期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
钢中氧、氮含量测定能力验证分析
1
作者 刘艳 姚佳人 《机械工程与自动化》 2024年第2期106-107,113,共3页
为了解国内各实验室对钢中氧、氮含量测定的能力水平,组织了本次钢中氧、氮含量的测定能力验证活动。采用单因子方差分析法对能力验证样品进行均匀性检验,用传统统计技术处理,采用Grubbs方法剔除异常值后,获得指定值和能力评定标准差,用... 为了解国内各实验室对钢中氧、氮含量测定的能力水平,组织了本次钢中氧、氮含量的测定能力验证活动。采用单因子方差分析法对能力验证样品进行均匀性检验,用传统统计技术处理,采用Grubbs方法剔除异常值后,获得指定值和能力评定标准差,用z比分数判定各实验室的检测结果。结果显示:全部结果满意的实验室有8家,占参加实验室总数的72.73%。绝大多数实验室具备满意的检测能力和水平。 展开更多
关键词 能力验证 氧、氮含量
下载PDF
20CrMnTiH齿轮钢氧氮分析 被引量:1
2
作者 黄星武 《新疆钢铁》 2017年第2期6-9,共4页
文章结合炼钢各工序的实际控制,对20CrMnTiH齿轮钢精炼、连铸工艺环节取样,分析了钢中氧、氮含量。找出炼钢各个工序氧、氮含量变化规律,明确炼钢各工艺环节降低氧、氮含量应承担的任务,提出降低氧、氮含量的措施。通过改进炼钢工艺,达... 文章结合炼钢各工序的实际控制,对20CrMnTiH齿轮钢精炼、连铸工艺环节取样,分析了钢中氧、氮含量。找出炼钢各个工序氧、氮含量变化规律,明确炼钢各工艺环节降低氧、氮含量应承担的任务,提出降低氧、氮含量的措施。通过改进炼钢工艺,达到提高质量的目的。 展开更多
关键词 氧、氮含量 炼钢工艺 低碳合金钢
下载PDF
EFFECT OF OXYGEN CONTENT ON NITROGEN ABSORPTIVE MECHANISM IN WELD FOR FLUX-CORED WIRE 被引量:3
3
作者 冯灵芝 张智 张文钺 《Transactions of Tianjin University》 EI CAS 2001年第1期48-51,共4页
By measuring the content of oxygen and nitrogen in welds of six kinds of self-shielded flux-cored wires,the effect of oxygen on nitrogen content in weld is studied and the different absorptive mechanisms of nitrogen a... By measuring the content of oxygen and nitrogen in welds of six kinds of self-shielded flux-cored wires,the effect of oxygen on nitrogen content in weld is studied and the different absorptive mechanisms of nitrogen at a low oxygen level([O] lower than 0.02%) and a high oxygen level ([O] higher than 0.03%) have been discovered.The results indicate that the content of nitrogen in weld can be made lowest by modifying the composition of flux and controlling the content of oxygen to the range of 0.02%~0.03%. 展开更多
关键词 self-shielded flux-cored wire oxygen content nitrogen content
全文增补中
Q195矩形坯中显微夹杂物行为
4
作者 王燕 朱立光 徐立山 《华北理工大学学报(自然科学版)》 CAS 2018年第1期8-13,43,共7页
某钢厂为适应市场需求,对Q195钢的生产工艺进行了简化,现为120t转炉→吹氩→连铸。现场对不同炉次和不同工序进行取样,采用氧、氮测试和示踪法以及金相实验等手段,对钢中的氧、氮含量和夹杂物的形貌、尺寸、数量以及分布等进行了系统分... 某钢厂为适应市场需求,对Q195钢的生产工艺进行了简化,现为120t转炉→吹氩→连铸。现场对不同炉次和不同工序进行取样,采用氧、氮测试和示踪法以及金相实验等手段,对钢中的氧、氮含量和夹杂物的形貌、尺寸、数量以及分布等进行了系统分析。试验结果显示:试样中氧、氮含量较高,尾坯中T[O]含量最高,可达到254ppm;显微夹杂物中主要以Al_2O_3-SiO_2-MnO类夹杂物存在,尺寸范围为5~15μm,约占38%,且各工序与各炉次中均含有示踪元素La、Ce。因此,钢液在浇注过程中加强保护浇注,减少钢液的二次氧化。与此同时,优化中间包结构和浇注过程的稳定操作是十分必要的。 展开更多
关键词 氧、氮含量 示踪法 显微夹杂物
下载PDF
Effect of Silicon and Nitrogen Nutrition on Pest and Disease Intensity in Rice 被引量:1
5
作者 Kasthuri Rajamani Bhupal Raj Gunti +1 位作者 Shashi Vemuri Ramesh Bellamkonda 《Journal of Agricultural Science and Technology(A)》 2013年第7期568-574,共7页
Nutrition management is the most important for high yield production but it may affect the response of rice plants to pest and diseases due to the change of microclimate under rice plant canopy. The knowledge of nutri... Nutrition management is the most important for high yield production but it may affect the response of rice plants to pest and diseases due to the change of microclimate under rice plant canopy. The knowledge of nutrition management and its relation with pest and diseases are basis for setting up a high yield production system. Most of the pest and disease control procedures used by farmers can be considered as soil fertility management and these nutrition practices can have impact on the physiological susceptibility of crop plants to pest and diseases by affecting the plant resistance. Silicon content of plants is particularly effective against pest and diseases in rice and certain rice genotypes are more efficient accumulators of silicon, thus making them more resistant. In the absence of natural heritable resistance in rice varieties, resistance could be induced by altemate strategies to suppress certain pest and pathogens. Hence experiments were carried out in two stages during kharif 2010 and 2011 to assess the concentration of silicon in the index leaves of rice plant utilizing 133 varieties in four locations. The silica content of promising varieties ranged from 1.50% to 3.20%, 1.60% to 3.15%, 1.49% to 3.20% and 1.55% to 3.06% with a mean values of 2.50%, 2.48%, 2.51% and 2.43% at Jagtial, Warangal, Rajendranagar and Rudrur centres of Telangana region and not much variation in mean silica content in index leaves at different places. The overall yield from four locations ranged from 2,653 kg/ha to 6,860 kg/ha with a mean of 5,624 kg/ha. The yields recorded at Jagtial, Warangal, Rajendranagar and Rudrur centres ranged from 2,886 to 7,198, 2,653 to 6,831, 2,653 to 6,860 and 4,399 to 5,950 kg/ha, respectively. The lowest mean yield 5,069 kg/ha was noticed at Rudrur and the highest yield 5,940 kg/ha was found at Warangal. The variations in yields might be due to genotypic variations and also due to variations in climatic conditions of different locations. 展开更多
关键词 Nutrition management conventional rice silicon rice genotypes pest and diseases.
