From June 2008 to August 2013,approximately 67 kt of CO_(2) was injected into a deep saline formation at the Ketzin pilot CO_(2) storage site.During injection,3D seismic surveys have been performed to monitor the migr...From June 2008 to August 2013,approximately 67 kt of CO_(2) was injected into a deep saline formation at the Ketzin pilot CO_(2) storage site.During injection,3D seismic surveys have been performed to monitor the migration of sequestered CO_(2).Seismic monitoring results are limited by the acquisition and signal-to-noise ratio of the acquired data.The multiphysical reservoir simulation provides information regarding the CO_(2) fluid behavior,and the approximated model should be calibrated with the monitoring results.In this work,property models are delivered from the multiphysical model during 3D repeated seismic surveys.The simulated seismic data based on the models are compared with the real data,and the results validate the effectiveness of the multiphysical inversion method.Time-lapse analysis shows the trend of CO_(2) migration during and after injection.展开更多
The non-isothermal oxidation behavior and oxide scale microstructure of Ti-Cr alloy （0≤w（Cr）≤25%） were studied from room temperature to 1723 K by thermogravimetric analysis （TGA）, X-ray diffraction （XRD） and...The non-isothermal oxidation behavior and oxide scale microstructure of Ti-Cr alloy （0≤w（Cr）≤25%） were studied from room temperature to 1723 K by thermogravimetric analysis （TGA）, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The influencing mechanism of chromium on the oxidation resistance of Ti-Cr alloys was discussed. The results show that the oxidation resistance of the alloys decreases with Cr below a critical chromium content wC and increases above wC; above 1000 K, the oxidation kinetics obeys parabolic rule and titanium dominates the oxidation process; after oxidation, the oxygen-diffusing layer is present in the alloy matrix, the oxide scale is mainly composed of rutile whose internal layer is rich in chromium, and chromium oxides separated out from TiO2 near the alloy-oxide interface improve the oxidation resistance. Ignition of metals and alloys is a fast non-isothermal oxidation process and the oxidation mechanism of Ti-Cr alloys during ignition is predicted.展开更多
The bulk electronic structure of kaolinite (001) plane was studied with quantum mechanical calculations. The CASTEP parameterization of ultrasoft pseudopotentials without core corrections was used to optimize the stru...The bulk electronic structure of kaolinite (001) plane was studied with quantum mechanical calculations. The CASTEP parameterization of ultrasoft pseudopotentials without core corrections was used to optimize the structure of kaolinite bulk and slab models. The results show that Fermi energy of kaolinite (001) plane is 3.05 eV, and the band gap is 4.52 eV. The partial density of states (PDOS) of kaolinite (001) plane indicates that Al-O and Si-O bonds on the mineral surface are highly polar. The oxygen atoms of hydroxyl groups in surface layer are capable of forming hydrogen bond with the head group of cationic collectors. The properties of dodecylamine (DDA) cation were also calculated by density function theory (DFT) method at B3LYP/6-31G (d) level for illuminating the flotation processes of kaolinite. Besides the electrostatic attraction, the mechanism between kaolinite and DDA is found to be hydrogen bonds under acidic condition.展开更多
Anthocyanin is a water soluble natural pigmen, which could be extracted from Red Rose. Color is an important factor to determine the quality of foods, so that the pigments isolation must be selected type of solvent fo...Anthocyanin is a water soluble natural pigmen, which could be extracted from Red Rose. Color is an important factor to determine the quality of foods, so that the pigments isolation must be selected type of solvent for extraction process. Besides functioning as dyes, anthocyanins have a role as a good antioxidant, so it can be used to protect the fat content of fermented milk such as yoghurt. This experiment was to find out the effect of different solvent type on extraction pigment （aquadest： sitrat acid/lactic acid/sulfate acid/chloride acid） and to determine the effect of the addition of anthocyanins in protecting the fat content of yogurt on several levels addition. The research result showed that anthocyanin＇s pigment of red rose from petal flower＇s could be effective solvent extracted using lactic acid 0.02 M and increased fat stability of yoghurt. The anthocyanin pigment showed with HPLC analysis that pigment resulted TLC analysis at rite time 13.10 （as Cyanidin glucoside） and 22.61 （as Malvidin glucoside）. Yoghurt that given anthocyanin pigment has proven that fat content can be maintained its 86.7% （fat content with 2% pigment as such as 0.117% and without pigment 0.087%） after being stored for 6 days at cold and room temperature.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.42025403)the Youth Innovation Promotion Association,Chinese Academy of Sciences(Grant No.2023074).
