This paper studies the structure and properties of the polycarbonate polyurethane epoxy resin (PCPU EP) blends being resistant to hydrolysis.The samples were analyzed by an infrared spectrome...This paper studies the structure and properties of the polycarbonate polyurethane epoxy resin (PCPU EP) blends being resistant to hydrolysis.The samples were analyzed by an infrared spectrometer,a differential scanning calorimeter,a scanning electron microscope and a dynamic viscoelastometer.The results show that PCPU EP blends have excellent resistance to hydrolysis and mechanical properties at the ratio of PCPU to EP equal to 10/100 (wt/wt).展开更多
UV-curable polyurethane prepolymer and photoinitiator 1173 were facilely encapsulated in a poly（urea-formaldehyde） shell, which was in situ formed by the polymerization of formalde-hyde and urea in an oil-in-water e...UV-curable polyurethane prepolymer and photoinitiator 1173 were facilely encapsulated in a poly（urea-formaldehyde） shell, which was in situ formed by the polymerization of formalde-hyde and urea in an oil-in-water emulsion. The diameters of the microcapsules ranged from 118 μm to 663 μm depending on agitation speed, and were obtained via optical mi-croscopy and scanning electron microscopy analyses. The encapsulation percent and the yield of microcapsules prepared at the agitation speed of 600 r/min can reach 97.52wt% and 65.23wt%, respectively. When the water-borne polyurethane （WPU） coating embedded with the prepared microcapsules were scratched, the healing agent could be released from rup-tured microcapsules and lled the scribed region. The excellent anticorrosion properties of the WPU coating embedded with the prepared microcapsules were con rmed by the results obtained from both electrochemical impedance spectroscopy and Tafel curves.展开更多
A series of Polyurethane (PU)/bisphenol A based Epoxy Resin(EP) Interpenetrating Polymer Networks(IPN) were synthesized and characterized by SEM, DSC, TGA and DMTA. It was found that IPN shows the best compatibility a...A series of Polyurethane (PU)/bisphenol A based Epoxy Resin(EP) Interpenetrating Polymer Networks(IPN) were synthesized and characterized by SEM, DSC, TGA and DMTA. It was found that IPN shows the best compatibility and damping properties when the ratio of PU/EP is 80 to 20. The results show that chain-extender and higher molecular weight of PPG are able to improve the properties of compatibility, damping and thermal properties.展开更多
In a changing world with a high interest in new ecomaterials, natural fibers such as the steelwool or Luffa cylindriea appear in new presentations and mixing with other materials to develop better opportunities to rep...In a changing world with a high interest in new ecomaterials, natural fibers such as the steelwool or Luffa cylindriea appear in new presentations and mixing with other materials to develop better opportunities to replace synthetic fibers. This work presents a research on the use of steelwool fiber for composite materials, on the basis of the physical properties, that generate conditions of mixing with three binders （matrix） natural： the rosin, artificial hard： polyurethane resin and artificial flexible： flexible twin resin （epoxy） and finally a polyester resin to make a comparison with other major resins. A testing of compression and tension is carried out to the materials analyzed, obtaining three types of composite materials by the above mentioned binders and three proposed presentations of fiber （complete, tissue and ground）. The test tube in tension with polyester resin presented a high rigidity and a percentage of deformation of 14%, resulting in less distortion than the woven with resin polyurethane with 12% of deformation. The presentation with resin polyurethane presented greater resistance to compression, because the resin acts as a sponge absorbing the energy of charge and the join of particles is larger than the other presentations generating greater cohesion among them and avoiding its rupture easily for a load of 2,000 kg. The presentation that is least resisted was the woven in two resins in the stage of energy absorption of load where polyurethane is 800 kg and the flexible twin is 850 kg, because the form of woven fiber distribution creates spaces where there are more resin than fiber.展开更多
The kinetics of water absorption in water-borne anticorrosive urethane/epoxy coatings, which were actually introduced in the industrial field, are studied. It is found that the high water affinity of a water-borne coa...The kinetics of water absorption in water-borne anticorrosive urethane/epoxy coatings, which were actually introduced in the industrial field, are studied. It is found that the high water affinity of a water-borne coating supports a higher saturated water content, Mχ, and helps to facilitate absorption D. The three parameters of stretched exponential function called the William-Watt equation, Eo, τ, and β, are determined to fit the degraded stress relaxation behavior in the water absorption process because this function quantitatively describes the relaxing ability and has been successfully used by a number of researchers. An increasing in the water content is shown to correlate strongly with a decrease in Eo and fl early in the absorption process between Mt/M（χ） = 0 and Mt/Mχ≈ 0.5. The adhesive characteristics of the coatings are correlated with water content, and shown to exhibit higher cohesive failure in coating epoxies under saturated conditions. This suggests that water interferes with the intermolecular bonding between polymer chains which degrades the bulk materials ability to diffuse stress concentrations and reduces its overall strength.展开更多
Water-dispersed polyurethane (PU) adhesive is a novel and highly efficient adhesive with broad application potential. In this study, the key parameters affecting the synthesis and application of this adhesive were exa...Water-dispersed polyurethane (PU) adhesive is a novel and highly efficient adhesive with broad application potential. In this study, the key parameters affecting the synthesis and application of this adhesive were examined, and optimal conditions were identified. The water-dispersed PU adhesive was successfully synthesized, and applied in the fastness test of pigment printing on cotton fabric. The data demonstrated that all the fastnesses of PU adhesive were better than that of the conventional PA one.展开更多
文摘This paper studies the structure and properties of the polycarbonate polyurethane epoxy resin (PCPU EP) blends being resistant to hydrolysis.The samples were analyzed by an infrared spectrometer,a differential scanning calorimeter,a scanning electron microscope and a dynamic viscoelastometer.The results show that PCPU EP blends have excellent resistance to hydrolysis and mechanical properties at the ratio of PCPU to EP equal to 10/100 (wt/wt).
