期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
动网格生成技术 被引量:38
1
作者 史忠军 徐敏 陈士橹 《空军工程大学学报(自然科学版)》 CSCD 2003年第1期61-64,共4页
基于动气动弹性仿真中二维动网格方法的研究,提出了一种三维动网格生成技术,该方法的主要特点是在计算域内利用原有的初始网格进行插值计算来构造新网格。对于流体-结构耦合中每时间步长计算的动网格算法主要考虑网格的稳定性和计算效... 基于动气动弹性仿真中二维动网格方法的研究,提出了一种三维动网格生成技术,该方法的主要特点是在计算域内利用原有的初始网格进行插值计算来构造新网格。对于流体-结构耦合中每时间步长计算的动网格算法主要考虑网格的稳定性和计算效率。最后,选取了二维、三维中一些有代表性的实例进行了演示,结果表明对于变形量不是很大的情形是令人满意的。 展开更多
关键词 气动弹性仿真 三维动网格生成 计算流体力学 插值计算 流体-结构耦合 计算效率
下载PDF
基于CFD/CSD耦合的高速空气舵系统颤振边界计算
2
作者 顾铭峰 南宫自军 王亮 《战术导弹技术》 北大核心 2021年第3期1-6,27,共7页
高速飞行器空气舵工况愈发恶劣,随着CFD和CSD计算技术的不断发展,高精度的空气舵颤振边界计算相关研究得到学术界广泛关注。采用CFD技术进行非定常气动力的计算,采用CSD技术进行真实舵系统的结构动力学分析,采用径向基函数(RBF)插值的... 高速飞行器空气舵工况愈发恶劣,随着CFD和CSD计算技术的不断发展,高精度的空气舵颤振边界计算相关研究得到学术界广泛关注。采用CFD技术进行非定常气动力的计算,采用CSD技术进行真实舵系统的结构动力学分析,采用径向基函数(RBF)插值的方法实现两种网格的数据交互,从而建立起CFD/CSD耦合计算的气动弹性仿真平台。以文献中的空气舵为例,计算在不同来流工况下的时域响应结果,最终得到该空气舵的颤振临界动压。对比风洞试验结果表明:仿真计算结果与试验结果基本吻合,该气动弹性仿真平台具有较好计算精度,可为空气舵设计提供一定的工程指导。 展开更多
关键词 CFD/CSD耦合 颤振 空气舵 气动弹性仿真 时域 临界动压
原文传递
Studies on aeroservoelasticity semi-physical simulation test for missiles 被引量:16
3
作者 WU ZhiGang CHU LongFei +2 位作者 YUAN RuiZhi YANG Chao TANG ChangHong 《Science China(Technological Sciences)》 SCIE EI CAS 2012年第9期2482-2488,共7页
Missiles may be damaged when aeroservoelastic problem occurs,which is caused by the interaction of structure flexibility and flight control system.Because of the limit of wind tunnel test condition,numerical methods a... Missiles may be damaged when aeroservoelastic problem occurs,which is caused by the interaction of structure flexibility and flight control system.Because of the limit of wind tunnel test condition,numerical methods are mostly used in previous aeroservoelastic studies.However,series of assumptions and simplification on structures,aerodynamics and flight control systems are unavoidably introduced,and various nonlinear factors are also ignored,therefore,they result in considerable errors.A novel method called aeroservoelasticity semi-physical simulation test is proposed in this paper,which takes the flexible missile with control system as the test object.Vibration signals at several locations of the missile are measured by accelerometers,then corresponding unsteady aerodynamics is computed based on the fact that airflow at high Mach is nearly quasi-steady,and finally unsteady aerodynamics is exerted simultaneously by shakers at certain locations of the missile.The aeroservoelasticity semi-physical simulation test system can be constructed after the control system is closed.Open loop transfer function test and closed loop stability test are carried out in sequence.The test principle and method proposed in this paper are verified by the concordance between the results of numerical simulation and experiment. 展开更多
关键词 aeroservoelasticity semi-physical simulation unsteady aerodynamic aerodynamic derivative method SHAKER MISSILE
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部