基于C-H键活化的铜催化二苄胺氧化酰胺化反应(英文)

基于铜催化的C-H键活化构建了一类高效的二苄胺氧化酰基化生成N-苄基苯甲酰胺的反应. 该反应使用CuBr作为催化剂,二乙酸碘苯作为氧化剂, 在温和条件下生成两种酰胺, 总产率最高可达92.0%. CuBr催化剂价廉易得, 催化活性高. 同时这也是首次使用二乙酸碘苯作为氧化剂, 通过二苄胺的直接氧化酰基化反应合成N-苄基苯甲酰胺.

Photoelectrochemical degradation of acetaminophen and valacyclovir using nanoporous titanium dioxide

Electrochemically treated nanoporous TiO2 was employed as a novel electrode to assist in the pho- toelectrochemical degradation of acetaminophen and valacyclovir. The prepared electrode was characterized by scanning electron microscopy （SEM） and energy dispersive spectroscopy （EDS）. Cyclic voltammetry （CV）, Mott-Schottky plots, ultraviolet-visible light （UV-vis） absorbance spec- troscopy, and a total organic carbon （TOC） analyzer were employed to investigate the photoelec- trochemical degradation of acetaminophen and valacyclovir. The results indicated no obvious re- moval of acetaminophen and valacyclovir over 3 h when separate photochemical degradation and electrochemical oxidation were employed. In contrast, acetaminophen and valacyclovir were rapid- ly eliminated via photoelectrochemical degradation. In addition, electrochemically treated nanopo~ rous TiO2 electrodes significantly enhanced the efficacy of the photoelectrochemical degradation of acetaminophen and valacyclovir, by 86.96% and 53.12%, respectively, when compared with un- treated nanoporous TiO2 electrodes. This enhanced performance may have been attributed to the formation of Ti3~, Ti2~, and oxygen vacancies, as well as an improvement in conductivity during the electrochemical reduction process. The effect of temperature was further investigated, where the activation energy of the photoelectrochemical degradation of acetaminophen and valacyclovir was determined to be 9.62 and 18.42 kJ/mol, respectively.

Catalytic role of Cu(I) species in Cu_2O/CuI supported on MWCNTs in the oxidative amidation of aryl aldehydes with 2-aminopyridines

Cu2O and Cul were supported on multiwalled carbon nanotubes （MWCNTs） using a wet impregna- tion method, and the resulting materials were fully characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy with energy dispersive X-ray spectroscopy, transmission electron microscopy, and temperature-programmed desorption with ammonia analysis. The results of these experiments revealed that Cu2O and CuI were deposited on the MWCNTs in the cubic and γ phases, respectively. These results also showed that the Cu-containing MWCNTs exhibited weak to strong electron-accepting （Lewis acidic） properties. The catalytic activities of these materials were studied for the synthesis of biologically significant N-（pyridin-2-yl）benzamides via the oxidative amidation of aryl aldehydes with 2-aminopyridines. The yields of the products were in the range 50%-95% with 100% selectivity. Notably, the CuI/MWCNT catalyst was much more effective than the Cu2O/MWCNT catalyst with respect to the isolated yield of the product, although the latter of these two catalysts exhibited much better recyclability. A preferential interaction was observed between the polar nature of the acid-activated MWCNTs and the ionic Cu2O compared with covalent CuL The differences in these interactions had a significant impact on the rate of the nucleophilic attack of the amino group of 2-aminopyridine substrate on the carbonyl group of the aryl aldehyde.

Kinetics of 2-Methyl-6-acetyl-naphthalene Liquid Phase Catalytic Oxidation

In this paper, a kinetics model for the liquid-phase oxidation of 2-methyl-6-acetyl-naphthalene to 2,6-naphthalene dicarboxylic acid catalyzed by cobalt-manganese-bromide is proposed. The effects of the reaction temperature, catalyst concentration and ratio of catalyst on the lime evolution of the experimental concentration for the constituents including raw material, intermediates and product are investigated. The model parameters are determined in a nonlinear optimization, minimizing the difference between the simulated and experimental time evolution of the product composition obtained in a semi-batch oxidation reactor where the gas and liquid phase were well nuxed. The kinetics data demonstrate that the model is suitable to the liquid-phase oxidation of 2-methyl-6-acetyl-naphthalene to 2,6-naphthalene dicarboxylic acid.

