In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on...In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on the elastic-plasticity theory, and under the consideration of the effect of tube size, material mechanical parameters, friction coefficient and loading paths, the external pressure plastic forming mechanical model of metal stator screw lining is established, to study the optimal loading path of metal stator lining tube hydroforming process. The results show that wall thickness reduction of the external pressure tube hydroforming(THF) is about 4%, and three evaluation criteria of metal stator screw lining forming quality are presented: fillet stick mold coefficient, thickness relative error and forming quality coefficient. The smaller the three criteria are, the better the forming quality is.Each indicator has a trend of increase with the loading rate reducing, and the adjustment laws of die arc transition zone equidistance profile curve are acquired for improving tube forming quality. Hence, the research results prove the feasibility of external pressure THF used for processing high-accuracy large length-to-diameter ratio metal stator screw lining, and provide theoretical basis for designing new kind of stator structure which has better performance and longer service life.展开更多
SiO_2/Si substrate has been widely used to support two-dimensional （2-D） crystal flakes grown by chemical vapor deposition or prepared by micromechanical cleavage. The visibility of 2-D flakes is very sensitive to t...SiO_2/Si substrate has been widely used to support two-dimensional （2-D） crystal flakes grown by chemical vapor deposition or prepared by micromechanical cleavage. The visibility of 2-D flakes is very sensitive to the thickness of the SiO_2 layer （hsiO_2）, which can not be determined precisely after the deposit of 2-D flakes. Here, we demonstrated a simple, fast and nondestructive tech- nique to precisely determine hsiO_2 of SiO_2 films on Si substrate only by optical contrast measurement with a typical micro-Raman confocal system. Because of its small lateral resolution down to the micrometer scale, this tech- nique can be used to access hsiO_2 on SiO_2/Si substrate that has been partially covered by 2-D crystal flakes, and then further determine the layer number of the 2-D crystal flakes. This technique can be extended to other dielectric multilayer substrates and the layer-number determination of 2-D crystal flakes on those substrates.展开更多
基金Project(51222406)supported by the National Natural Science Foundation of ChinaProject(NCET-12-1061)supported by the Funds for New Century Excellent Talents in University of China+1 种基金Project(12TD007)supported by the Scientific Research Innovation Team Program of Sichuan Colleges and Universities,ChinaProject(2014TD0025)supported by the Youth Scientific Research Innovation Team Program of Sichuan Province,China
文摘In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on the elastic-plasticity theory, and under the consideration of the effect of tube size, material mechanical parameters, friction coefficient and loading paths, the external pressure plastic forming mechanical model of metal stator screw lining is established, to study the optimal loading path of metal stator lining tube hydroforming process. The results show that wall thickness reduction of the external pressure tube hydroforming(THF) is about 4%, and three evaluation criteria of metal stator screw lining forming quality are presented: fillet stick mold coefficient, thickness relative error and forming quality coefficient. The smaller the three criteria are, the better the forming quality is.Each indicator has a trend of increase with the loading rate reducing, and the adjustment laws of die arc transition zone equidistance profile curve are acquired for improving tube forming quality. Hence, the research results prove the feasibility of external pressure THF used for processing high-accuracy large length-to-diameter ratio metal stator screw lining, and provide theoretical basis for designing new kind of stator structure which has better performance and longer service life.
基金supported by the National Natural Science Foundation of China(11225421,11474277 and11434010)
文摘SiO_2/Si substrate has been widely used to support two-dimensional （2-D） crystal flakes grown by chemical vapor deposition or prepared by micromechanical cleavage. The visibility of 2-D flakes is very sensitive to the thickness of the SiO_2 layer （hsiO_2）, which can not be determined precisely after the deposit of 2-D flakes. Here, we demonstrated a simple, fast and nondestructive tech- nique to precisely determine hsiO_2 of SiO_2 films on Si substrate only by optical contrast measurement with a typical micro-Raman confocal system. Because of its small lateral resolution down to the micrometer scale, this tech- nique can be used to access hsiO_2 on SiO_2/Si substrate that has been partially covered by 2-D crystal flakes, and then further determine the layer number of the 2-D crystal flakes. This technique can be extended to other dielectric multilayer substrates and the layer-number determination of 2-D crystal flakes on those substrates.
