The oxidative dehydrogenation （ODH） reactions of ethane and propane were investigated in a catalytic membrane reactor, incorporating oxygen-permeable membranes based upon La2Ni0.9V0.1O4＋δor Ba0.5Sr0.5Co0.8Fe0.2O3-...The oxidative dehydrogenation （ODH） reactions of ethane and propane were investigated in a catalytic membrane reactor, incorporating oxygen-permeable membranes based upon La2Ni0.9V0.1O4＋δor Ba0.5Sr0.5Co0.8Fe0.2O3-δ. As a compromise between the occurrence of a measureable oxygen flux and excessive homogenous gas phase reactions, the measurements were conducted at an intermediate temperature, either at 550 or 650 oC. The results show the dominating role of the oxygen flux across the membrane and available sites at the membrane surface in primary activation of the alkane and, hence, in achieving high alkane conversions. The experimental data of ODH of propane and ethane on both membrane materials can be reconciled on the basis of Mars-van Krevelen mechanism, in which the alkane reacts with lattice oxygen on the membrane surface to produce the corresponding olefin. It is further demonstrated that the oxygen concentration in the gas phase and on the membrane surface is crucial for determining the olefin selectivity.展开更多
An industrial scale propylene production via oxidative dehydrogenation of propane （ODHP） in multi-tubular re- actors was modeled. Multi-tubular fixed-bed reactor used for ODHP process, employing 10000 of small diame...An industrial scale propylene production via oxidative dehydrogenation of propane （ODHP） in multi-tubular re- actors was modeled. Multi-tubular fixed-bed reactor used for ODHP process, employing 10000 of small diameter tubes immersed in a shell through a proper coolant flows. Herein, a theory-based pseudo-homogeneous model to describe the operation of a fixed bed reactor for the ODHP to correspondence olefln over V2O5/γ-Al203 catalyst was presented. Steady state one dimensional model has been developed to identify the operation parameters and to describe the propane and oxygen conversions, gas process and coolant temperatures, as well as other pa- rameters affecting the reactor performance such as pressure. Furthermore, the applied model showed that a double-bed multitubular reactor with intermediate air injection scheme was superior to a single-bed design due to the increasing of propylene selectivity while operating under lower oxygen partial pressures resulting in propane conversion of about 37.3%. The optimized length of the reactor needed to reach 100% conversion of the oxygen was theoretically determined. For the single-bed reactor the optimized length of 11.96 m including 0.5 m of inert section at the entrance region and for the double-bed reactor design the optimized lengths of 5.72 m for the first and 7.32 m for the second reactor were calculated. Ultimately, the use of a distributed oxygen feed with limited number of injection points indicated a significant improvement on the reactor performance in terms of propane conversion and propylene selectivity. Besides, this concept could overcome the reactor run- away temperature problem and enabled operations at the wider range of conditions to obtain enhanced propyl- ene production in an industrial scale reactor.展开更多
The oxidative dehydrogenation of butane to butadiene and butene was studied using a conventional fixed-bed ractor (FBR), inert membrane reactor (IMR) and mixed inert membrane reactor (MIMR). When IMR and MIMR were emp...The oxidative dehydrogenation of butane to butadiene and butene was studied using a conventional fixed-bed ractor (FBR), inert membrane reactor (IMR) and mixed inert membrane reactor (MIMR). When IMR and MIMR were employed, a ceramic membrane modified by partially coating with glaze was used to distribute oxygen to a fixed-bed of 24-V-Mg-O catalyst. The oxygen partial pressure in the catalyst bed could be decreased. The effect of feeding modes and operation conditions were investigated. The selectivity of C4 dehydrogenation products (butene and butadiene) was found to be higher in IMR than in FBR. The feeding mode with 20% of air mixing with butane in MIMR was found to be more efficient than the feeding mode with all air permeating through ceramic membrane. The MIMR gave the most smooth temperature profile along the bed.展开更多
文摘The oxidative dehydrogenation （ODH） reactions of ethane and propane were investigated in a catalytic membrane reactor, incorporating oxygen-permeable membranes based upon La2Ni0.9V0.1O4＋δor Ba0.5Sr0.5Co0.8Fe0.2O3-δ. As a compromise between the occurrence of a measureable oxygen flux and excessive homogenous gas phase reactions, the measurements were conducted at an intermediate temperature, either at 550 or 650 oC. The results show the dominating role of the oxygen flux across the membrane and available sites at the membrane surface in primary activation of the alkane and, hence, in achieving high alkane conversions. The experimental data of ODH of propane and ethane on both membrane materials can be reconciled on the basis of Mars-van Krevelen mechanism, in which the alkane reacts with lattice oxygen on the membrane surface to produce the corresponding olefin. It is further demonstrated that the oxygen concentration in the gas phase and on the membrane surface is crucial for determining the olefin selectivity.
文摘An industrial scale propylene production via oxidative dehydrogenation of propane （ODHP） in multi-tubular re- actors was modeled. Multi-tubular fixed-bed reactor used for ODHP process, employing 10000 of small diameter tubes immersed in a shell through a proper coolant flows. Herein, a theory-based pseudo-homogeneous model to describe the operation of a fixed bed reactor for the ODHP to correspondence olefln over V2O5/γ-Al203 catalyst was presented. Steady state one dimensional model has been developed to identify the operation parameters and to describe the propane and oxygen conversions, gas process and coolant temperatures, as well as other pa- rameters affecting the reactor performance such as pressure. Furthermore, the applied model showed that a double-bed multitubular reactor with intermediate air injection scheme was superior to a single-bed design due to the increasing of propylene selectivity while operating under lower oxygen partial pressures resulting in propane conversion of about 37.3%. The optimized length of the reactor needed to reach 100% conversion of the oxygen was theoretically determined. For the single-bed reactor the optimized length of 11.96 m including 0.5 m of inert section at the entrance region and for the double-bed reactor design the optimized lengths of 5.72 m for the first and 7.32 m for the second reactor were calculated. Ultimately, the use of a distributed oxygen feed with limited number of injection points indicated a significant improvement on the reactor performance in terms of propane conversion and propylene selectivity. Besides, this concept could overcome the reactor run- away temperature problem and enabled operations at the wider range of conditions to obtain enhanced propyl- ene production in an industrial scale reactor.
基金Supported by the National Natural Science Foundation of China(No.29776005).
文摘The oxidative dehydrogenation of butane to butadiene and butene was studied using a conventional fixed-bed ractor (FBR), inert membrane reactor (IMR) and mixed inert membrane reactor (MIMR). When IMR and MIMR were employed, a ceramic membrane modified by partially coating with glaze was used to distribute oxygen to a fixed-bed of 24-V-Mg-O catalyst. The oxygen partial pressure in the catalyst bed could be decreased. The effect of feeding modes and operation conditions were investigated. The selectivity of C4 dehydrogenation products (butene and butadiene) was found to be higher in IMR than in FBR. The feeding mode with 20% of air mixing with butane in MIMR was found to be more efficient than the feeding mode with all air permeating through ceramic membrane. The MIMR gave the most smooth temperature profile along the bed.
