Production of 6-aminopenicillanic acid (6-APA) by hydrolysis using penicillin acylase (PA) was studied as a model of an enzymatic emulsion liquid membrane (ELM) process. The loss of PA activity was examined for variou...Production of 6-aminopenicillanic acid (6-APA) by hydrolysis using penicillin acylase (PA) was studied as a model of an enzymatic emulsion liquid membrane (ELM) process. The loss of PA activity was examined for various membrane compositions (organic solvent, surfactant, carrier). The effects of some experimental variables on the stability of emulsion were investigated. It was found that the choice of organic solvent greatly affected the stability of the emulsion. Increasing the concentration of the carrier in the membrane phase increases the transfer rate of substrate and products but also has a destabilizing effect on the emulsion. The recovery of 6-APA obtained by a di-carrier system (N263-N1923) was much higher than those when either of the di-carriers was used separately. The whole process was controlled both by the enzymatic reaction rate and by the transfer rate of the substrate and the products, however, the ratio of them could be changed by varying the composition of the system. For an optimum condition, it was obtained that the recovery ratio of 6-APA was over 80% and the conversion of benzyl penicillin (PG) was up to 90% in the external phase after 30 minutes. Meanwhile, the breakage percentage of the emulsion was less than 2%.展开更多
General evaluation of isolate Bacillus thuringiensis （Bt-ASF-1） used as biocide in meddle scale application was conducted. Some morphological and confirmation tests were achieved. The sensitivity tests had been acco...General evaluation of isolate Bacillus thuringiensis （Bt-ASF-1） used as biocide in meddle scale application was conducted. Some morphological and confirmation tests were achieved. The sensitivity tests had been accomplished by diffusion and dilution techniques to determine the response of isolate against the antibiotics. The results of diffusion tests showed to the sensitivity of bacteria to antibiotics of cefixime, erythromycin, gentamicin and tetracycline respectively. It was resistant to trimethoprim sulfonamide （TMP）, bacitracin, penicillin and all its generations, and moderate resistance to nalidixic acid. Minimum Inhibitory Concentration （MIC） for amoxicillin was ranged between 30-40 pg/mL and these results are an approximation of the universal findings. Curing experiments showed the effective role of sodium dodecyl sulfate （SDS） （1.5%） comparing with temperature. The bacterial cells became sensitive to amoxicillin and TMP. The curing by temperature did not differ significantly from control treatment in plasmid pattern or antibiotics response. Plasmid profile referring that curing by SDS has been caused disturbance in beta -lactamase genes through the sensitivity to amoxicillin and remaining resistance to ampicillin. Curing isolate by SDS also became more sensitive to nalidixic acid, erythromycin and tetracycline respectively. It was found from the curing treatments the complexity distribution of r-genes between different plasmid size and chromosome but not effect on their insecticidal ability.展开更多
基金the National Natural Science Foundation of China (No. 29136130).
文摘Production of 6-aminopenicillanic acid (6-APA) by hydrolysis using penicillin acylase (PA) was studied as a model of an enzymatic emulsion liquid membrane (ELM) process. The loss of PA activity was examined for various membrane compositions (organic solvent, surfactant, carrier). The effects of some experimental variables on the stability of emulsion were investigated. It was found that the choice of organic solvent greatly affected the stability of the emulsion. Increasing the concentration of the carrier in the membrane phase increases the transfer rate of substrate and products but also has a destabilizing effect on the emulsion. The recovery of 6-APA obtained by a di-carrier system (N263-N1923) was much higher than those when either of the di-carriers was used separately. The whole process was controlled both by the enzymatic reaction rate and by the transfer rate of the substrate and the products, however, the ratio of them could be changed by varying the composition of the system. For an optimum condition, it was obtained that the recovery ratio of 6-APA was over 80% and the conversion of benzyl penicillin (PG) was up to 90% in the external phase after 30 minutes. Meanwhile, the breakage percentage of the emulsion was less than 2%.
文摘General evaluation of isolate Bacillus thuringiensis （Bt-ASF-1） used as biocide in meddle scale application was conducted. Some morphological and confirmation tests were achieved. The sensitivity tests had been accomplished by diffusion and dilution techniques to determine the response of isolate against the antibiotics. The results of diffusion tests showed to the sensitivity of bacteria to antibiotics of cefixime, erythromycin, gentamicin and tetracycline respectively. It was resistant to trimethoprim sulfonamide （TMP）, bacitracin, penicillin and all its generations, and moderate resistance to nalidixic acid. Minimum Inhibitory Concentration （MIC） for amoxicillin was ranged between 30-40 pg/mL and these results are an approximation of the universal findings. Curing experiments showed the effective role of sodium dodecyl sulfate （SDS） （1.5%） comparing with temperature. The bacterial cells became sensitive to amoxicillin and TMP. The curing by temperature did not differ significantly from control treatment in plasmid pattern or antibiotics response. Plasmid profile referring that curing by SDS has been caused disturbance in beta -lactamase genes through the sensitivity to amoxicillin and remaining resistance to ampicillin. Curing isolate by SDS also became more sensitive to nalidixic acid, erythromycin and tetracycline respectively. It was found from the curing treatments the complexity distribution of r-genes between different plasmid size and chromosome but not effect on their insecticidal ability.
