期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
自行车中轴冷挤模的氧氮化处理
1
作者 张士林 杨国英 《热加工工艺》 CSCD 北大核心 1990年第3期46-47,共2页
自行车中轴(20钢)经冷拔、磷皂化后,在400吨压力机上冷挤而成。冷挤过程中,凹模承受约2500~3000MN/m^2的压力,使模具受到强烈的磨损和温度升高。因此,经常规淬火回火后的W18Cr4V及W6Mo5Cr4V2高速钢制凹模的失效形式主要是磨损,个别也... 自行车中轴(20钢)经冷拔、磷皂化后,在400吨压力机上冷挤而成。冷挤过程中,凹模承受约2500~3000MN/m^2的压力,使模具受到强烈的磨损和温度升高。因此,经常规淬火回火后的W18Cr4V及W6Mo5Cr4V2高速钢制凹模的失效形式主要是磨损,个别也因模具材料碳化物偏析而产生整体碎裂现象。 展开更多
关键词 冷挤模 中轴 氧氮化处理 自行车
下载PDF
混料铣槽刀的补救措施
2
作者 田学佳 《热处理》 CAS 1990年第3期61-61,共1页
我厂使用的仪表钻头铣槽刀属薄刃小刀具。铣槽刀的材料是W18Cr4V。有一次由于混料错把W6Mo5Cr4V<sub>2</sub>当作W18Cr4V加以热处理,从而造成20多件铣槽刀很不耐磨,操作时还发生不正常的响声。
关键词 铣槽 混料 氧氮化处理 淬火温度 刃磨 炉冷 二业 修磨
下载PDF
《摩托车技术》1991年总目次
3
《摩托车技术》 1991年第6期43-45,共3页
关键词 摩托车技术 摩托车工业 两轮摩托车 边三轮摩托车 前叉 制动蹄 尺寸链 氧氮化处理 铃木 金翼
下载PDF
Nitrous Oxide Production in a Sequence Batch Reactor Wastewater Treatment System Using Synthetic Wastewater 被引量:5
4
作者 MAO Jian JIANG Xiao-Qin +4 位作者 YANG Lin-Zhang ZHANG Jian QIAO Qing-Yun HE Chen-Da YIN Shi-Xue 《Pedosphere》 SCIE CAS CSCD 2006年第4期451-456,共6页
The rate of nitrous oxide emission from a laboratory sequence batch reactor (SBR) wastewater treatment system using synthetic wastewater was measured under controlled conditions. The SBR was operated in the mode of ... The rate of nitrous oxide emission from a laboratory sequence batch reactor (SBR) wastewater treatment system using synthetic wastewater was measured under controlled conditions. The SBR was operated in the mode of 4 h for aeration, 3.5 h for stirring without aeration, 0.5 h for settling and drainage, and 4 h of idle. The sludge was acclimated by running the system to achieve a stable running state as chemical oxygen demand, NO2^-, NO3^-, NH4^+, pH, and N2O. indicated by rhythmic changes of total N, dissolved oxygen, Under the present experimental conditions measured nitrous oxide emitted from the off-gas in the aerobic and anaerobic phases, respectively, accounted for 8.6%-16.1% and 0-0.05% of N removed, indicating that the aerobic phase was the main source of N2O emission from the system. N2O dissolved in discharged water was considerable in term of concentration. Thus, measures to be developed for the purpose of reducing N2O emission from the system should be effective in the aeration phase. 展开更多
关键词 DENITRIFICATION NITRIFICATION nitrous oxide sequence batch reactor wastewater treatment system
下载PDF
Process control technology of low NO_x sintering based on coke pretreatment 被引量:3
5
作者 WANG Zhao-cai ZHOU Zhi-an +2 位作者 GAN Min FAN Xiao-hui HE Guo-qiang 《Journal of Central South University》 SCIE EI CAS CSCD 2020年第2期469-477,共9页
Process control is an effective approach to reduce the NOx emission from sintering flue gas.The effects of different materials adhered on coke breeze on NOx emission characteristics and sintering performance were stud... Process control is an effective approach to reduce the NOx emission from sintering flue gas.The effects of different materials adhered on coke breeze on NOx emission characteristics and sintering performance were studied.Results showed that the coke breeze adhered with the mixture of CaO and Fe2O3 or calcium ferrite significantly lowers the NOx emission concentration and conversion ratio of fuel-N to NOx.Pretreating the coke with the mixture of lime slurry and iron ore fines helped to improve the granulation effect,and optimize the carbon distribution in granules.When the mass ratio of coke breeze,quick lime,water and iron ore fines was 2:1:1:1,the average NOx emission concentration was decreased from 220 mg/m3 to 166 mg/m3,and the conversion ratio of fuel-N was reduced from 54.2%to 40.9%. 展开更多
