In order to obtain solubility data of propylene in 2-butanol+water solutions, gas-liquid equilibrium(GLE) experiment was carried out at 303.15--333.15 K, 0.3-1.2 MPa with static equilibrium still. Original mass ratios...In order to obtain solubility data of propylene in 2-butanol+water solutions, gas-liquid equilibrium(GLE) experiment was carried out at 303.15--333.15 K, 0.3-1.2 MPa with static equilibrium still. Original mass ratios of 2-butanol to water are 1:0，9:1,8:2 and 7:3, respectively. The equilibrium data are correlated with an empirical correlation. The average relative deviation (ARD) between experimental and calculated values is 2.15%,and the maximum relative deviation (MRD) is less than 5%.展开更多
Liquid-liquid equilibrium (LLE) data for the ternary systemwater-ethanol-dimethyl succinate have been determined experimentallyat temperatures ranging from 298.15 to 318.15 K at 5 K intervals.Complete phase diagrams w...Liquid-liquid equilibrium (LLE) data for the ternary systemwater-ethanol-dimethyl succinate have been determined experimentallyat temperatures ranging from 298.15 to 318.15 K at 5 K intervals.Complete phase diagrams were obtained by determining solubility andthe tie-line data. Tie-line compositions were correlated byOthmer-Tobias method. The universal quasichemical functional groupactivity coefficient (UNIFAC) and modified UNIFAC methods were usedto predict the phase equilibrium in the system using the interactionparameters deter- Mined from experimental data between groups CH_3,CH_2, OH, CH_3 COO and H_2O.展开更多
Density （ρ） and viscosity （η） measurements were carried out for 4-aminobutyric acid in 0.0041,0.0125 and 0.0207 mol·L-1 aqueous salbutamol sulphate at T=308.15,313.15 and 318.15K.The measured values of dens...Density （ρ） and viscosity （η） measurements were carried out for 4-aminobutyric acid in 0.0041,0.0125 and 0.0207 mol·L-1 aqueous salbutamol sulphate at T=308.15,313.15 and 318.15K.The measured values of density and viscosity were used to estimate some important parameters such as apparent molar volume Vφ,limiting apparent molar volume Vφ0,transfer volume △Vφ0,hydration number Hn,second derivative of infinite dilution of partial molar volume with temperature 2Vφ0/T2,viscosity B-coefficients,variation of B with temperature dB/dT,free energy of activation per mole of solvent △μ10＊ and solute △μ20＊,activation entropy △S20＊ and activation enthalpy △H20＊ of the amino acids.These parameters have been interpreted in terms of solute-solute and solute-solvent interactions and structure making/breaking ability of solutes in the given solution.展开更多
As a new kind of2D nanomaterials, graphene oxide （GO） with 2-4 layers was fabricated rio a modified Hummers method and used for the preparation ofpervaporation （PV） membranes. Such GO membranes were prepared via a...As a new kind of2D nanomaterials, graphene oxide （GO） with 2-4 layers was fabricated rio a modified Hummers method and used for the preparation ofpervaporation （PV） membranes. Such GO membranes were prepared via a facile vacuum-assisted method on anodic aluminium oxide disks and applied for the dehydration of butanol. To obtain GO membranes with high performance, effects of pre-treatments, including high-speed centrifugal treat- ment of GO dispersion and thermal treatment of GO membranes, were investigated. In addition, effects of operation conditions on the performance of GO membranes in the PV process and the stability of GO membranes were also studied. It is of benefit to improve the selectivity of GO membrane by pre-treatment that centrifuges the GO dispersion with 10000 r· min^- 1 for 40 min, which could purify the GO dispersion by removing the large size GO sheets. As prepared GO membrane showed high separation performance for the butanol/water system. The separation factor was 230, and the permeability was as high as 3.1 kg·m^- 2·h^-1 when the PV temperature was 50 ℃ and the water content in feed was 10% （by mass）. Meanwhile, the membrane still showed good stability for the dehydration of butanol after running for 1800 min in the PV process. GO membranes are suitable candidates for butanol dehydration via PV process.展开更多
Experiments were carried out to investigate the influences of cation from electrolytes and acidity/alkalinity on the phase behavior of sodium dodecyl sulfate-n-butanol-organics-water （with electrolytes） microemulsio...Experiments were carried out to investigate the influences of cation from electrolytes and acidity/alkalinity on the phase behavior of sodium dodecyl sulfate-n-butanol-organics-water （with electrolytes） microemulsion sys-tem. The organics used is commercial kerosene. The volume ratio of water to organics is 1︰1. The results show that the type and valence of electrolyte cations are important factors influencing the microemulsion behavior. Biva-lent Ca2＋is more effective than monovalent K＋and Na＋for the formation of Winsor type III and II microemulsion. For electrolytes with the same monovalent cation Na＋, i.e. NaCl and Na2CO3, anions in the electrolyte have some effect. Bivalent anion 23CO - leads to a lower activity of cation Na＋than monovalent anion Cl-. NaOH （or KOH） behaves similar with NaCl （or KCl）. When HCl is used as electrolyte, its acidity plays an important role. Phase in-version of microemulsion from type III （or II） to type I is observed through precipitation of Ca2＋using Na2CO3, neutralization of HCl by NaOH, and addition of water to the system, which releases the oil from the microemulsion.展开更多
