Vapor-liquid equilibria for water+hydrochloric acid+magnesium chloride and water+hydrochloric acid+calcium chloride systems at atmospheric pressure were measured using a Othmer-type equilibrium still. The experimental...Vapor-liquid equilibria for water+hydrochloric acid+magnesium chloride and water+hydrochloric acid+calcium chloride systems at atmospheric pressure were measured using a Othmer-type equilibrium still. The experimental data are correlated using a modified Meissner’s method. Satisfactory agreements are obtained between the experimental and the calculated results.展开更多
Weight lost method was used to comparatively study the corrosion behavior of four different metals under the dosage of chlorine dioxide, chlorine and their mixture respectively. The experimental results indicated that...Weight lost method was used to comparatively study the corrosion behavior of four different metals under the dosage of chlorine dioxide, chlorine and their mixture respectively. The experimental results indicated that chlorine causes the most serious corrosion of carbon steel, and the higher the concentration of chlorine, the more serious the corrosion. On the contrary, metals corrosion is the least serious in the case of chlorine dioxide. The results further revealed that chlorine dioxide is the most effective water treatment reagent, making it the best choice to use extensively in circulated cooling water disinfection and corrosion control.展开更多
The rejection properties of a nanofiltration organic membrane were investigated using KCI solutions, NaC1 solutions, NaC1/benzyl alcohol hybrid solutions and KCl/benzyl alcohol hybrid solutions. The presence of benzyl...The rejection properties of a nanofiltration organic membrane were investigated using KCI solutions, NaC1 solutions, NaC1/benzyl alcohol hybrid solutions and KCl/benzyl alcohol hybrid solutions. The presence of benzyl alcohol （3.7 mol · m-3） caused a decrease in electrolyte rejection within the range of 0 to 6%. The mechanism of the decrease was discussed. The cation-n bond was assumed to form in the hybrid solution and to further induce the partial dehydration of the cation. The steric and charge density inhibition of the salt activity was strengthened, and the salt rejection was thus decreased. A simulation was performed to evaluate the radius of the cation. 2015 The Chemical Industry and Engineering Society of China, and Chemical Industry Press. All rights reserved.展开更多
The mixing phenomena of a two-layer density-stratified fluid induced by a jet in a tank are experimentally investigated. The upper and lower fluids are water and a NaCl-water solution, respectively, with the lower flu...The mixing phenomena of a two-layer density-stratified fluid induced by a jet in a tank are experimentally investigated. The upper and lower fluids are water and a NaCl-water solution, respectively, with the lower fluid issued vertically upward from a nozzle at the bottom of the tank. The jet Reynolds number Re, defined by the jet velocity and the water kinematic viscosity, ranges from 90 to 4,200. The mass concentration of the NaCl-water solution Co is less than 0.08. The flow visualization makes clear the jet behavior relative to the density interface between the upper and lower fluids. The measurement of the concentration distribution of the water paint issued with the jet highlights the effects of Re and Co on the mixing between the jet and the ambient fluid. The measurement of the fluid velocity distribution with a PIV （particle image velocimetry） system successfully elucidates the relationship between the velocity field and the resultant mixing.展开更多
To solve the inherent disadvantages in conventional processes for electrodeposition of zinc, it＇s necessary to develop more high-efficiency and environmentally friendly electrolytes. In this work, it was found that t...To solve the inherent disadvantages in conventional processes for electrodeposition of zinc, it＇s necessary to develop more high-efficiency and environmentally friendly electrolytes. In this work, it was found that the dissolution of ZnO was remarka- bly enhanced in some imidazolium chloride by the addition of urea, and the solubility of ZnO in 1：1 [Amim]C1/urea mixture was as high as 8.35 wt% at 373.2 K. Electrochemical measurements showed that zinc could be readily electrodeposited from the solutions of ZnO. Bright, dense and well adherent zinc coatings with good purity were obtained from 0.6 M solution of ZnO in 1：1 [Amim]C1/urea at 323.2-343.2 K. It＇s expected that the solutions of ZnO in imidazolium chloride/urea mixtures have the potential to replace the traditional electrolytes, especially toxic zinc chloride-based ones for zinc electroplating, as well as preparation of zinc materials.展开更多
文摘Vapor-liquid equilibria for water+hydrochloric acid+magnesium chloride and water+hydrochloric acid+calcium chloride systems at atmospheric pressure were measured using a Othmer-type equilibrium still. The experimental data are correlated using a modified Meissner’s method. Satisfactory agreements are obtained between the experimental and the calculated results.