关键词 iron ore sintering nitrogen oxide process control coke breeze pretreatment
下载PDF
A Combined System for Biological Removal of Nitrogen and Carbon from Nylon-6 Production Wastewater
6
作者 刘芳 刘国华 +2 位作者 田晴 张曼 陈季华 《Journal of Donghua University(English Edition)》 EI CAS 2007年第6期700-706,共7页
A combined system consisting of hydrolysis acidification, denitrification and nitrification reactors was used to remove carbon and nitrogen from the nylon - 6 production wastewater, which was characterized by good bio... A combined system consisting of hydrolysis acidification, denitrification and nitrification reactors was used to remove carbon and nitrogen from the nylon - 6 production wastewater, which was characterized by good biodegradability and high nitrogen concentration. The influences of Chemical Oxygen Demand (COD) in the influent, recirculation ratio, Hydraulic Residence Time (HRT) and Dissolved Oxygen (DO) concentration on the system performances were investigated. From results it could be seen that good performances have been achieved during the overall experiments periods, and COD, Total Nitrogen (TN), NH^+ -N and Suspended Solids (SS) in the effluent were 53, 16, 2 and 24 mg· L^-1, respectively, which has satisfied the first standard of wastewater discharge established by Environmental Protection Agency (EPA) of China. Furthermore, results showed that operation factors, viz. COD in the influent, recirculation ratio, HRT and DO concentration, all had important influences on the system performances. 展开更多
关键词 Nylon-6 production wastewater hydrolysis acidification submerged biofilm reactor biological nitrogen removal
下载PDF
China's Greenhouse Gas Emissions from Solid Waste Sector: Future Trends and Peak Value
7
《China Economist》 2012年第2期26-36,共11页
Waste disposal is a major source of greenhouse gas emissions such as methane, carbon dioxide and nitrous oxide. In China, rapid economic growth and urbanization have led to increasing solid waste generation and greenh... Waste disposal is a major source of greenhouse gas emissions such as methane, carbon dioxide and nitrous oxide. In China, rapid economic growth and urbanization have led to increasing solid waste generation and greenhouse gas emissions from the waste sector. Based on the first-order decay (FOD) method recommended by the 2006 IPCC Guidelines, this paper systematically estimates China's carbon emissions from the waste sector and forecasts their peak. Results indicate that between 1981 and 2009, China's carbon emissions from the waste sector surged, possibly peaking by around 2024. In comparison with developed countries, there is a large potential to improve waste disposal in China. Industrial upgradation and waste disposal improvement will help reduce waste generation and carbon emissions from the waste sector. 展开更多
关键词 solid waste greenhouse gas peak value first-order decay (FOD)JEL: Q53
下载PDF
成都量具刃具厂质量不断提高 创汇年年增多
8
《中国经贸导刊》 1986年第2期23-,共1页
成都量具刃具厂重视产品质量,积极进行对外宣专,严守信誉,产品出口额逐年增长。1985年出口额可望突破1,000万元,比1980年增长3.25倍。他们采取的基本方法是:坚持质量第一,以质取胜。他们以“质量是企业的生命,品种是企业的前途”为指导... 成都量具刃具厂重视产品质量,积极进行对外宣专,严守信誉,产品出口额逐年增长。1985年出口额可望突破1,000万元,比1980年增长3.25倍。他们采取的基本方法是:坚持质量第一,以质取胜。他们以“质量是企业的生命,品种是企业的前途”为指导思想,教育全厂职工坚持质量第一,做到不让出口产品的声誉受损失。近几年来,他们不断开展产品升级创优活动。 展开更多
关键词 产品出口额 出口产品 产品升级 以质 指导思想 技术改造投资 优质产品 氧氮化处理 国际市场 山特维克公司
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部