Study of the morphology, aggregation structure and properties ofBombyx mori silk treated by low temperature oxygen plasma showed that slight flutes appeared on the surface of Bombyx mori silk fiber and that its surfac...Study of the morphology, aggregation structure and properties ofBombyx mori silk treated by low temperature oxygen plasma showed that slight flutes appeared on the surface of Bombyx mori silk fiber and that its surface structure changed after plasma treatment. The conformation also changed and crystalline degree decreased. The stannic filling rate of treated fiber was improved. Because of etching, the weight of the fiber decreased but the breaking strength changed little after short-time treatment.展开更多
This research investigates the use of single dielectric barrier discharge(SDBD) actuators for energizing the tip leakage flow to suppress rotating stall inception and extend the stable operating range of a low speed a...This research investigates the use of single dielectric barrier discharge(SDBD) actuators for energizing the tip leakage flow to suppress rotating stall inception and extend the stable operating range of a low speed axial compressor with a single rotor.The jet induced by the plasma actuator adds momentum to the flow in the tip region and has a significant impact on the tip-gap flow.Experiments are carried out on a low speed axial compressor with a single rotor.The static pressure is measured at both the rotor inlet and outlet.The flow coefficient and pressure rise coefficient are calculated.Then the characteristic line is acquired to show the overall performance of the compressor.With unsteady plasma actuation of 18kV and 60W the compressor stability range improvement is realized at rotor speed of 1500 r/min – 2400 r/min.展开更多
文摘Study of the morphology, aggregation structure and properties ofBombyx mori silk treated by low temperature oxygen plasma showed that slight flutes appeared on the surface of Bombyx mori silk fiber and that its surface structure changed after plasma treatment. The conformation also changed and crystalline degree decreased. The stannic filling rate of treated fiber was improved. Because of etching, the weight of the fiber decreased but the breaking strength changed little after short-time treatment.
基金supported by the National Natural Science Foundation of China,project No.50906085International S&T Cooperation Program of China,project No.2013DFR61080
文摘This research investigates the use of single dielectric barrier discharge(SDBD) actuators for energizing the tip leakage flow to suppress rotating stall inception and extend the stable operating range of a low speed axial compressor with a single rotor.The jet induced by the plasma actuator adds momentum to the flow in the tip region and has a significant impact on the tip-gap flow.Experiments are carried out on a low speed axial compressor with a single rotor.The static pressure is measured at both the rotor inlet and outlet.The flow coefficient and pressure rise coefficient are calculated.Then the characteristic line is acquired to show the overall performance of the compressor.With unsteady plasma actuation of 18kV and 60W the compressor stability range improvement is realized at rotor speed of 1500 r/min – 2400 r/min.
