Gold stabilized on reducible oxide （CeO2 and FeOx） and irreducible oxide （γ‐Al2O3, SiO2, and HZSM‐5） were prepared by deposition precipitation method and tested for catalytic oxidation of formaldehyde （HCHO） ...Gold stabilized on reducible oxide （CeO2 and FeOx） and irreducible oxide （γ‐Al2O3, SiO2, and HZSM‐5） were prepared by deposition precipitation method and tested for catalytic oxidation of formaldehyde （HCHO） at room temperature under high GHSV of 600000 ml/（g＆#183;s）. Au/γ‐Al2O3 cata‐lyst showed distinctive catalytic performance, presenting the highest initial HCHO conversion and stability. Correlating the reaction rate with Au particle size, there is a linear relationship, suggesting that the smaller Au particle size with higher dispersion possesses high reactivity for HCHO oxida‐tion. All the catalysts deactivated at high GHSV （600000 ml/（g＆#183;s））, but in a quite different rate. Re‐ducible oxide （CeO2 and FeOx） could stabilize gold through O linkage and therefore exhibits a better stability for HCHO oxidation reaction. However, the aggregation of gold particles occurred over Au/SiO2 and Au/HZSM‐5 catalysts, which result in the fast deactivation. Therefore, our results sug‐gest that the reducibility of the supports for Au catalysis has no direct influence on the activity, but affects the catalytic stability.展开更多
An immature pinecone shaped hierarchically structured zirconia （ZrO2-ipch） and a cobblestone-like zirconia nanoparticulate （ZrO2-cs）, both with the monoclinic phase （m-phase）, were synthesized by the facile hydr...An immature pinecone shaped hierarchically structured zirconia （ZrO2-ipch） and a cobblestone-like zirconia nanoparticulate （ZrO2-cs）, both with the monoclinic phase （m-phase）, were synthesized by the facile hydrothermal method and used as the support for a Ni catalyst for the dry reforming of methane （DRM） with CO2. ZrO2-ipch is a much better support than ZrO2-cs and the traditional ZrO2 irregular particles made by a simple precipitation method （ZrO2-ip）. The supported Ni catalyst on ZrO2-ipch （Ni/ZrO2-ipch） exhibited outstanding catalytic activity and coke-resistant stability compared to the ones on ZrO2-cs （Ni/ZrO2-cs） and ZrO2-ip （Ni/ZrO2-ip）. Ni/ZrO2-ip exhibited the worst catalytic performance. The origin of the significantly enhanced catalytic performance was revealed by characterization including XRD, N2 adsorption measurement （BET）, TEM, H2-TPR, CO chemisorption, CO2-TPD, XPS and TGA. The superior catalytic activity of Ni/ZrO2-ipch to Ni/ZrO2-cs or Ni/ZrO2-ip was ascribed to a higher Ni dispersion, increased reducibility, enhanced oxygen mo- bility, and more basic sites with a higher strength, which were due to the unique hierarchically structural morphology of the ZrO2-ipch support. Ni/ZrO2-ipch exhibited better stability for the DRM reaction than Ni/ZrO2-ip, which was ascribed to its higher resistance to Ni sintering due to a strengthened metal-support interaction and the confinement effect of the mesopores and coke deposition resistance. The higher coking resistance of Ni/ZrO2-ipch for the DRM reaction in comparison with Ni/ZrOz-ip orignated from the coke-removalabitity of the higher amount of lattice oxygen and more basic sites, confirmed by XPS and CO2-TPD analysis, and the stabilized Ni on the Ni/ZrO2-ipch catalyst by the confinement effect of the mesopores of the hierarchical ZrO2-ipch sup- port. The superior catalytic performance and coking resistance of the Ni/ZrO2-ipch catalyst makes it a promising candidate for synthesis gas production from the DRM reaction.展开更多
An FeOx‐based Pt single‐atom catalyst(SAC),Pt1/FeOx,has stimulated significant recent interest owing to its extraordinary activity toward CO oxidation.The concept of SAC has also been successfully extended to other ...An FeOx‐based Pt single‐atom catalyst(SAC),Pt1/FeOx,has stimulated significant recent interest owing to its extraordinary activity toward CO oxidation.The concept of SAC has also been successfully extended to other FeOx supported transition metal systems both experimentally and theoretically.However,the FeOx substrate itself(denoted by Fe1/FeOx following the same nomenclature of Pt1/FeOx)as a typical transition metal oxide possesses a very low catalytic activity toward CO oxidation,although it can be viewed as Fe1/FeOx SAC.Here,to understand the catalytic