granular aggregation. However, rod aggregation precursor is obtained in the pH range of 5.0-8.0, and fibre-shape precursor is got at pH value higher than 8.0. The Ni/Co ratios in the above two precursors are not reproduced as that in the feed due to the formhtion of multi-coordinated Ni（NH3）n^2＋ and Co（NH3）n^2＋ （n=1-6）. Modification of precipitation medium is favorable for the precursors to keep the predefined Ni/Co ratios of the feed in the pH range of 2.0-8.6. Meanwhile, the precursors with fibrous morphology can be obtained.展开更多
基金Project(2023YFC2907600)supported by the National Key Research and Development Program of ChinaProject(202203a07020011)supported by the Major Science and Technology Projects of Anhui Province,China+4 种基金Project(T2021137)supported by the National Talent Project,ChinaProject(T000508)supported by the Leading Talent Project of the Special Support Plan of Anhui Province,ChinaProject(GXXT-2021-075)supported by the University Synergy Innovation Program of Anhui Province,ChinaProject(2022AH010053)supported by the Excellent Scientific Research and Innovation Team of Universities in Anhui Province,ChinaProject(2022CX1004)supported by the Anhui University of Science and Technology Postgraduate Innovation Fund Project,China。
文摘Experiments on grouting-reinforced rock mass specimens with different particle sizes and features were carried out in this study to examine the effects of grouting reinforcement on the load-bearing characteristics of fractured rock mass.The strength and deformation features of grouting-reinforced rock mass were analyzed under different loading manners;the energy evolution mechanism of grouting-reinforced rock mass specimens with different particle sizes and features was investigated;the energy dissipation ratio and post-peak stress decreasing rate were employed to evaluate the bearing stability of grouting-reinforced rock mass.The results show that the strength and ductility of granite-reinforced rock mass(GRM)under biaxial loading are higher than that of sandstone-reinforced rock mass(SRM)under uniaxial loading.Besides,the energy evolution characteristics of grouting-reinforced rock mass under uniaxial and biaxial loading mainly could be divided into early,middle,and late stages.In the early stage,total,elastic,and dissipation energies were quite small with flatter curves;in the middle stage,elastic energy increased rapidly,whereas dissipation energy increased slowly;in the late stage,dissipation energy increased sharply.The energy dissipation ratio was used to represent the pre-peak plastic deformation.Under uniaxial loading,this ratio increased as the particle size increased and the pre-peak plastic deformation of grouting-reinforced rock mass became larger;under biaxial loading,it dropped as the particle size increased,and the pre-peak plastic deformation of grouting-reinforced rock mass became smaller.The post-peak stress decline rate A_(v) was used to assess the post-peak bearing performance of grouting-reinforced rock mass.Under uniaxial loading,parameter A_(v) exhibited reduction as the particle size kept increasing,and the ability of post-peak of grouting-reinforced rock mass to allow deformation development was greater,and the bearing capacity was greater;under biaxial loading,A_(v) increased with the particle size,and the ability of post-peak of grouting-reinforced rock mass to allow deformation development was low and the bearing capacity was reduced.The findings are considered instrumental in improving the stability of the roadway-surrounding rock by granite and sandstone grouting.
基金supported by the National Natural Foundation of China (No. 41104066)the Basic Research Programs of CNPC during the 12th Five-Year Plan Period (No. 2011A-3601)+1 种基金the Major State Basic Research Development Program of China (No. 2007CB209505)RIPED Young Innovation Foundation (No. 2010-A-26-01)
文摘Tight gas sandstone reservoirs in Guang＇an are characterized by wide distribution and low abundance. Sandstone samples from this area usually have low porosity and poor connectivity. We analyze the observed velocity data of tight sandstone samples with the Mori- Tanaka model, and give the sandstone framework physical model in this area based on theory and experiment analysis. The matrix modulus was obtained by an empirical relationship and then the experiment data were compared with the values predicted by the Mori-Tanaka model with different pore shapes. The results revealed that the experiment data were close to the model with low pore aspect ratio. Considering the matrix modulus and pore shape variation, we find that, under the condition of small mineral composition change, the effective pore aspect ratio of these samples increased with porosity evidently.
基金The National Key Technologies R & D Program during the 11th Five-Year Plan Period(No.2006BAD08B01)the Program for New Century Excellent Talents in Universities of Henan Province(No.2005HANCET-13)
文摘A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and involves the effects of the conical angle of the storage surface, so it can deal with two cases： the conical angle of the storage surface and the flat storage surface. Compared with the two popular methods based on the silo-aspect ratio and the silo rupture plane, respectively, in current engineering design, the new method can give a range of critical aspect ratios to classify deep silos and squat silos according to the conical angle of the storage surface or the fiat storage surface. Moreover, the range covers the critical aspect ratios obtained from the existing classification methods including the Chinese code based on silo aspect ratios, the German code, Reimbert brothers＇ definition and Liang et al. ＇s definition, so it is a more general method to classify silos and the existing methods can be viewed as special cases of the presented method.