文摘From June 2008 to August 2013,approximately 67 kt of CO_(2) was injected into a deep saline formation at the Ketzin pilot CO_(2) storage site.During injection,3D seismic surveys have been performed to monitor the migration of sequestered CO_(2).Seismic monitoring results are limited by the acquisition and signal-to-noise ratio of the acquired data.The multiphysical reservoir simulation provides information regarding the CO_(2) fluid behavior,and the approximated model should be calibrated with the monitoring results.In this work,property models are delivered from the multiphysical model during 3D repeated seismic surveys.The simulated seismic data based on the models are compared with the real data,and the results validate the effectiveness of the multiphysical inversion method.Time-lapse analysis shows the trend of CO_(2) migration during and after injection.
文摘The non-isothermal oxidation behavior and oxide scale microstructure of Ti-Cr alloy （0≤w（Cr）≤25%） were studied from room temperature to 1723 K by thermogravimetric analysis （TGA）, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The influencing mechanism of chromium on the oxidation resistance of Ti-Cr alloys was discussed. The results show that the oxidation resistance of the alloys decreases with Cr below a critical chromium content wC and increases above wC; above 1000 K, the oxidation kinetics obeys parabolic rule and titanium dominates the oxidation process; after oxidation, the oxygen-diffusing layer is present in the alloy matrix, the oxide scale is mainly composed of rutile whose internal layer is rich in chromium, and chromium oxides separated out from TiO2 near the alloy-oxide interface improve the oxidation resistance. Ignition of metals and alloys is a fast non-isothermal oxidation process and the oxidation mechanism of Ti-Cr alloys during ignition is predicted.
基金Project(2005CB623701) supported by the Major State Basic Research and Development Program of ChinaProject(50874118) supported by the National Nature Science Foundation of ChinaProject(2007B52) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of China
文摘The bulk electronic structure of kaolinite (001) plane was studied with quantum mechanical calculations. The CASTEP parameterization of ultrasoft pseudopotentials without core corrections was used to optimize the structure of kaolinite bulk and slab models. The results show that Fermi energy of kaolinite (001) plane is 3.05 eV, and the band gap is 4.52 eV. The partial density of states (PDOS) of kaolinite (001) plane indicates that Al-O and Si-O bonds on the mineral surface are highly polar. The oxygen atoms of hydroxyl groups in surface layer are capable of forming hydrogen bond with the head group of cationic collectors. The properties of dodecylamine (DDA) cation were also calculated by density function theory (DFT) method at B3LYP/6-31G (d) level for illuminating the flotation processes of kaolinite. Besides the electrostatic attraction, the mechanism between kaolinite and DDA is found to be hydrogen bonds under acidic condition.
文摘Anthocyanin is a water soluble natural pigmen, which could be extracted from Red Rose. Color is an important factor to determine the quality of foods, so that the pigments isolation must be selected type of solvent for extraction process. Besides functioning as dyes, anthocyanins have a role as a good antioxidant, so it can be used to protect the fat content of fermented milk such as yoghurt. This experiment was to find out the effect of different solvent type on extraction pigment （aquadest： sitrat acid/lactic acid/sulfate acid/chloride acid） and to determine the effect of the addition of anthocyanins in protecting the fat content of yogurt on several levels addition. The research result showed that anthocyanin＇s pigment of red rose from petal flower＇s could be effective solvent extracted using lactic acid 0.02 M and increased fat stability of yoghurt. The anthocyanin pigment showed with HPLC analysis that pigment resulted TLC analysis at rite time 13.10 （as Cyanidin glucoside） and 22.61 （as Malvidin glucoside）. Yoghurt that given anthocyanin pigment has proven that fat content can be maintained its 86.7% （fat content with 2% pigment as such as 0.117% and without pigment 0.087%） after being stored for 6 days at cold and room temperature.
