大尺度双体船机舱通风系统的数值模拟分析和优化设计

大尺度双体船具有型深和船宽大、辐射噪音小、重量和尺寸要求严格等技术特点,导致其机舱通风系统送风管路过长、回风阻力高、管系布置困难,这极易造成舱内局部风速严重不均、重点区域温度过高以及舱内压力过大等现象。本文以世界最大的6 000吨级双体船的设计为例,利用CFD技术对其机舱通风系统进行数值模拟分析,发现其气相组织在风速、温度和压力等方面存在诸多问题;进一步提出具体改造方案,即增加主甲板送风支路、增加底舱抽风管系和甲板通风开孔,并选取优化前后的典型截面进行气相组织对比分析,验证了优化方案的正确性。该优化方案满足海船规范要求,且成本低、施工方便,对于大尺度双体船通风系统的设计具有一定的参考价值。

Microstructure and mechanical properties of AZ31B magnesium alloy gas metal arc weld

Wrought magnesium alloy sheets were butt welded with gas metal arc welding process. Pores in the weld were investigated under different welding parameters, the causes of pore formation were systematically disposed, and the effects of porosity on the microstructure and mechanical properties of the joint were analyzed. The microstructure examination shows that the pores mainly appear close to the top or bottom part of the weld, and could connect to each other and lead to the formation of cracks in the welds. However, the pores can be controlled with proper welding parameters. The tensile testing results reveal that the average joint strength is close to or higher than that of the base metal. The microhardness in the weld can be even higher than that in the base metal due to the second ohase strengthening of β-Mg17（A1, Zn）12 formed in the weld.

Clinical implication of 14-3-3 epsilon expression in gastric cancer

AIM:To evaluate for the first time the protein and mRNA expression of 14-3-3εin gastric carcinogenesis.METHODS:14-3-3εprotein expression was determined by western blotting,and mRNA expression was examined by real-time quantitative RT-PCR in gastric tumors and their matched non-neoplastic gastric tissue samples.RESULTS:Authors observed a significant reduction of 14-3-3εprotein expression in gastric cancer(GC)samples compared to their matched non-neoplastic tissue.Reduced levels of 14-3-3εwere also associated with diffuse-type GC and early-onset of this pathology.Our data suggest that reduced 14-3-3εmay have a role in gastric carcinogenesis process.CONCLUSION:Our results reveal that the reduced 14-3-3εexpression in GC and investigation of 14-3-3ε interaction partners may help to elucidate the carcino-genesis process.

Potential therapeutic significance of increased expression of aryl hydrocarbon receptor in human gastric cancer

AIM： To determine the functional significance of aryl hydrocarbon receptor （AhR） in gastric carcinogenesis, and to explore the possible role of AhR in gastric cancer （GC） treatment. METHODS： RT-PCR, real-time PCR, and Western blotting were performed to detect AhR expression in 39 GC tissues and five GC cell lines. AhR protein was detected by immunohistochemistry （IHC） in 290 samples： 30 chronic superficial gastritis （CSG）, 30 chronic atrophic gastritis （CAG）, 30 intestinal metapiasia （IN）, 30 atypical hyperplasia （AH）, and 70 GC. The AhR agonist tetrachlorodibenzo-para-dioxin （TCDD） was used to treat AGS cells. MTr assay and flow cytometric analysis were performed to measure the viability, cell cycle and apoptosis of AGS cells.RESULTS： AhR expression was significantly increased in GC tissues and GC cell lines. IHC results indicated that the levels of AhR expression gradually increased, with the lowest levels in CSG, followed by CAG, IM, AH and GC. AhR expression and nuclear translocation were significantly higher in GC than in precancerous tissues. TCDD inhibited proliferation of AGS cells via induction of growth arrest at the G1-S phase. CONCLUSION： AhR plays an important role in gastric carcinogenesis. AhR may be a potential therapeutic target for GC treatment.

Diethylstilbestrol in Fish Tissue Determined Through Subcritical Fluid Extraction and with GC-MS

As the key point in sex hormone analysis, sample pre-treatment technology has attracted scientists' attention all over the world, and the development trend of sample preparation forwarded to faster and more efficient technologies. Taking economic and environmental concerns into account, subcritical fluid extraction as a faster and more efficient method has stood out as a sample pre-treatment technology. This new extraction technology can overcome the shortcomings of supercritical fluid and achieve higher extraction efficiency at relatively low pressures and temperatures. In this experiment, a simple, sensitive and efficient method has been developed for the determination of diethylstilbestrol(DES) in fish tissue using subcritical 1,1,1,2-tetrafluoroethane(R134a) extraction in combination with gas chromatography-mass spectrometry(GC-MS). After extraction, freezing-lipid filtration was utilized to remove fatty co-extract. Further purification steps were performed with C_(18) and NH_2 solid phase extraction(SPE). Finally, the analyte was derived by heptafluorobutyric anhydride(HFBA), followed by GC-MS analysis. Response surface methodology(RSM) was employed to optimizing the extraction condition, and the optimized was as follows: extraction pressure, 4.3 MPa; extraction temperature, 26℃; amount of co-solvent volume, 4.7 m L. Under this condition, at a spiked level of 1, 5, 10 μg kg^(-1), the mean recovery of DES was more than 90% with relative standard deviations(RSDs) less than 10%. Finally, the developed method has been successfully used to analyzing the real samples.

Effect of sintering atmosphere on composition and properties of NiFe_2O_4 ceramic

Ni Fe2O4 ceramics were prepared in different sintering atmospheres. The phase compositions, microstructures and mechanical properties were studied. The results show that the stoichiometric compound Ni Fe2O4 cannot be obtained in vacuum or atmospheres with oxygen contents of 2×10-5, 2×10-4 and 2×10-3, respectively. All the samples sintered in above-mentioned atmospheres contain phases of Ni Fe2O4 and Ni O. With increasing oxygen content, Ni Fe2O4 content in the ceramic increases, while Ni O content appears a contrary trend. In vacuum, Ni Fe2O4 ceramic has average grain size of 3.94 μm, and bending strength of85.12 MPa. The changes of the phase composition and mechanical properties of Ni Fe2O4 based cermets are mainly caused by the alteration of their properties of Ni Fe2O4 ceramic.