基金supported by grants from the National Natural Science Foundation of China(30770293)the Ministry of Science and Technology of China(2005DKA21502)
文摘Comparing to its sister-family （Rhinolophidae）, Hipposideridae was less studied by cytogenetic approaches. Only a few high-resolution G-banded karyotypes have been reported so far, and most of the conclusions on the karyotypic evolution in Hipposideridae were based on conventional Giemsa-staining. In this study, we applied comparative chromosome painting, a method of choice for genome-wide comparison at the molecular level, and G- and C-banding to establish comparative map between five hipposiderid species from China, using a whole set of chromosome-specific painting probes from one of them （Aselliscus stoliczkanus）. G-band and C-band comparisons between homologous segments defined by chromosome painting revealed that Robertsonian translocations, paracentric inversions and heterochromatin addition could be the main mechanism of chromosome evolution in Hipposideridae. Comparative analysis of the conserved chromosomal segments among five hipposiderid species and outgroup species suggests that bi-armed chromosomes should be included into the ancestral karyotype of Hipposideridae, which was previously believed to be exclusively composed of acrocentric chromosomes.
文摘The analogy between the wave equation of liquid and the Navier equations of structural elasticity is examined in detail. By introducing appropriate parameters, the structural counterpart of the liquid sloshing model can be easily built. Therefore, the dynamic analysis of liquid sloshing can be reduced to that of structural elasticity, and the existing FEM structural analysis computer programs can be applied to liquid sloshing analysis without any modification. The present method also reveals the internal relationship between liquid sloshing and structural vibration. The effectiveness and reliability of the method is illustrated by the numerical example.
基金Project(082102230035)supported by the Foundation of Science and Technology Department of Henan Province,China
文摘The specific heat capacities of Cu60Zr20Hfl0Til0 bulk metallic glass （BMG） and crystallized alloys were measured from 2 to 101 K. The effect of crystallization on the specific heat capacity of the BMG was studied. The effects of crystallization and the relationship between local modes and boson peak in the BMG were discussed. The specific heat capacity deviates from the simple Debye behaviors, showing the presence of local harmonic modes （Einstein oscillator） in the BMG and the crystallized alloy. Model calculation includes the contribution of one Debye mode and two Einstein modes for the BMG, one Debye mode and one Einstein mode for the crystallized alloy, showing an adequate description of the experimental data.
基金Projects(50874045,51301194)supported by the National Natural Science Foundation of ChinaProject(2144057)supported by the Beijing Natural Science Foundation,China
文摘Room-temperature mechanical properties of Cu50Zr40Ti10-xNix（0≤x≤4,mole fraction,%） bulk metallic glasses （BMG） with aspect ratios in the range of 1：1-2.5：1 and loading rates in the range of1×10^-5-1×10^-2s^-1were systematically investigated by room-temperatureuniaxialcompression test.In the condition of an aspect ratio of 1：1, the superplasticity can be clearly observed for Cu50Zr40Ti10BMG when the loading rate is1×10^-4s^-1, while for Cu50Zr40Ti10-xNix（x=1-3, mole fraction, %） BMGs when the loading rate is1×10^-2s^-1. The plastic strain （εp）, yielding strength （σy） and fracture strength （σf） of the studied Cu-based BMGs significantly depend on the aspect ratio and the loading rate. In addition, theσyof the studied Cu-based BMGs with an aspect ratio of 1：1 is close to the σfof those with the other aspect ratios when the loading rate is1×10^-2s^-1. The mechanism for the mechanical response to the loading rate and the aspect ratiowas also discussed.
文摘Based on the theory of thematic complexity, a contrastive analysis on 2 sections selected from research articles-method and discussion, was conducted. The differences and similarities between the 2 sections in simple theme, multiple theme, textual theme, interpersonal theme, topical theme and thematic progression were analyzed and concluded. The author believes that the causes of the differences and similarities are the different genre features of the 2 sections and the academic features of the materials selected.
基金Project (20090162120080) supported by Research Fund for the Doctoral Program of Higher Education of China Project (20070410989) supported by China Postdoctoral Science Foundation+1 种基金 Project (2010FJ3012) supported by the Program of Science and Technology of Hunan Province, China Project (09JJ4028) supported by Natural Science Foundation of Hunan Province, China
文摘According to the principles of simultaneous equilibrium and mass equilibrium, a series of thermodynamic equilibrium equations in Ni（II）-Co（II）-C2O4^2--NH3-NH4^＋-H2O system at ambient temperature were deduced. The diagrams of logarithm ion concentrations versus pH values at different solution compositions were drawn. The results show that Ni^2＋ and Co^2＋ can completely precipitate at pH less than 5.0 and the predefined Ni/Co ratios can be well kept in the precursor. The precursor morphology is granular aggregation. However, rod aggregation precursor is obtained in the pH range of 5.0-8.0, and fibre-shape precursor is got at pH value higher than 8.0. The Ni/Co ratios in the above two precursors are not reproduced as that in the feed due to the formhtion of multi-coordinated Ni（NH3）n^2＋ and Co（NH3）n^2＋ （n=1-6）. Modification of precipitation medium is favorable for the precursors to keep the predefined Ni/Co ratios of the feed in the pH range of 2.0-8.6. Meanwhile, the precursors with fibrous morphology can be obtained.