Pervaporation has attracted considerable interest owing to its potential application in recovering biobutanol from biomass acetone-butanol-ethanol (ABE) fermentation broth. In this study, butanol was recovered from it...Pervaporation has attracted considerable interest owing to its potential application in recovering biobutanol from biomass acetone-butanol-ethanol (ABE) fermentation broth. In this study, butanol was recovered from its aqueous solution using a polydimethylsiloxane (PDMS)/ceramic composite pervaporation membrane. The effects of operating temperature, feed concentration, feed flow rate and operating time on the membrane pervaporation performance were investigated. It was found that with the increase of temperature or butanol concentration in the feed, the total flux through the membrane increased while the separation factor decreased slightly. As the feed flow rate increased, the total flux increased gradually while the separation factor changed little. At 40°C and 1% (by mass) butanol in the feed, the total flux and separation factor of the membrane reached 457.4 g·m?2·h?1 and 26.1, respectively. The membrane with high flux is suitable for recovering butanol from ABE fermentation broth.展开更多
Three ionic liquids(ILs),1-ethyl-3-methylimidazolium bromine([EMIM]Br),1-butyl-3-methylimidazolium bromine([BMIM]Br),and 1-hexyl-3-methylimidazolium bromine([HMIM]Br),were used as the solvent for separation of {tert-b...Three ionic liquids(ILs),1-ethyl-3-methylimidazolium bromine([EMIM]Br),1-butyl-3-methylimidazolium bromine([BMIM]Br),and 1-hexyl-3-methylimidazolium bromine([HMIM]Br),were used as the solvent for separation of {tert-butyl alcohol(TBA)+ water} azeotrope.Vapor–liquid equilibrium(VLE)data for {TBA + water + IL}ternary systems were measured at 101.3 k Pa.The results indicate that all the three ILs produce an obvious effect on the VLE behavior of {TBA + water} system and eliminate the azeotropy in the whole concentration range.[EMIM]Br is the best solvent for the separation of {TBA + water} system by extractive distillation among the three ILs.The experimental VLE data for the ternary systems are correlated with the NRTL model equation with good correlations.Explanations are given with activity coefficients of water and TBA,and the experimental VLE-temperature data for {TBA or water + IL} binary systems.展开更多
Transesterification between methyl-butyrate and 1-butanol in nonaqueous systems was catalyzed by porcine pancreatic lipase which was immobilized on cross- linked polystyrene. Organic solvents, substrate concentration,...Transesterification between methyl-butyrate and 1-butanol in nonaqueous systems was catalyzed by porcine pancreatic lipase which was immobilized on cross- linked polystyrene. Organic solvents, substrate concentration, contents of water and other parameters which affect the immobilized enzyme activity were studied. Lipase immobilized on hydrophobic crosslinked polystyrene can reduce its diffusion limit in the reaction. It was found that the activity of immobilized lipase in organic systems was two times as high as that of free lipase.展开更多
Nano CuO/ZSM-5 zeolite was prepared and used as a catalyst for dehydration of 1,4-butanediol(BDO) to tetrahydrofuran(THF) in liquid-phase. It was found that the 4.6 wt% CuO/ZSM-5 displayed good catalytic performance, ...Nano CuO/ZSM-5 zeolite was prepared and used as a catalyst for dehydration of 1,4-butanediol(BDO) to tetrahydrofuran(THF) in liquid-phase. It was found that the 4.6 wt% CuO/ZSM-5 displayed good catalytic performance, and nearly 100%of BDO conversion and more than 99% of THF selectivity could be achieved by a rotary evaporator reactor at 170 °C under the atmospheric pressure. With such mild reaction conditions, 2400 g BDO could be converted to THF over 1 g catalyst under semi-continuous operation. Characterizations with X-ray diffraction(XRD), temperature-programmed reduction(TPR),NH3-temperature programmed desorption(TPD), X-ray photoelectron spectroscopy(XPS), transmission electron microscope(TEM) and Brunauer-Emmett-Teller(BET) over fresh and used 4.6 wt% CuO/ZSM-5 were conducted. Based on the results of the characterization and catalytic performance of 4.6 wt% CuO/ZSM-5, it can be conjectured that the formed 1–3 nm CuO nanoparticles, suitable acidity of the catalyst due to the synergic interaction of CuO and ZSM-5 support promoted the dehydration of BDO to THF.展开更多
基金Supported by the National Fundamental Research Development Program of China (G2000048005) and the State Key Laboratories of Chemical Engineering, China (0047).
