梯形微通道气液分相强化换热实验研究

针对微通道换热器强化沸腾换热,提出分段式梯形换热结构,该结构可实现气泡在表面张力驱动下间断性流向通道两侧,保持中间加热区为液体,实现气液分相流动,进而强化沸腾换热性能。采用无水乙醇为工质,实验研究直肋和梯形结构铜基表面在热流密度为160~320 kW/m2和工质流量为0.4~2.0 g/s时壁温、换热系数等参数变化规律。结果表明:在饱和沸腾区,梯形分相结构可有效实现气液分离,进而降低壁面温度,大幅提高换热系数;如在25 mm位置处,5段结构换热系数比平行结构换热系数提高了60.4%;在单相加热区,换热面积为主要影响因素,直肋结构换热系数略大,但换热系数比饱和沸腾时小一个数量级。平均换热系数分析得到5段结构微通道比平行结构微通道提高了53.8%,可见分段式结构可实现气液分相流动,有效提高沸腾换热的平均换热系数,增强整体换热能力。

基于时变时间序列分析的凝析天然气流量计量

凝析天然气的各相流量是监测、控制气井和气藏动态特性的主要依据.为了研究分相流量,采用一种新的软测量技术,开发出一种在线计量的多相流计量系统。首先对差压信号进行小波模极大值去噪;建立时变AR模型提取相关特征值,研究特征值与气液两相流流量之间的关系,采用RBF网络预报气液分相流量。

LARGE-EDDY SIMULATION OF TWO-PHASE REACTING FLOW IN MODEL COMBUSTOR

The gas-droplet two-phase reacting flow in a model combustor with the V-gutter flame holder is studied by an Eulerian-Lagrangian large-eddy simulation (LES) approach. The k-equation subgrid-scale model is used to simulate the subgrid eddy viscosity, and the eddy-break-up (EBU) combustion subgrid-scale model is used to determine the chemical reaction rate. A two-step turbulent combustion subgrid-scale model is employed for calculating carbon monoxide CO concentration, and the NO subgrid-scale pollutant formation model for the evaluation of the rate of NO formation. The heat flux model is applied to the prediction of radiant heat transfer. The gas phase is solved with the SIMPLE algorithm and a hybrid scheme in the staggered grid system. The liquid phase equations are solved in a Lagrangian frame in reference of the particle-source-in-cell (PSIC) algorithm. From simulation results, the exchange of mass, moment and energy between gas and particle fields for the reacting flow in the afterburner with a V-gutter flame holder can be obtained. By the comparison of experimental and simulation results, profile temperature and pollutant of the outlet are quite in agreement with experimental data. Results show that the LES approach for predicting the two-phase instantaneous reacting flow and pollutant emissions in the afterburner is feasible.

Multi-scale Chaotic Analysis of the Characteristics of Gas-Liquid Two-phase Flow Patterns

Using the high-speed camera the time sequences of the classical flow patterns of horizontal gas-liquid pipe flow are recorded, from which the average gray-scale values of single-frame images are extracted. Thus obtained gray-scale time series is decomposed by the Empirical Mode Decomposition (EMD) method, the various scales of the signals are processed by Hurst exponent method, and then the dual-fractal characteristics are obtained. The scattered bubble and the bubble cluster theories are applied to the evolution analysis of two-phase flow patterns. At the same time the various signals are checked in the chaotic recursion chart by which the two typical characteristics (diagonal average length and Shannon entropy) are obtained. Resulting term of these properties, the dynamic characteristics of gas-liquid two-phase flow patterns are quantitatively analyzed. The results show that the evolution paths of gas-liquid two-phase flow patterns can be well characterized by the integrated analysis on the basis of the gray-scale time series of flowing images from EMD, Hurst exponents and Recurrence Plot (RP). In the middle frequency section (2nd, 3rd, 4th scales), three flow patterns decomposed by the EMD exhibit dual fractal characteristics which represent the dynamic features of bubble cluster, single bubble, slug bubble and scattered bubble. According to the change of diagonal average lengths and recursive Shannon entropy characteristic value, the structure deterministic of the slug flow is better than the other two patterns. After the decomposition by EMD the slug flow and the mist flow in the high frequency section have obvious peaks. Anyway, it is an effective way to understand and characterize the dynamic characteristics of two-phase flow patterns using the multi-scale non-linear analysis method based on image gray-scale fluctuation signals.

