期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
气相色谱/质谱联用测定鞋用胶溶剂 被引量:4
1
作者 柯宗枝 余雪林 +3 位作者 王世栋 谢星云 林兴 王志勇 《上海预防医学》 CAS 2004年第1期32-33,共2页
关键词 相色变/质谱联用 鞋用胶溶剂 职业危害 劳动卫生
下载PDF
禽肉中氯羟吡啶残留量的GC/MS测定法 被引量:14
2
作者 张睿 段宏安 《中国兽医杂志》 CAS 北大核心 2002年第5期39-41,共3页
关键词 禽肉 氯羟吡啶残留量 GC/MS 测定 气谱/质谱联用法
下载PDF
Diethylstilbestrol in Fish Tissue Determined Through Subcritical Fluid Extraction and with GC-MS 被引量:1
3
作者 QIAO Qinghui SHI Nianrong +3 位作者 FENG Xiaomei LU Jie HAN Yuqian XUE Changhu 《Journal of Ocean University of China》 SCIE CAS 2016年第3期489-494,共6页
As the key point in sex hormone analysis, sample pre-treatment technology has attracted scientists' attention all over the world, and the development trend of sample preparation forwarded to faster and more effici... As the key point in sex hormone analysis, sample pre-treatment technology has attracted scientists' attention all over the world, and the development trend of sample preparation forwarded to faster and more efficient technologies. Taking economic and environmental concerns into account, subcritical fluid extraction as a faster and more efficient method has stood out as a sample pre-treatment technology. This new extraction technology can overcome the shortcomings of supercritical fluid and achieve higher extraction efficiency at relatively low pressures and temperatures. In this experiment, a simple, sensitive and efficient method has been developed for the determination of diethylstilbestrol(DES) in fish tissue using subcritical 1,1,1,2-tetrafluoroethane(R134a) extraction in combination with gas chromatography-mass spectrometry(GC-MS). After extraction, freezing-lipid filtration was utilized to remove fatty co-extract. Further purification steps were performed with C_(18) and NH_2 solid phase extraction(SPE). Finally, the analyte was derived by heptafluorobutyric anhydride(HFBA), followed by GC-MS analysis. Response surface methodology(RSM) was employed to optimizing the extraction condition, and the optimized was as follows: extraction pressure, 4.3 MPa; extraction temperature, 26℃; amount of co-solvent volume, 4.7 m L. Under this condition, at a spiked level of 1, 5, 10 μg kg^(-1), the mean recovery of DES was more than 90% with relative standard deviations(RSDs) less than 10%. Finally, the developed method has been successfully used to analyzing the real samples. 展开更多
关键词 subcritical R134a extraction DIETHYLSTILBESTROL GC-MS determination fish tissue
下载PDF
Assessment of Triazine Herbicides in Soil by Microwave-assisted Extraction Followed by Gas Chromatography Coupled to Mass Spectrometry Detection 被引量:1
4
作者 Darlan Ferreira Silva Maria Diva Landgraf Maria Olimpia Oliveira Rezende 《Journal of Chemistry and Chemical Engineering》 2017年第1期1-8,共8页
An alternative and fast method for the analysis of a mixture of nine triazines herbicides in soil is presented. The method is based on MAE (microwave-assisted extraction) of herbicides using ethyl acetate as extract... An alternative and fast method for the analysis of a mixture of nine triazines herbicides in soil is presented. The method is based on MAE (microwave-assisted extraction) of herbicides using ethyl acetate as extractant. The economy in the use of solvents coupled with the decrease in extraction time and lower power consumption make MAE a technique that meets the principles of green chemistry. MAE operational parameters, extraction time, mass of the sample and extraction temperature, were optimized by RSM (response surface methodology). Determination of analytes was completed using gas chromatograph coupled to mass spectrometry detection. The selected triazines could be efficiently extracted by the solvent at 80 ℃ for 10 min, with 80% output of maximum power. When the optimized method was applied to analysis samples, the recoveries of analytes ranged from 81.8 to 106.0% and relative standard deviations were lower than 8.41%. The method is stable and reasonable, which can be used for the determination of ninetriazine herbicides residues in soil. 展开更多
关键词 Factorial design response surface methodology microwave-assisted extraction HERBICIDES triazines.
下载PDF
Enthalpy of phase transition of isonicotinic acid
5
作者 Dongfang Zhao Guanghui Liu +1 位作者 Jian Sun Lisheng Wang 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2017年第7期971-975,共5页
In this work, the group contribution method of Chickos et al. was applied to estimate the fusion enthalpy of isonicotinic acid, and the obtained result(29.2 k J·mol^(-1)) showed a large difference with the value(... In this work, the group contribution method of Chickos et al. was applied to estimate the fusion enthalpy of isonicotinic acid, and the obtained result(29.2 k J·mol^(-1)) showed a large difference with the value(135 k J·mol^(-1)) as reported from literatures and as determined by differential scanning calorimetry(DSC). The results of DSC/TG measurement showed that the phase transition of isonicotinic acid from 187.27 °C to277.47 °C underwent a sublimation process, with a sublimation enthalpy of 128.03 k J·mol^(-1). An efficient analytical technique combining pyrolysis and gas chromatography/mass spectrometry(Py-GC/MS) was used to prove this conclusion. 展开更多
关键词 lsonicotinic acid Enthalpy of fusion Group contribution method Enthalpy of sublimation Py-GC/MS
下载PDF
三种新型工艺加热卷烟再造烟叶的对比 被引量:1
6
作者 李奕蓉 汤丹瑜 +4 位作者 刘春波 唐石云 李振杰 蒋薇 杨继 《烟草科技》 CAS CSCD 北大核心 2023年第6期59-68,共10页
为分析新型制造工艺的加热卷烟基片,采用扫描电子显微镜、热重和热重-傅里叶红外光谱-气相色谱/质谱(TG-FTIR-GC/MS)联用技术比较了加热卷烟再造烟叶的结构以及热行为。结果表明:(1)3种新型工艺加热卷烟再造烟叶结构紧密程度为新型辊压... 为分析新型制造工艺的加热卷烟基片,采用扫描电子显微镜、热重和热重-傅里叶红外光谱-气相色谱/质谱(TG-FTIR-GC/MS)联用技术比较了加热卷烟再造烟叶的结构以及热行为。结果表明:(1)3种新型工艺加热卷烟再造烟叶结构紧密程度为新型辊压法>新型涂布造纸法>造纸稠浆复合法。(2)新型辊压法、新型涂布造纸法和造纸稠浆复合法再造烟叶均具有4个失重阶段,起始分解温度分别为43.12、143.69和43.44℃,最大失重分别发生在新型辊压法和新型涂布造纸法的第二失重阶段以及造纸稠浆复合法再造烟叶的第三失重阶段。(3)不同再造烟叶分别裂解出少量特征香味成分,例如,新型辊压法的异丁香酚、新型涂布造纸法的香兰素和造纸稠浆复合法的2,3-二氢-3,5-二羟基-6-甲基-4H-吡喃-4-酮(DDMP)。3种新型工艺再造烟叶热解过程的主要逸出物为甘油、烟碱和少量特征香味成分,且3种再造烟叶均适合作为烟芯材料应用于加热卷烟。 展开更多
关键词 加热卷烟 再造烟叶 新型辊压 新型涂布造纸 造纸稠浆复合 热重-傅里叶红外光-相色/质谱联用
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部