文摘In order to obtain solubility data of propylene in 2-butanol+water solutions, gas-liquid equilibrium(GLE) experiment was carried out at 303.15--333.15 K, 0.3-1.2 MPa with static equilibrium still. Original mass ratios of 2-butanol to water are 1:0，9:1,8:2 and 7:3, respectively. The equilibrium data are correlated with an empirical correlation. The average relative deviation (ARD) between experimental and calculated values is 2.15%,and the maximum relative deviation (MRD) is less than 5%.
文摘Liquid-liquid equilibrium (LLE) data for the ternary systemwater-ethanol-dimethyl succinate have been determined experimentallyat temperatures ranging from 298.15 to 318.15 K at 5 K intervals.Complete phase diagrams were obtained by determining solubility andthe tie-line data. Tie-line compositions were correlated byOthmer-Tobias method. The universal quasichemical functional groupactivity coefficient (UNIFAC) and modified UNIFAC methods were usedto predict the phase equilibrium in the system using the interactionparameters deter- Mined from experimental data between groups CH_3,CH_2, OH, CH_3 COO and H_2O.
文摘Density （ρ） and viscosity （η） measurements were carried out for 4-aminobutyric acid in 0.0041,0.0125 and 0.0207 mol·L-1 aqueous salbutamol sulphate at T=308.15,313.15 and 318.15K.The measured values of density and viscosity were used to estimate some important parameters such as apparent molar volume Vφ,limiting apparent molar volume Vφ0,transfer volume △Vφ0,hydration number Hn,second derivative of infinite dilution of partial molar volume with temperature 2Vφ0/T2,viscosity B-coefficients,variation of B with temperature dB/dT,free energy of activation per mole of solvent △μ10＊ and solute △μ20＊,activation entropy △S20＊ and activation enthalpy △H20＊ of the amino acids.These parameters have been interpreted in terms of solute-solute and solute-solvent interactions and structure making/breaking ability of solutes in the given solution.
基金Supported by the National High Technical Research Program of China(2012AA03A606)the Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(12KJA530001)the Innovative Research Team Program by the Ministry of Education of China(IRT13070)
文摘As a new kind of2D nanomaterials, graphene oxide （GO） with 2-4 layers was fabricated rio a modified Hummers method and used for the preparation ofpervaporation （PV） membranes. Such GO membranes were prepared via a facile vacuum-assisted method on anodic aluminium oxide disks and applied for the dehydration of butanol. To obtain GO membranes with high performance, effects of pre-treatments, including high-speed centrifugal treat- ment of GO dispersion and thermal treatment of GO membranes, were investigated. In addition, effects of operation conditions on the performance of GO membranes in the PV process and the stability of GO membranes were also studied. It is of benefit to improve the selectivity of GO membrane by pre-treatment that centrifuges the GO dispersion with 10000 r· min^- 1 for 40 min, which could purify the GO dispersion by removing the large size GO sheets. As prepared GO membrane showed high separation performance for the butanol/water system. The separation factor was 230, and the permeability was as high as 3.1 kg·m^- 2·h^-1 when the PV temperature was 50 ℃ and the water content in feed was 10% （by mass）. Meanwhile, the membrane still showed good stability for the dehydration of butanol after running for 1800 min in the PV process. GO membranes are suitable candidates for butanol dehydration via PV process.