A Model for Predicting Holdup and Pressure Drop in Gas- Liquid Stratified Flow

The time-dependent liquid film thickness and pressure drop were measured by using parallel-wire conductance probes and capacitance differential-pressure transducers. Applying the eddy viscosity theory and an appropriate correlation of interfacial sear stress,a new two-dimensional separated model of holdup and pressure drop of turbulent/turbulent gas-liquid stratified flow was presented. Prediction results agreed well with experimental data.

Kinetic Mass Transfer Between Non-aqueous Phase Liquid and Gas During Soil Vapor Extraction

The mass transfer between non-aqueous phase liquid(NAPL) phase and soil gas phase in soil vapor extraction(SVE) process has been investigated by one-dimensional venting experiments. During quasi-steady volatilization of three single-component NAPLs in a sandy soil, constant initial lumped mass transfer coefficient (λgN,0) canbe obtained if the relative saturation (ξ) between NAPL phase and gas phase is higher than a critical value (ξc), andthe lumped mass transfer coefficient decreases with ξ when ξ＜ξc. It is also shown that the lumped mass transfercoefficient can be increased by blending porous micro-particles into the sandy soil because of the increasing of theinterfacial area.

Reconstructing bubble profiles from gas-liquid two-phase flow data using agglomerative hierarchical clustering method

The knowledge of bubble profiles in gas-liquid two-phase flows is crucial for analyzing the kinetic processes such as heat and mass transfer, and this knowledge is contained in field data obtained by surface-resolved computational fluid dynamics (CFD) simulations. To obtain this information, an efficient bubble profile reconstruction method based on an improved agglomerative hierarchical clustering (AHC) algorithm is proposed in this paper. The reconstruction method is featured by the implementations of a binary space division preprocessing, which aims to reduce the computational complexity, an adaptive linkage criterion, which guarantees the applicability of the AHC algorithm when dealing with datasets involving either non-uniform or distorted grids, and a stepwise execution strategy, which enables the separation of attached bubbles. To illustrate and verify this method, it was applied to dealing with 3 datasets, 2 of them with pre-specified spherical bubbles and the other obtained by a surface-resolved CFD simulation. Application results indicate that the proposed method is effective even when the data include some non-uniform and distortion.

Velocity Slip and Interfacial Momentum Transfer in the Transient Section of Supersonic Gas-Droplet Two-Phase Flows

Modelling and simulations are conducted on velocity slip and interfacial momentum transfer for supersonic two-pha.se (gas-droplet) flow in the transient section inside and outside a Laval jet(LJ). The initial velocity slip between gas and droplets causes an interfacial momentum transfer flux as high as (2.0-5.0) x 104 Pa. The relaxation time corresponding to this transient process is in the range of 0.015-0.090ms for the two-phase flow formed inside the LJ and less than 0.5ms outside the LJ. It demonstrates the unique performance of this system for application to fast chemical reactions using electrically active media with a lifetime in the order of 1 ms. Through the simulations of the transient processes with initial Mach number Mg from 2.783 to 4.194 at different axial positions inside the LJ, it is found that Mg has the strongest effect on the process. The momentum flux increases as the Mach number decreases. Due to compression by the shock wave at the end of the LJ, the flow pattern becomes two dimensional and viscous outside the LJ. Laser Doppler velocirneter (LDV) measurements of droplet velocities outside the LJ are in reasonably good agreement with the results of the simulation.

A Model of Turbulent-Laminar Gas-Liquid Stratified Flow

The time-dependent liquid film thickness and pressure drop are measured by using parallel-wire conduc tance probes and capacitance differential-pressure transducer. A mathematical model with iterative procedure to calculate holdup and pressure drop in horizontal and inclined gas-liquid stratified flow is developed. The predictions agree well with over a hundred experimental data in 0.024 and 0.04 m diameter pipelines.