mechanism of FeOx‐based SACs for CO oxidation,we have performed density functional theory calculations on Pt1/FeOx and Fe1/FeOx for CO oxidation to address the differences between these two SACs in terms of the catalytic mechanism of CO oxidation and the chemical behavior of the catalysts.Our calculation results indicated that the catalytic cycle of Fe1/FeOx is much more difficult to accomplish than that of SAC Pt1/FeOx because of a high activation barrier(1.09eV)for regeneration of the oxygen vacancy formed when the second CO2molecule desorbs from the surface.Moreover,density of states and Bader charge analysis revealed differences in the catalytic performance for CO oxidation by the SACs Fe1/FeOx and Pt1/FeOx.This work provides insights into the fundamental interactions between the single‐atom Pt1and FeOx substrate,and the exceptional catalytic performance of this system for CO oxidation.展开更多
A series of catalysts consisting of three‐dimensionally ordered macroporous(3DOM)x‐CeO2/Al2O3‐supported Au nanoparticles(x=2,10,20,and40wt%)were successfully synthesized using a reduction‐deposition method.These c...A series of catalysts consisting of three‐dimensionally ordered macroporous(3DOM)x‐CeO2/Al2O3‐supported Au nanoparticles(x=2,10,20,and40wt%)were successfully synthesized using a reduction‐deposition method.These catalysts were characterized using scanning electron microscopy,the Brunauer‐Emmett‐Teller method,X‐ray diffraction,transmission electron microscopy,ultraviolet‐visible spectroscopy,and temperature‐programmed reduction by H2.Au nanoparticles of mean particle size5nm were well dispersed and supported on the inner walls of uniform macropores.The3DOM structure improved the contact efficiency between soot and the catalyst.An Al‐Ce‐O solid solution was formed in the multilayer support,i.e.,x‐CeO2/Al2O3,by the incorporation of Al3+ions into the CeO2lattice,which resulted in the creation of extrinsic oxygen vacancies.Strong interactions between the metal(Au)and the support(Ce)increased the amount of active oxygen species,and this promoted soot oxidation.The catalytic performance in soot combustion was evaluated using a temperature‐programmed oxidation technique.The presence of CeO2nanolayers in the3DOM Au/x‐CeO2/Al2O3catalysts clearly improved the catalytic activities in soot oxidation.Among the prepared catalysts,3DOM Au/20%CeO2/Al2O3showed high catalytic activity and stability in diesel soot oxidation.展开更多
A mathematical model has been developed to describe the dynamic behaviours of NO+CO reaction on supported Pt MO catalyst. The ignited state kinetics can be fit quantitatively using directly a Langmuir Henshelwood bimo...A mathematical model has been developed to describe the dynamic behaviours of NO+CO reaction on supported Pt MO catalyst. The ignited state kinetics can be fit quantitatively using directly a Langmuir Henshelwood bimolecular rate expression with a heat of adsorption of NO of 32 4 kJ/mol and of CO of 106 7 kJ/mol, respectively.展开更多
基金supported by the National Natural Science Foundation of China(21373037,21577013)China Postdoctoral Science Foundation(2014M560201)the Fundamental Research Funds for the Central Universities(DUT15TD49,DUT16ZD224)~~
文摘Gold stabilized on reducible oxide （CeO2 and FeOx） and irreducible oxide （γ‐Al2O3, SiO2, and HZSM‐5） were prepared by deposition precipitation method and tested for catalytic oxidation of formaldehyde （HCHO） at room temperature under high GHSV of 600000 ml/（g＆#183;s）. Au/γ‐Al2O3 cata‐lyst showed distinctive catalytic performance, presenting the highest initial HCHO conversion and stability. Correlating the reaction rate with Au particle size, there is a linear relationship, suggesting that the smaller Au particle size with higher dispersion possesses high reactivity for HCHO oxida‐tion. All the catalysts deactivated at high GHSV （600000 ml/（g＆#183;s））, but in a quite different rate. Re‐ducible oxide （CeO2 and FeOx） could stabilize gold through O linkage and therefore exhibits a better stability for HCHO oxidation reaction. However, the aggregation of gold particles occurred over Au/SiO2 and Au/HZSM‐5 catalysts, which result in the fast deactivation. Therefore, our results sug‐gest that the reducibility of the supports for Au catalysis has no direct influence on the activity, but affects the catalytic stability.
