Photocatalytic CO_(2)conversion efficiency is hampered by the rapid recombination of photogenerated charge carriers.It is effective to suppress the recombination by constructing cocatalysts on photocatalysts with high...Photocatalytic CO_(2)conversion efficiency is hampered by the rapid recombination of photogenerated charge carriers.It is effective to suppress the recombination by constructing cocatalysts on photocatalysts with high-quality interfacial contact.Herein,we develop a novel strategy to in-situ grow ultrathin/V-doped graphene(NG)layer on TiO_(2) hollow spheres(HS) with large area and intimate interfacial contact via a chemical vapor deposition(CVD).The optimized TiO^(2)/NG HS nanocomposite achieves total CO_(2)conversion rates(the sum yield of CO,CH_(3)OH and CH_(4))of 18.11μmol·g^(-1)h^(-1),which is about 4.6 times higher than blank T1O_(2)HS.Experimental results demonstrate that intimate interfacial contact and abundant pyridinic N sites can effectively facilitate photogenerated charge carrier separation and transport,realizing enhanced photocatalytic CO_(2)reduction performance.In addition,this work provides an effective strategy for in-situ construction of graphene-based photocatalysts for highly efficient photocatalytic CO_(2)conversion.展开更多
In this paper, performance of PECVD SiO 2 /Si 3 N 4 double layers electrets with different thicknesses were investigated detailedly in respect of chargeability, storage charge stability in high temperature and reliabi...In this paper, performance of PECVD SiO 2 /Si 3 N 4 double layers electrets with different thicknesses were investigated detailedly in respect of chargeability, storage charge stability in high temperature and reliability in high humidity environment. Samples with different thicknesses of Si 3 N 4 and SiO 2 were prepared on Pyrex 7740 glass substrates and characterized by isothermal and high humidity charge decay. The results of experiment approved that the PECVD SiO 2 /Si 3 N 4 double layers electrets on glass substrate has as good chargeability and charge stability in high temperature and high humidity environment as thermal oxidation or APCVD/LPCVD ones on silicon substrates. The experiment results indicated that a Si 3 N 4 layer no less than 50 nm is necessary for good charge stability in high temperature and a Si 3 N 4 layer thicker than 500 nm decreases the chargeability. Even a 2 nm Si 3 N 4 layer is enough to significantly improve the charge stability in high humidity environment. Thick SiO 2 layer can increase the surface potential of electrets under the same charging condition and its charge stability in high temperature. However, the electrets with high surface potential also exhibit poor uniformity of charge stability in high humidity environment.展开更多
We have successfully employed metal-organic chemical vapor deposition （MOCVD） technique to simultaneously deposit double-sided YBa2Cu3O7-δ （YBCO） films on both sides of YzO3/yttria-stabilized zirconia （YSZ）/Ce...We have successfully employed metal-organic chemical vapor deposition （MOCVD） technique to simultaneously deposit double-sided YBa2Cu3O7-δ （YBCO） films on both sides of YzO3/yttria-stabilized zirconia （YSZ）/CeO2 （YYC） buffered biaxially textured Ni-5 at.% W substrates, which is of great prospect to cut the production cost of YBCO coated conductors. X-ray diffraction analysis revealed that both sides of YBCO film were purely c-axis oriented and highly textured. The co-scan of （005） YBCO and Ф-scan of （103） YBCO yielded full width at half maximum （FWHM） values of 4.9° and 6.6° for one side of double-sided YBCO film, respectively, as well as 4.4° and 6.4° for the other side. The current transportation measurements performed on such double-sided 500 nm-thickness YBCO films showed the self-field critical current density （Jc） at 77 K of 0.6 MA/cm^2 and 1.2 MA/cm^2, respectively. Further research is in the process of exploring new solution to improve the Jc in practice.展开更多
文摘Photocatalytic CO_(2)conversion efficiency is hampered by the rapid recombination of photogenerated charge carriers.It is effective to suppress the recombination by constructing cocatalysts on photocatalysts with high-quality interfacial contact.Herein,we develop a novel strategy to in-situ grow ultrathin/V-doped graphene(NG)layer on TiO_(2) hollow spheres(HS) with large area and intimate interfacial contact via a chemical vapor deposition(CVD).The optimized TiO^(2)/NG HS nanocomposite achieves total CO_(2)conversion rates(the sum yield of CO,CH_(3)OH and CH_(4))of 18.11μmol·g^(-1)h^(-1),which is about 4.6 times higher than blank T1O_(2)HS.Experimental results demonstrate that intimate interfacial contact and abundant pyridinic N sites can effectively facilitate photogenerated charge carrier separation and transport,realizing enhanced photocatalytic CO_(2)reduction performance.In addition,this work provides an effective strategy for in-situ construction of graphene-based photocatalysts for highly efficient photocatalytic CO_(2)conversion.
基金supported by the National Basic Research Program of China ("973" Program) (Grant No. 2009CB320300)
文摘In this paper, performance of PECVD SiO 2 /Si 3 N 4 double layers electrets with different thicknesses were investigated detailedly in respect of chargeability, storage charge stability in high temperature and reliability in high humidity environment. Samples with different thicknesses of Si 3 N 4 and SiO 2 were prepared on Pyrex 7740 glass substrates and characterized by isothermal and high humidity charge decay. The results of experiment approved that the PECVD SiO 2 /Si 3 N 4 double layers electrets on glass substrate has as good chargeability and charge stability in high temperature and high humidity environment as thermal oxidation or APCVD/LPCVD ones on silicon substrates. The experiment results indicated that a Si 3 N 4 layer no less than 50 nm is necessary for good charge stability in high temperature and a Si 3 N 4 layer thicker than 500 nm decreases the chargeability. Even a 2 nm Si 3 N 4 layer is enough to significantly improve the charge stability in high humidity environment. Thick SiO 2 layer can increase the surface potential of electrets under the same charging condition and its charge stability in high temperature. However, the electrets with high surface potential also exhibit poor uniformity of charge stability in high humidity environment.
基金supported by the National Natural Science Foundation of China(Grant No.51002024)Sichuan Youth Science and Technology Innovation Research Team Funding(Grant No.2011JTD0006)Fundamental Research Funds for the Central Universities(Grant Nos.ZYGX2012J039 and ZYGX2011Z002)
文摘We have successfully employed metal-organic chemical vapor deposition （MOCVD） technique to simultaneously deposit double-sided YBa2Cu3O7-δ （YBCO） films on both sides of YzO3/yttria-stabilized zirconia （YSZ）/CeO2 （YYC） buffered biaxially textured Ni-5 at.% W substrates, which is of great prospect to cut the production cost of YBCO coated conductors. X-ray diffraction analysis revealed that both sides of YBCO film were purely c-axis oriented and highly textured. The co-scan of （005） YBCO and Ф-scan of （103） YBCO yielded full width at half maximum （FWHM） values of 4.9° and 6.6° for one side of double-sided YBCO film, respectively, as well as 4.4° and 6.4° for the other side. The current transportation measurements performed on such double-sided 500 nm-thickness YBCO films showed the self-field critical current density （Jc） at 77 K of 0.6 MA/cm^2 and 1.2 MA/cm^2, respectively. Further research is in the process of exploring new solution to improve the Jc in practice.
