期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
热解氧钒碱式碳酸铵法M型二氧化钒粉体的制备
1
作者 徐慢 赵静 +3 位作者 王树林 祝云 王桂荣 关岭 《武汉工程大学学报》 CAS 2014年第6期20-24,共5页
以五氧化二钒、浓盐酸、水合肼和碳酸氢铵为原料,合成氧矾碱式碳酸铵前驱体,并通过控制退火温度在氮气气氛下热处理前驱体制备M型二氧化钒粉体。采用X射线衍射、差热分析、扫描电子显微镜等方法对样品成分、相变温度和晶体形貌进行了分... 以五氧化二钒、浓盐酸、水合肼和碳酸氢铵为原料,合成氧矾碱式碳酸铵前驱体,并通过控制退火温度在氮气气氛下热处理前驱体制备M型二氧化钒粉体。采用X射线衍射、差热分析、扫描电子显微镜等方法对样品成分、相变温度和晶体形貌进行了分析。结果显示:当升温速率和保温时间一定时,不同的热处理温度和气氛对粉体的晶型和成分有重要影响;不同的热处理温度热解氧钒碱式碳酸铵,保温30min能得到不同价态的氧化钒粉体;当500℃温度热处理30min时,可以得到纯的M型二氧化钒粉体。有序结构的理论晶粒尺寸为20~40nm,实际颗粒尺寸在1μm左右,粉体相变温度为66℃;通过热处理氧钒碱式碳酸铵前驱体可以制备M型二氧化钒粉体,工艺简单、条件容易控制。 展开更多
关键词 氧钒碱式碳酸铵 热分解
下载PDF
氧钒(Ⅳ)碱式碳酸铵的氨解和纳米VN的制备 被引量:3
2
作者 傅群 张新民 +2 位作者 韦柳娅 雷德铭 郑臣谋 《无机化学学报》 SCIE CAS CSCD 北大核心 2003年第10期1104-1108,共5页
氮化钒(VN)具有十分高的热、化学稳定性和强的机械性能,用于切削工具和结构材料[1,2].VN作为催化剂,具有高催化活性、高选择性、良好的稳定性和抗中毒性能[3,4]:其催化行为类似Pt、Pd和Rh,是这些稀贵金属的经济的代用物[5].
关键词 (Ⅳ)碱式碳酸铵 氨解 纳米 制备 纳米材料
下载PDF
氧钒(Ⅳ)碱式碳酸铵的热分析和纳米氧化钒的制备 被引量:2
3
作者 韦柳娅 傅群 +2 位作者 林晨 储向峰 郑臣谋 《无机化学学报》 SCIE CAS CSCD 北大核心 2003年第9期1006-1010,共5页
The violet polycrystalline (NH4)5[(VO)6(CO3)4(OH)9]·10H2O(NVCO) was simply sy nthesized by solution reaction using V2O5, HCl, N2H4·2HCl and NH4HCO3 as the st arting materials. The results of TGA and DTA of N... The violet polycrystalline (NH4)5[(VO)6(CO3)4(OH)9]·10H2O(NVCO) was simply sy nthesized by solution reaction using V2O5, HCl, N2H4·2HCl and NH4HCO3 as the st arting materials. The results of TGA and DTA of NVCO under H2(99.999%) atmosphe re show that V2O3 forms at 620℃. The data of TG/DTG and DTA of NVCO under N2(99 .999%) atmosphere indicate that VO2 forms at 367℃and crystallizes at 390℃. In air atmosphere, the TG/DTG and DTA of NVCO show that V2O5 forms at 354℃, cryst allizes at 366℃and melts at 664℃. The three thermolysis processes of NVCO show that a large amount of H2O, CO2 and NH3 gases fast releases during the thermoly sis of NVCO, causing that the particles of the materials split and atomize stron gly, thus to obtain V2O3, VO2 and V2O5 nano-powders finally. According to the a bove of thermoanalytical results, V2O3, VO2 and V2O5 powders were prepared respe ctively under H2, N2 and oxygen in a tube furnace. Chemical analysis and XRD exp eriments of the powders identify that pure V2O3 is obtained at 800℃for 0.5h und er H2 atmosphere; crystalline VO2 is obtained at 480℃for 0.5h in N2; amorphous VO2 is obtained at 350℃for 20min under N2 atmosphere, this has been first repor ted to prepare amorphous VO2 powder so far; pure V2O5 is obtained at 400℃for 10 min under oxygen. From the micrographs of the powders, the particle size of the V2O3, the crystalline VO2 or the V2O5 powders is 35nm, 24nm or < 40nm, respectiv ely. Above-mentioned results prove that NVCO is a good precursor for preparatio n of pure V2O3, VO2 and V2O5 nano-powders under mild conditions. 展开更多
关键词 (Ⅳ)碱式碳酸铵 热分析 纳米
下载PDF
纳米氮化钒粉体的合成 被引量:3
4
作者 张新民 林晨 +2 位作者 傅群 雷德铭 郑臣谋 《中山大学学报(自然科学版)》 CAS CSCD 北大核心 2002年第6期114-116,共3页
研究了氧钒 (Ⅳ )碱式碳酸铵在NH3气氛下的热分解过程 ,并以其为前驱体制备了粒度约为 30nm的氮化钒粉体。
关键词 纳米氮化粉体 合成 纳米材料 前体路线 热分解 前驱体 氧钒碱式碳酸铵
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部