下载PDF
Effects of Different Acupuncture Stimulations on NO Content in Acupoint Areas
6
作者 贲卉 荣培晶 +2 位作者 李亮 高欣妍 何伟 《Journal of Traditional Chinese Medicine》 SCIE CAS CSCD 2010年第1期25-29,共5页
Objective:To study the effects of different acupuncture stimulation on nitric oxide(NO) content in acupoint areas.Methods:The experiment was performed in 47 healthy volunteers providing informed consents.Both males an... Objective:To study the effects of different acupuncture stimulation on nitric oxide(NO) content in acupoint areas.Methods:The experiment was performed in 47 healthy volunteers providing informed consents.Both males and females were included in each group:11 cases in electro-acupuncture group,13 cases in manual-acupuncture group,16 cases in warm-moxibustion group,and 7 cases in control group.Stimulations were given at Jianshi(PC 5) of the Pericardium Meridian and Chengshan(BL 57) of the Bladder Meridian with manual-acupuncture,electro-acupuncture and warm-moxibustion respectively.NO was collected from Ximen(PC 4) and Chengjin(BL 56) areas on the ipsilateral meridians,and the content was detected.Results:The content of NO in the warm-moxibustion group was higher than that in the electro-acupuncture group,the content in electro-acupuncture group was higher than that in the manual acupuncture group(P<0.05) . Conclusion:All the three stimulations can raise NO levels on acupoint areas significantly,and the effect moxibustion is superior to that of electro-acupuncture and manual acupuncture. 展开更多
关键词 manual acupuncture ELECTRO-ACUPUNCTURE warm-moxibustion nitric oxide
原文传递
Effect of CO_2 enrichment on the glucosinolate contents under different nitrogen levels in bolting stem of Chinese kale (Brassica alboglabra L.) 被引量:7
7
作者 Gui-xiao LA Ping FAN +2 位作者 Yi-bo TENG Ya-juan LI Xian-yong LIN 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2009年第6期454-464,共11页
The effects of CO2 enrichment on the growth and glueosinolate (GS) concentrations in the bolting stem of Chinese kale (Brassica alboglabra L.) treated with three nitrogen (N) concentrations (5, 10, and 20 mmol/... The effects of CO2 enrichment on the growth and glueosinolate (GS) concentrations in the bolting stem of Chinese kale (Brassica alboglabra L.) treated with three nitrogen (N) concentrations (5, 10, and 20 mmol/L) were investigated. Height, stem thickness, and dry weights of the total aerial parts, bolting stems, and roots, as well as the root to shoot ratio, significantly increased as CO2 concentration was elevated from 350 to 800 μl/L at each N concentration. In the edible part of the bolting stem, 11 individual GSs were identified, including 7 aliphatic and 4 indolyl GSs. GS concentration was affected by the elevated CO2 concentration, N concentration, and CO2×N interaction. At 5 and 10 mmol N/L, the concentrations of aliphatic GSs and total GSs significantly increased, whereas those ofindolyl GSs were not affected, by elevated atmospheric CO2. However, at 20 mmol N/L, elevated CO2 had no significant effects on the concentrations of total GSs and total indolyl GSs, but the concentrations of total aliphatic GSs significantly increased. Moreover, the bolting stem carbon (C) content increased, whereas the N and sulfur (S) contents decreased under elevated CO2 concentration in the three N treatments, resulting in changes in the C/N and N/S ratios. Also the C/N ratio is not a reliable predictor of change of GS concentration, while the changes in N and S contents and the N/S ratio at the elevated CO2 concentration may influence the GS concentration in Chinese kale bolting stems. The results demonstrate that high nitrogen supply is beneficial for the growth of Chinese kale, but not for the GS concentration in bolting stems, under elevated CO2 condition. 展开更多
关键词 Carbon dioxide (CO2) Brassica alboglabra Nitrogen (N) Growth Bolting stem Aliphatic glucosinolates Indolyl glucosinolates Carbon/nitrogen ratio (C/N) Nitrogen/sulfur ratio (N/S)
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部