期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
澳大利亚荔枝龙眼采后处理最新趋势 被引量:2
1
作者 陈伟超 莫建军 《广西农学报》 2000年第2期63-63,共1页
关键词 澳大利亚 采后处理 荔枝龙眼 水冷处理 去梗机 广西农业 分级机 水冷 冷藏温度 次氯酸钠
下载PDF
焊接工艺对奥氏体不锈钢应力腐蚀行为的影响 被引量:4
2
作者 赵尔冰 张亦良 陈鴒志 《北京工业大学学报》 EI CAS CSCD 北大核心 2011年第11期1601-1606,1612,共7页
针对氯离子环境中奥氏体不锈钢焊缝较高的焊接残余应力极易引发应力腐蚀开裂的普遍性工程难题,对国产304、316L、德国304钢3种材料的不同焊接工艺进行了系列应力腐蚀实验研究.焊接工艺包括手工焊条电弧焊及CO2保护药芯电弧焊、焊后空冷... 针对氯离子环境中奥氏体不锈钢焊缝较高的焊接残余应力极易引发应力腐蚀开裂的普遍性工程难题,对国产304、316L、德国304钢3种材料的不同焊接工艺进行了系列应力腐蚀实验研究.焊接工艺包括手工焊条电弧焊及CO2保护药芯电弧焊、焊后空冷及浇水速冷,取样位置包括母材、焊缝起弧及收弧.通过100多个试样的应力腐蚀对比实验,研究了各种工艺之间的优劣,拟合了2种材料在沸腾氯化镁环境中应力-寿命的数学关系.结果表明,对应力腐蚀寿命而言,316 L是304钢的15倍以上、焊接起弧点高于收弧点、对接焊缝高于角焊缝;焊后速冷工艺可提高焊接接头抗应力腐蚀能力. 展开更多
关键词 奥氏体不锈钢 起弧 收弧 水冷处理 氯离子应力腐蚀
下载PDF
Study on metal corrosion caused by chlorine dioxide of various purities 被引量:2
3
作者 崔崇威 黄君礼 许晶 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2004年第6期593-596,共4页
Weight lost method was used to comparatively study the corrosion behavior of four different metals under the dosage of chlorine dioxide, chlorine and their mixture respectively. The experimental results indicated that... Weight lost method was used to comparatively study the corrosion behavior of four different metals under the dosage of chlorine dioxide, chlorine and their mixture respectively. The experimental results indicated that chlorine causes the most serious corrosion of carbon steel, and the higher the concentration of chlorine, the more serious the corrosion. On the contrary, metals corrosion is the least serious in the case of chlorine dioxide. The results further revealed that chlorine dioxide is the most effective water treatment reagent, making it the best choice to use extensively in circulated cooling water disinfection and corrosion control. 展开更多
关键词 chlorine dioxide CHLORINE mixture solution of chlorine dioxide and chlorine metal corrosion
下载PDF
Numerical Analysis of Doublet Wells for Cold Energy Storage on Heat Damage Treatment in Deep Mines 被引量:11
4
作者 HE Man-chao ZHANG Yi +1 位作者 GUO Dong-ming QIAN Zeng-zhen 《Journal of China University of Mining and Technology》 EI 2006年第3期278-282,共5页
Deep mining is an inevitable tendency in the development of coal industry. There are many heat damage problems with the increase of mining depth. The technology of using doublet wells, together with Heat Exchange Ma... Deep mining is an inevitable tendency in the development of coal industry. There are many heat damage problems with the increase of mining depth. The technology of using doublet wells, together with Heat Exchange Machine Systems (HEMSs), to store cold energy is a key to solve the heat damage problems in deep mines. Based on the geological conditions, thermodynamic and hydraulic parameters of Jiahe Mine, the isotherms in the period of cold energy storage and refrigeration and the volumes of cold water within different temperature ranges of the cold energy storage well were numerically analyzed. The results show that 1) with the same pumped and injected water volumes, the lower the temperature of injected water is, the larger the volume.of cold water in the cold energy storage well is. With the larger volume, the effect of cold energy storage is better. 2) the larger the volumes of pumped and reinjected water frigeration is better. And 3) without disturbance, the volume and temperature of cold water in the cold energy storage well can keep unchanged or have only a little change for a long time. Therefore the technology of doublet wells for cold energy storage is feasible and the cold energy storage aquifers can meet the requirement of the technology. 展开更多
关键词 deep mine heat damage treatment numerical simulation AQUIFER cold energy storage
下载PDF
A Novel Modeling, Simulation and Optimization Approach of Crude Oil Cold Stripping Process
5
作者 Kaveh Hezaveh Hesarmaskan HabibAle Ebrahim 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2013年第1期78-84,共7页
Cold stripping is the most common process for crude oil sweetening in oilfields particularly at offshore installations because of its low price and relatively easy operating conditions in comparison with other sweeten... Cold stripping is the most common process for crude oil sweetening in oilfields particularly at offshore installations because of its low price and relatively easy operating conditions in comparison with other sweetening processes. In this paper the cold stripping process in tray column has been modeled mathematically in static and dynamic modes, and solved with the MATLAB software. This process has been used in the existing treatment facilities of an offshore oil production complex for verifying the model results. With the help of HYSYS software the effective parameters on the process have been discussed and the optimized conditions finalized after some plant modifications for improving the performance of stripper columns have been proposed. 展开更多
关键词 MODELING simulation OPTIMIZATION sour crude oil cold stripping
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部