通过水热碳化成球及后续热解反应从过期复方阿胶浆中提取得到了硬碳材料,并研究了其微观形貌、元素组成、结构和储钠性能。结果表明,所得到的碳材料呈现平均直径约为4.3μm的光滑微球形貌,氮/硫元素均匀地分布在碳微球中且石墨化程度较...通过水热碳化成球及后续热解反应从过期复方阿胶浆中提取得到了硬碳材料,并研究了其微观形貌、元素组成、结构和储钠性能。结果表明,所得到的碳材料呈现平均直径约为4.3μm的光滑微球形貌,氮/硫元素均匀地分布在碳微球中且石墨化程度较低;在0.5和1.0 A/g各循环500圈时,碳微球负极的可逆放电比容量分别稳定在225和180 m Ah/g,即使在高达2.0 A/g的电流密度循环1000圈时,放电比容量仍维持在108 m Ah/g,表现了良好的高倍率循环储钠稳定性。无疑,该结果有助于推进过期废药的循环经济模式和绿色能源的发展。展开更多
Proton exchange membrane fuel cells suffer from the sluggish kinetics of the oxygen reduction reaction(ORR)and the high cost of Pt catalysts.In the present work,a high‐performance ORR catalystbased on Fe,N,S‐doped p...Proton exchange membrane fuel cells suffer from the sluggish kinetics of the oxygen reduction reaction(ORR)and the high cost of Pt catalysts.In the present work,a high‐performance ORR catalystbased on Fe,N,S‐doped porous carbon(FeNS‐PC)was synthesized using melamine formaldehyderesin as C and N precursors,Fe(SCN)3as Fe and S precursors,and CaCl2as a template via a two‐stepheat treatment without a harsh template removal step.The results show that the catalyst treated at900℃(FeNS‐PC‐900)had a high surface area of775m2/g,a high mass activity of10.2A/g in anacidic medium,and excellent durability;the half‐wave potential decreased by only20mV after10000potential cycles.The FeNS‐PC‐900catalyst was used as the cathode in a proton exchangemembrane fuel cell and delivered a peak power density of0.49W/cm2.FeNS‐PC‐900therefore hasgood potential for use in practical applications.展开更多
Ultrathin small MoS2nanosheets exhibit a higher electrocatalytic activity for the hydrogen evolution reaction.However,strong interactions between MoS2layers may result in aggregation;together with the low conductivity...Ultrathin small MoS2nanosheets exhibit a higher electrocatalytic activity for the hydrogen evolution reaction.However,strong interactions between MoS2layers may result in aggregation;together with the low conductivity of MoS2,this may lower its electrocatalytic activity.In this paper we present a method that we developed to directly produce solid S,N co‐doped carbon(SNC)with a graphite structure and multiple surface groups through a hydrothermal route.When Na2MoO4was added to the reaction,polymolybdate could be anchored into the carbon materials via a chemical interaction that helps polymolybdate disperse uniformly into the SNC.After a high temperature treatment,polymolybdate transformed into MoS2at800°C for6h in a N2atmosphere at a heating rate of5°C/min,owing to S2?being released from the SNC during the treatment(denoted as MoS2/SNC‐800‐6h).The SNC effectively prevents MoS2from aggregating into large particles,and we successfully prepared highly dispersed MoS2in the SNC matrix.Electrochemical characterizations indicate that MoS2/SNC‐900‐12h exhibits a low onset potential of115mV and a low overpotential of237mV at a current density of10mA/cm2.Furthermore,MoS2/SNC‐900‐12h also had an excellent stability with only^2.6%decay at a current density of10mA/cm2after5000test cycles.展开更多
The N,S co-doped porous carbon nanofibers were fabricated by the carbonization of[Zn_(2)(tdc)_(2)(MA)]n MOFs/polyacrylonitrile nanofibers composite,which was produced by the electrospinning technology.The electrochemi...The N,S co-doped porous carbon nanofibers were fabricated by the carbonization of[Zn_(2)(tdc)_(2)(MA)]n MOFs/polyacrylonitrile nanofibers composite,which was produced by the electrospinning technology.The electrochemical results show that the N,S co-doped porous carbon nanofibers can achieve capacity of 201.2 mAh·g^(-1)at the current density of 0.05 A·g^(-1).Furthermore,the reversible capacity still has 161.3 mAh·g^(-1)even at a high current density of 1 A·g^(-1)after 600 cycles.The superior electrochemical performance shows that the N,S co-doped porous carbon nanofibers electrode material can be used as an ideal anode material for sodium-ion batteries.展开更多