基金Supported by the National Natural Science Foundation of China(21106187)Promotive Research Funds for Excellent Young and Middle-aged Scientists of Shandong Province(BS2011NJ021)+1 种基金the Fundamental Research Funds for the Central Universities(11CX05016A)the Graduate Innovation Project of CUP 2012(CX-1214)
文摘Experiments were carried out to investigate the influences of cation from electrolytes and acidity/alkalinity on the phase behavior of sodium dodecyl sulfate-n-butanol-organics-water （with electrolytes） microemulsion sys-tem. The organics used is commercial kerosene. The volume ratio of water to organics is 1︰1. The results show that the type and valence of electrolyte cations are important factors influencing the microemulsion behavior. Biva-lent Ca2＋is more effective than monovalent K＋and Na＋for the formation of Winsor type III and II microemulsion. For electrolytes with the same monovalent cation Na＋, i.e. NaCl and Na2CO3, anions in the electrolyte have some effect. Bivalent anion 23CO - leads to a lower activity of cation Na＋than monovalent anion Cl-. NaOH （or KOH） behaves similar with NaCl （or KCl）. When HCl is used as electrolyte, its acidity plays an important role. Phase in-version of microemulsion from type III （or II） to type I is observed through precipitation of Ca2＋using Na2CO3, neutralization of HCl by NaOH, and addition of water to the system, which releases the oil from the microemulsion.
基金Supported by the National Basic Research Program of China（2009CB623406） the National Natural Science Foundation of China（20990222）+1 种基金 the Natural Science Foundation of Jiangsu Province（SBK200930313） the“Six Kinds of Important Talents”Program of Jiangsu Province（2007007）
文摘Pervaporation has attracted considerable interest owing to its potential application in recovering biobutanol from biomass acetone-butanol-ethanol (ABE) fermentation broth. In this study, butanol was recovered from its aqueous solution using a polydimethylsiloxane (PDMS)/ceramic composite pervaporation membrane. The effects of operating temperature, feed concentration, feed flow rate and operating time on the membrane pervaporation performance were investigated. It was found that with the increase of temperature or butanol concentration in the feed, the total flux through the membrane increased while the separation factor decreased slightly. As the feed flow rate increased, the total flux increased gradually while the separation factor changed little. At 40°C and 1% (by mass) butanol in the feed, the total flux and separation factor of the membrane reached 457.4 g·m?2·h?1 and 26.1, respectively. The membrane with high flux is suitable for recovering butanol from ABE fermentation broth.
基金Supported by the National Natural Science Foundation of China(21076126)the Program for Liaoning Excellent Talents in University(2012013)the Liaoning Province Science Foundation of China(2014020140)
文摘Three ionic liquids(ILs),1-ethyl-3-methylimidazolium bromine([EMIM]Br),1-butyl-3-methylimidazolium bromine([BMIM]Br),and 1-hexyl-3-methylimidazolium bromine([HMIM]Br),were used as the solvent for separation of {tert-butyl alcohol(TBA)+ water} azeotrope.Vapor–liquid equilibrium(VLE)data for {TBA + water + IL}ternary systems were measured at 101.3 k Pa.The results indicate that all the three ILs produce an obvious effect on the VLE behavior of {TBA + water} system and eliminate the azeotropy in the whole concentration range.[EMIM]Br is the best solvent for the separation of {TBA + water} system by extractive distillation among the three ILs.The experimental VLE data for the ternary systems are correlated with the NRTL model equation with good correlations.Explanations are given with activity coefficients of water and TBA,and the experimental VLE-temperature data for {TBA or water + IL} binary systems.
文摘Transesterification between methyl-butyrate and 1-butanol in nonaqueous systems was catalyzed by porcine pancreatic lipase which was immobilized on cross- linked polystyrene. Organic solvents, substrate concentration, contents of water and other parameters which affect the immobilized enzyme activity were studied. Lipase immobilized on hydrophobic crosslinked polystyrene can reduce its diffusion limit in the reaction. It was found that the activity of immobilized lipase in organic systems was two times as high as that of free lipase.
基金supported by the National Natural Science Foundation of China(21173240)
文摘Nano CuO/ZSM-5 zeolite was prepared and used as a catalyst for dehydration of 1,4-butanediol(BDO) to tetrahydrofuran(THF) in liquid-phase. It was found that the 4.6 wt% CuO/ZSM-5 displayed good catalytic performance, and nearly 100%of BDO conversion and more than 99% of THF selectivity could be achieved by a rotary evaporator reactor at 170 °C under the atmospheric pressure. With such mild reaction conditions, 2400 g BDO could be converted to THF over 1 g catalyst under semi-continuous operation. Characterizations with X-ray diffraction(XRD), temperature-programmed reduction(TPR),NH3-temperature programmed desorption(TPD), X-ray photoelectron spectroscopy(XPS), transmission electron microscope(TEM) and Brunauer-Emmett-Teller(BET) over fresh and used 4.6 wt% CuO/ZSM-5 were conducted. Based on the results of the characterization and catalytic performance of 4.6 wt% CuO/ZSM-5, it can be conjectured that the formed 1–3 nm CuO nanoparticles, suitable acidity of the catalyst due to the synergic interaction of CuO and ZSM-5 support promoted the dehydration of BDO to THF.