Determination of the gas compositions for direct coal liquefaction by gas chromatography

Via multi-dimensional gas chromatography, configured with parallel dual-channel, double detectors, valves switching and back flushing, rapid analysis of the gas compositions consisting of C1-C5 hydrocarbons and permanent gases, such as CO2, H2S, H2, and CO, for direct coal liquefaction has been realized. With four packed chromatographic columns, which are Hayesep-Q pre-column, Hayesep-Q column, molecular sieve 5A column and one PLOT A1203 S capillary column, the gas compositions for direct coal liquefaction are analyzed qualitatively and quantitatively by the external standard method. The determination method has such advantages as excellent separation, simple operation, rapid analysis and accurate results.

Novel Gas-assisted Three-liquid-phase Extraction System for Simultaneous Separation and Concentration of Anthraquinones in Herbal Extract

Gas-assisted three-liquid-phase extraction(GATE), which has the advantages of both three-liquid-phase extraction and solvent sublation, is a novel separation technique for separation and concentration of two organic compounds into different phases in one step. This highly effective and economically applicable method has been developed for separating emodin and rhein from herbal extract. In a GATE system composed of butyl acetate/PEG4000/ammonium sulfate aqueous solution, influence of various parameters including gas flow rate, flotation time, salt concentration, initial volume of PEG and butyl acetate was investigated. Within 50 min of 30 ml·min-1nitrogen flow, removal ratio of emodin and rhein from aqueous phase could be over 99% and 97%, respectively.Mass fraction of emodin in the BA phase and rhein in the PEG phase could reach 97% and 95%, respectively. It is demonstrated that gas bubbling is effective for partitioning of emodin and rhein into butyl acetate and PEG phase respectively, and dispersed PEG and butyl acetate could be captured from the aqueous solution. Experimental results show that GATE could be an effective and economical technology for concentration and separation of co-existed products in medicinal plants.

Measurment of gas-liquid two-phase slug flow with a Venturi meter based on blind source separation

We propose a novel flow measurement method for gas–liquid two-phase slug flow by using the blind source separation technique. The flow measurement model is established based on the fluctuation characteristics of differential pressure(DP) signals measured from a Venturi meter. It is demonstrated that DP signals of two-phase flow are a linear mixture of DP signals of single phase fluids. The measurement model is a combination of throttle relationship and blind source separation model. In addition, we estimate the mixture matrix using the independent component analysis(ICA) technique. The mixture matrix could be described using the variances of two DP signals acquired from two Venturi meters. The validity of the proposed model was tested in the gas–liquid twophase flow loop facility. Experimental results showed that for most slug flow the relative error is within 10%.We also find that the mixture matrix is beneficial to investigate the flow mechanism of gas–liquid two-phase flow.

Flow Rate of He II Liquid-Vapor Phase Separator

Experimental results are presented for superfluid (He II) flow through porous plug liquid-vapor phase separators. Tests have been performed on seven porous plugs with different thicknesses or different permeabilities. The temperature was measured from 1.5K to 1.9K. Two flow regions were observed in small and large pressure and temperature differences regions respectively. The experimental data are compared with theoretical predictions. The performance and applicability of the basic theory are discussed. Hysteresis of the flow rate is also observed and discussed.

Numerical Simulation and Experiment Analyses for the Gas-liquid Two-phase Vortex Pump

Based on the gas-liquid two-phase mixture transportation test, the k-c-A; turbulence model was applied to simulate the two-phase turbulent flow in a vortex pump. By comparing the simulation and experiment results, inner flow features were revealed. The bubbles in the channel distribute mainly at the pressure side of the blades, and the aggregation degree of the bubbles is enhanced with an increase in inlet gas volume fraction. Experimental results indicate that the influence of the gas phase on vortex pump performance is small when the gas volume fraction is less than 10%. When the gas volume fraction contiuuously increases to 15%, the characteristic curves abruptly drop due to the gas blocking phenomenon.