文摘通过水热碳化成球及后续热解反应从过期复方阿胶浆中提取得到了硬碳材料,并研究了其微观形貌、元素组成、结构和储钠性能。结果表明,所得到的碳材料呈现平均直径约为4.3μm的光滑微球形貌,氮/硫元素均匀地分布在碳微球中且石墨化程度较低;在0.5和1.0 A/g各循环500圈时,碳微球负极的可逆放电比容量分别稳定在225和180 m Ah/g,即使在高达2.0 A/g的电流密度循环1000圈时,放电比容量仍维持在108 m Ah/g,表现了良好的高倍率循环储钠稳定性。无疑,该结果有助于推进过期废药的循环经济模式和绿色能源的发展。
基金supported by the National Basic Research Program of China (973 Program,2015CB932303)the National Natural Science Founda-tion of China (21373175,21621091)~~
文摘Proton exchange membrane fuel cells suffer from the sluggish kinetics of the oxygen reduction reaction(ORR)and the high cost of Pt catalysts.In the present work,a high‐performance ORR catalystbased on Fe,N,S‐doped porous carbon(FeNS‐PC)was synthesized using melamine formaldehyderesin as C and N precursors,Fe(SCN)3as Fe and S precursors,and CaCl2as a template via a two‐stepheat treatment without a harsh template removal step.The results show that the catalyst treated at900℃(FeNS‐PC‐900)had a high surface area of775m2/g,a high mass activity of10.2A/g in anacidic medium,and excellent durability;the half‐wave potential decreased by only20mV after10000potential cycles.The FeNS‐PC‐900catalyst was used as the cathode in a proton exchangemembrane fuel cell and delivered a peak power density of0.49W/cm2.FeNS‐PC‐900therefore hasgood potential for use in practical applications.
基金supported by the National Natural Science Foundation of China(21671011)Beijing High-Level Talent program~~
文摘Ultrathin small MoS2nanosheets exhibit a higher electrocatalytic activity for the hydrogen evolution reaction.However,strong interactions between MoS2layers may result in aggregation;together with the low conductivity of MoS2,this may lower its electrocatalytic activity.In this paper we present a method that we developed to directly produce solid S,N co‐doped carbon(SNC)with a graphite structure and multiple surface groups through a hydrothermal route.When Na2MoO4was added to the reaction,polymolybdate could be anchored into the carbon materials via a chemical interaction that helps polymolybdate disperse uniformly into the SNC.After a high temperature treatment,polymolybdate transformed into MoS2at800°C for6h in a N2atmosphere at a heating rate of5°C/min,owing to S2?being released from the SNC during the treatment(denoted as MoS2/SNC‐800‐6h).The SNC effectively prevents MoS2from aggregating into large particles,and we successfully prepared highly dispersed MoS2in the SNC matrix.Electrochemical characterizations indicate that MoS2/SNC‐900‐12h exhibits a low onset potential of115mV and a low overpotential of237mV at a current density of10mA/cm2.Furthermore,MoS2/SNC‐900‐12h also had an excellent stability with only^2.6%decay at a current density of10mA/cm2after5000test cycles.
文摘The N,S co-doped porous carbon nanofibers were fabricated by the carbonization of[Zn_(2)(tdc)_(2)(MA)]n MOFs/polyacrylonitrile nanofibers composite,which was produced by the electrospinning technology.The electrochemical results show that the N,S co-doped porous carbon nanofibers can achieve capacity of 201.2 mAh·g^(-1)at the current density of 0.05 A·g^(-1).Furthermore,the reversible capacity still has 161.3 mAh·g^(-1)even at a high current density of 1 A·g^(-1)after 600 cycles.The superior electrochemical performance shows that the N,S co-doped porous carbon nanofibers electrode material can be used as an ideal anode material for sodium-ion batteries.