Selective aerobic oxidation promoted by highly efficient multi-nitroxy organocatalysts

Selective oxidation with molecular oxygen as the sole oxidant under mild conditions is of crucialimportance for the long‐term sustainable exploitation of available feedstocks and the formation ofrequired intermediates for organic synthesis and industrial processes.Among the developed oxidationprotocols,innovative strategies using hydroxyimide organocatalysts in combination with metallicor metal‐free cocatalysts have attracted much attention because of the good activities andselectivities of such catalysts in the oxo functionalization of hydrocarbons.This method is based onthe reaction using N‐hydroxyphthalimide,which was first reported by Ishii’s group in the1990s.Although the important and wide‐ranging applications of such catalysts have been summarizedrecently,there are no reviews that focus solely on oxidation strategies using multi‐nitroxy organocatalysts,which have interesting properties and high reactivities.This review covers the concisesynthetic methods and mechanistic profiles of known multi‐nitroxy organocatalysts and summarizessignificant advances in their use in efficient aerobic oxidation.Based on a combination of experimentaland theoretical results,guidelines for the future rational design of multi‐nitroxy organocatalystsare proposed,and the properties of various model multi‐nitroxy organocatalysts are predicted.The present overview of the advantages,limitations,and potential applications of multi‐nitroxyorganocatalysts can provide useful tools for researchers in the field of selective oxidation.

Oxidation of chalcopyrite in air-equilibrated acidic solution: Inhibition with phenacyl derivatives

The effects of 4-(2-hydroxyphenyl)-2-(morpholin-4-yl)-1,3-thiazole(Pr02), 1-(3,5-dibromo-2-hydroxyphenyl)-1-oxoethan-2-yl-N,N-diethyldithiocarbamate(Pr04) and 1-(5-bromo-2-hydroxy-3-methylphenyl)-1-oxoethan-2-yl-Oethyl xanthate(Pr06) on the aqueous oxidation of chalcopyrite(CuFeS2) in air-equilibrated solution at a temperature of 25 ℃ and a pH of 2.5 were studied. The effects were investigated by using potentiodynamic polarization, electrochemical impedance spectroscopy(EIS), scanning electron microscopy coupled with energy dispersive X-ray(SEM/EDX) analysis, aqueous batch experiments, Fourier transform infrared(FTIR) spectroscopy, Raman scattering and quantum chemical calculations. It is found that the anodic current densities decrease in the order of EtOH > Pr02 > Pr04 > Pr06. These results, along with those of the EIS measurements, show that Pr02, Pr04 and Pr06 are effective anodic inhibitors of chalcopyrite aqueous oxidation. Both Raman scattering and FTIR spectroscopy indicate that the elemental sulfur, polysulfide and ferric oxyhydroxides that form on the surface of the mineral are not responsible when it comes to the aqueous oxidation inhibition of chalcopyrite. Quantum chemical calculations show that the adsorption of the tested compounds on the chalcopyrite surface is energetically favorable and so, it can explain the inhibiting effects that were observed.

Redox-triggered hydroarylation of o-(hydroxyalkyl)arylalkynes with arylsulfonyl chlorides using visible light catalysis

A new radical-mediated method for the synthesis of 1-(2-(1,2-diarylvinyl)phenyl)ethan-1-ones by the redox hydroarylation of o-(hydroxyalkyl)arylalkynes with arylsulfonyl chlorides is described. This visible light catalysis method proceeds via a sequence of the radical addition of aryl group across the C?C triple bond, protonation and redox reaction, and represents a new redox transformation reaction directed by a neighboring hydroxyl group.