基金financially supported by the Joint Fund of Coal, set up by National Natural Science Foundation of China and Shenhua Co., Ltd.(U1261104)the National Natural Science Foundation of China (21276041)+3 种基金the Program for New Century Excellent Talents in University (NCET-12-0079)the Natural Science Foundation of Liaoning Province (2015020200)the Fundamental Research Funds for the Central Universities (DUT15LK41)the Science and Technology Development Program of Hangzhou (20130533B14)~~
文摘An immature pinecone shaped hierarchically structured zirconia （ZrO2-ipch） and a cobblestone-like zirconia nanoparticulate （ZrO2-cs）, both with the monoclinic phase （m-phase）, were synthesized by the facile hydrothermal method and used as the support for a Ni catalyst for the dry reforming of methane （DRM） with CO2. ZrO2-ipch is a much better support than ZrO2-cs and the traditional ZrO2 irregular particles made by a simple precipitation method （ZrO2-ip）. The supported Ni catalyst on ZrO2-ipch （Ni/ZrO2-ipch） exhibited outstanding catalytic activity and coke-resistant stability compared to the ones on ZrO2-cs （Ni/ZrO2-cs） and ZrO2-ip （Ni/ZrO2-ip）. Ni/ZrO2-ip exhibited the worst catalytic performance. The origin of the significantly enhanced catalytic performance was revealed by characterization including XRD, N2 adsorption measurement （BET）, TEM, H2-TPR, CO chemisorption, CO2-TPD, XPS and TGA. The superior catalytic activity of Ni/ZrO2-ipch to Ni/ZrO2-cs or Ni/ZrO2-ip was ascribed to a higher Ni dispersion, increased reducibility, enhanced oxygen mo- bility, and more basic sites with a higher strength, which were due to the unique hierarchically structural morphology of the ZrO2-ipch support. Ni/ZrO2-ipch exhibited better stability for the DRM reaction than Ni/ZrO2-ip, which was ascribed to its higher resistance to Ni sintering due to a strengthened metal-support interaction and the confinement effect of the mesopores and coke deposition resistance. The higher coking resistance of Ni/ZrO2-ipch for the DRM reaction in comparison with Ni/ZrOz-ip orignated from the coke-removalabitity of the higher amount of lattice oxygen and more basic sites, confirmed by XPS and CO2-TPD analysis, and the stabilized Ni on the Ni/ZrO2-ipch catalyst by the confinement effect of the mesopores of the hierarchical ZrO2-ipch sup- port. The superior catalytic performance and coking resistance of the Ni/ZrO2-ipch catalyst makes it a promising candidate for synthesis gas production from the DRM reaction.