文摘Weight lost method was used to comparatively study the corrosion behavior of four different metals under the dosage of chlorine dioxide, chlorine and their mixture respectively. The experimental results indicated that chlorine causes the most serious corrosion of carbon steel, and the higher the concentration of chlorine, the more serious the corrosion. On the contrary, metals corrosion is the least serious in the case of chlorine dioxide. The results further revealed that chlorine dioxide is the most effective water treatment reagent, making it the best choice to use extensively in circulated cooling water disinfection and corrosion control.
文摘The rejection properties of a nanofiltration organic membrane were investigated using KCI solutions, NaC1 solutions, NaC1/benzyl alcohol hybrid solutions and KCl/benzyl alcohol hybrid solutions. The presence of benzyl alcohol （3.7 mol · m-3） caused a decrease in electrolyte rejection within the range of 0 to 6%. The mechanism of the decrease was discussed. The cation-n bond was assumed to form in the hybrid solution and to further induce the partial dehydration of the cation. The steric and charge density inhibition of the salt activity was strengthened, and the salt rejection was thus decreased. A simulation was performed to evaluate the radius of the cation. 2015 The Chemical Industry and Engineering Society of China, and Chemical Industry Press. All rights reserved.
文摘The mixing phenomena of a two-layer density-stratified fluid induced by a jet in a tank are experimentally investigated. The upper and lower fluids are water and a NaCl-water solution, respectively, with the lower fluid issued vertically upward from a nozzle at the bottom of the tank. The jet Reynolds number Re, defined by the jet velocity and the water kinematic viscosity, ranges from 90 to 4,200. The mass concentration of the NaCl-water solution Co is less than 0.08. The flow visualization makes clear the jet behavior relative to the density interface between the upper and lower fluids. The measurement of the concentration distribution of the water paint issued with the jet highlights the effects of Re and Co on the mixing between the jet and the ambient fluid. The measurement of the fluid velocity distribution with a PIV （particle image velocimetry） system successfully elucidates the relationship between the velocity field and the resultant mixing.
基金supported financially by the National Basic Research Program of China (2009CB219901)National Key Technology Research and Development Program of the Ministry of Science and Technology of China(2012BAF03B01)+1 种基金the National Natural Science Foundation of China(20906096)Open-end Fund of State Key Laboratory of Multiphase Complex Systems (MPCS-2011-D-06)
文摘To solve the inherent disadvantages in conventional processes for electrodeposition of zinc, it＇s necessary to develop more high-efficiency and environmentally friendly electrolytes. In this work, it was found that the dissolution of ZnO was remarka- bly enhanced in some imidazolium chloride by the addition of urea, and the solubility of ZnO in 1：1 [Amim]C1/urea mixture was as high as 8.35 wt% at 373.2 K. Electrochemical measurements showed that zinc could be readily electrodeposited from the solutions of ZnO. Bright, dense and well adherent zinc coatings with good purity were obtained from 0.6 M solution of ZnO in 1：1 [Amim]C1/urea at 323.2-343.2 K. It＇s expected that the solutions of ZnO in imidazolium chloride/urea mixtures have the potential to replace the traditional electrolytes, especially toxic zinc chloride-based ones for zinc electroplating, as well as preparation of zinc materials.