文摘UV-curable polyurethane prepolymer and photoinitiator 1173 were facilely encapsulated in a poly（urea-formaldehyde） shell, which was in situ formed by the polymerization of formalde-hyde and urea in an oil-in-water emulsion. The diameters of the microcapsules ranged from 118 μm to 663 μm depending on agitation speed, and were obtained via optical mi-croscopy and scanning electron microscopy analyses. The encapsulation percent and the yield of microcapsules prepared at the agitation speed of 600 r/min can reach 97.52wt% and 65.23wt%, respectively. When the water-borne polyurethane （WPU） coating embedded with the prepared microcapsules were scratched, the healing agent could be released from rup-tured microcapsules and lled the scribed region. The excellent anticorrosion properties of the WPU coating embedded with the prepared microcapsules were con rmed by the results obtained from both electrochemical impedance spectroscopy and Tafel curves.
文摘A series of Polyurethane (PU)/bisphenol A based Epoxy Resin(EP) Interpenetrating Polymer Networks(IPN) were synthesized and characterized by SEM, DSC, TGA and DMTA. It was found that IPN shows the best compatibility and damping properties when the ratio of PU/EP is 80 to 20. The results show that chain-extender and higher molecular weight of PPG are able to improve the properties of compatibility, damping and thermal properties.
文摘In a changing world with a high interest in new ecomaterials, natural fibers such as the steelwool or Luffa cylindriea appear in new presentations and mixing with other materials to develop better opportunities to replace synthetic fibers. This work presents a research on the use of steelwool fiber for composite materials, on the basis of the physical properties, that generate conditions of mixing with three binders （matrix） natural： the rosin, artificial hard： polyurethane resin and artificial flexible： flexible twin resin （epoxy） and finally a polyester resin to make a comparison with other major resins. A testing of compression and tension is carried out to the materials analyzed, obtaining three types of composite materials by the above mentioned binders and three proposed presentations of fiber （complete, tissue and ground）. The test tube in tension with polyester resin presented a high rigidity and a percentage of deformation of 14%, resulting in less distortion than the woven with resin polyurethane with 12% of deformation. The presentation with resin polyurethane presented greater resistance to compression, because the resin acts as a sponge absorbing the energy of charge and the join of particles is larger than the other presentations generating greater cohesion among them and avoiding its rupture easily for a load of 2,000 kg. The presentation that is least resisted was the woven in two resins in the stage of energy absorption of load where polyurethane is 800 kg and the flexible twin is 850 kg, because the form of woven fiber distribution creates spaces where there are more resin than fiber.
文摘The kinetics of water absorption in water-borne anticorrosive urethane/epoxy coatings, which were actually introduced in the industrial field, are studied. It is found that the high water affinity of a water-borne coating supports a higher saturated water content, Mχ, and helps to facilitate absorption D. The three parameters of stretched exponential function called the William-Watt equation, Eo, τ, and β, are determined to fit the degraded stress relaxation behavior in the water absorption process because this function quantitatively describes the relaxing ability and has been successfully used by a number of researchers. An increasing in the water content is shown to correlate strongly with a decrease in Eo and fl early in the absorption process between Mt/M（χ） = 0 and Mt/Mχ≈ 0.5. The adhesive characteristics of the coatings are correlated with water content, and shown to exhibit higher cohesive failure in coating epoxies under saturated conditions. This suggests that water interferes with the intermolecular bonding between polymer chains which degrades the bulk materials ability to diffuse stress concentrations and reduces its overall strength.
文摘Water-dispersed polyurethane (PU) adhesive is a novel and highly efficient adhesive with broad application potential. In this study, the key parameters affecting the synthesis and application of this adhesive were examined, and optimal conditions were identified. The water-dispersed PU adhesive was successfully synthesized, and applied in the fastness test of pigment printing on cotton fabric. The data demonstrated that all the fastnesses of PU adhesive were better than that of the conventional PA one.