基金supported by the National Natural Science Foundation of China(21503046,21373206,21203182)the National Basic Research Program of China(2013CB834603)+3 种基金the Natural Science Foundation of Guizhou Province of China(QKJ(2015)2122)Natural Science foundation of Department of Education of Guizhou Province(QJTD(2015)55 and ZDXK(2014)18)the GZEU startup packagethe Open Fund of Shaanxi Key Laboratory of Catalysis to JXL(SXKLC-2017-01)~~
文摘An FeOx‐based Pt single‐atom catalyst(SAC),Pt1/FeOx,has stimulated significant recent interest owing to its extraordinary activity toward CO oxidation.The concept of SAC has also been successfully extended to other FeOx supported transition metal systems both experimentally and theoretically.However,the FeOx substrate itself(denoted by Fe1/FeOx following the same nomenclature of Pt1/FeOx)as a typical transition metal oxide possesses a very low catalytic activity toward CO oxidation,although it can be viewed as Fe1/FeOx SAC.Here,to understand the catalytic mechanism of FeOx‐based SACs for CO oxidation,we have performed density functional theory calculations on Pt1/FeOx and Fe1/FeOx for CO oxidation to address the differences between these two SACs in terms of the catalytic mechanism of CO oxidation and the chemical behavior of the catalysts.Our calculation results indicated that the catalytic cycle of Fe1/FeOx is much more difficult to accomplish than that of SAC Pt1/FeOx because of a high activation barrier(1.09eV)for regeneration of the oxygen vacancy formed when the second CO2molecule desorbs from the surface.Moreover,density of states and Bader charge analysis revealed differences in the catalytic performance for CO oxidation by the SACs Fe1/FeOx and Pt1/FeOx.This work provides insights into the fundamental interactions between the single‐atom Pt1and FeOx substrate,and the exceptional catalytic performance of this system for CO oxidation.
基金supported by the National High Technology Research and Development Program of China(863 Program,2015AA034603)the National Natural Science Foundation of China(21477146,21673142 and 21303263)+2 种基金the Beijing Nova Program(Z141109001814072)the Specialized Research Fund for the Doctoral Program of Higher Education(20130007120011)the Science Foundation of China University of Petroleum-Beijing(YJRC-2013-13,2462013BJRC003)~~
文摘A series of catalysts consisting of three‐dimensionally ordered macroporous(3DOM)x‐CeO2/Al2O3‐supported Au nanoparticles(x=2,10,20,and40wt%)were successfully synthesized using a reduction‐deposition method.These catalysts were characterized using scanning electron microscopy,the Brunauer‐Emmett‐Teller method,X‐ray diffraction,transmission electron microscopy,ultraviolet‐visible spectroscopy,and temperature‐programmed reduction by H2.Au nanoparticles of mean particle size5nm were well dispersed and supported on the inner walls of uniform macropores.The3DOM structure improved the contact efficiency between soot and the catalyst.An Al‐Ce‐O solid solution was formed in the multilayer support,i.e.,x‐CeO2/Al2O3,by the incorporation of Al3+ions into the CeO2lattice,which resulted in the creation of extrinsic oxygen vacancies.Strong interactions between the metal(Au)and the support(Ce)increased the amount of active oxygen species,and this promoted soot oxidation.The catalytic performance in soot combustion was evaluated using a temperature‐programmed oxidation technique.The presence of CeO2nanolayers in the3DOM Au/x‐CeO2/Al2O3catalysts clearly improved the catalytic activities in soot oxidation.Among the prepared catalysts,3DOM Au/20%CeO2/Al2O3showed high catalytic activity and stability in diesel soot oxidation.
文摘A mathematical model has been developed to describe the dynamic behaviours of NO+CO reaction on supported Pt MO catalyst. The ignited state kinetics can be fit quantitatively using directly a Langmuir Henshelwood bimolecular rate expression with a heat of adsorption of NO of 32 4 kJ/mol and of CO of 106 7 kJ/mol, respectively.
