In this study,strontium adsorption from sulfuric acid solution by different Dowex 50W-X ion exchange resins was investigated.Among these resins,Dowex 50W-X8 resin showed the maximum sorption of strontium from the aque...In this study,strontium adsorption from sulfuric acid solution by different Dowex 50W-X ion exchange resins was investigated.Among these resins,Dowex 50W-X8 resin showed the maximum sorption of strontium from the aqueous solutions.The effect of pH,contact time,mass of resin,temperature,and concentration of interfering ions on strontium adsorption were evaluated to determine the optimum conditions of strontium sorption process.The kinetic models of sorption were analyzed using pseudo-first and pseudo-second order models.The results indicated that the pseudo-second order kinetic model was more appropriate than the other one.Moreover,the data obtained in this study were fitted into several sorption isotherm models and it was found that the Langmuir sorption isotherm shows the best fitting to the experimental data.展开更多
The non-tidal variation gained from continuous gravity observations in stations usually reflects the regional continuous gravity changes. In this paper we focus on studying the non-tidal variation of Baijiatuan statio...The non-tidal variation gained from continuous gravity observations in stations usually reflects the regional continuous gravity changes. In this paper we focus on studying the non-tidal variation of Baijiatuan station,Beijing where there are two different gravimeters( namely,L&R-804 and PET-031). Based on the original raw tidal records of two gravimeters from 2008 to 2011,we first remove various interference from raw data by the standard procedure software-Tsoft; then we model the solid earth tides, ocean tidal loading and pole tide through related parameters; after that we adopt a new segmented polynomial fitting method based on Tsoft to fit the complex drift of spring gravimeter; and finally we calculate the atmospheric loading effects by a linear regression model. After a series of processing we gain the non-tidal variation of the two gravimeters at Baijiatuan site,Beijing. Furthermore,to analyze the non-tidal variation preliminarily,we study the main component of related tidal data by power spectral density. Comparing the non-tidal variation of two different gravimeters,we find seasonal fluctuations in non-tidal results, which are in accordance with the water storage change. Therefore,we take into account the relevance of gravity changes and water storage based on the gravity data of GRACE and water data of the CMAP model from 2003 to 2011 at different sites in the Chinese mainland( Beijing, Chengdu, Shenyang and Shiquanhe), and make a preliminary analysis on the relationship between gravity changes and water storage.展开更多
Optimization of airfoil characteristics such as lift and drag is essential for high efficiency wind turbine blade design. In this research, effects of airfoil lift and drag on blade power coefficients were investigate...Optimization of airfoil characteristics such as lift and drag is essential for high efficiency wind turbine blade design. In this research, effects of airfoil lift and drag on blade power coefficients were investigated by using of wind turbine blade design software, PROPID. Firstly, a wind turbine blade of 2MW class was designed with DU-serics airfoils in the inner part and with aNACA series airfoil as a main airfoil in the outer part. Lift distribution was set to have near L/D maximum at each span station. Then, lift and drag curves were modified to observe effect of L/D variation. Drag and lift change with constant L/D on blade power coefficient was also studied for sensitivity investigation. Each case was optimized with Newtonian iteration incorporated in PROPID. High design lift coefficient results in less chord length and twist angle to maintain same aerodynamic load level. And, power coefficient wasn＇t improved much with high L/D. During the process, optimal inputs such as lift distribution, design lift and induction factors were suggested. As results, it was found that L/D maximization was important to obtain high efficiency. For the L/D maximization, lift maximization was important to minimize structural weight, but decreasing drag didn＇t affect the blade shape.展开更多
文摘In this study,strontium adsorption from sulfuric acid solution by different Dowex 50W-X ion exchange resins was investigated.Among these resins,Dowex 50W-X8 resin showed the maximum sorption of strontium from the aqueous solutions.The effect of pH,contact time,mass of resin,temperature,and concentration of interfering ions on strontium adsorption were evaluated to determine the optimum conditions of strontium sorption process.The kinetic models of sorption were analyzed using pseudo-first and pseudo-second order models.The results indicated that the pseudo-second order kinetic model was more appropriate than the other one.Moreover,the data obtained in this study were fitted into several sorption isotherm models and it was found that the Langmuir sorption isotherm shows the best fitting to the experimental data.
基金sponsored by the Basic Scientific Research of Institute of Geophysics,CEA(DQJB12B20,DQJB12C03,DQJB12B14)
文摘The non-tidal variation gained from continuous gravity observations in stations usually reflects the regional continuous gravity changes. In this paper we focus on studying the non-tidal variation of Baijiatuan station,Beijing where there are two different gravimeters( namely,L&R-804 and PET-031). Based on the original raw tidal records of two gravimeters from 2008 to 2011,we first remove various interference from raw data by the standard procedure software-Tsoft; then we model the solid earth tides, ocean tidal loading and pole tide through related parameters; after that we adopt a new segmented polynomial fitting method based on Tsoft to fit the complex drift of spring gravimeter; and finally we calculate the atmospheric loading effects by a linear regression model. After a series of processing we gain the non-tidal variation of the two gravimeters at Baijiatuan site,Beijing. Furthermore,to analyze the non-tidal variation preliminarily,we study the main component of related tidal data by power spectral density. Comparing the non-tidal variation of two different gravimeters,we find seasonal fluctuations in non-tidal results, which are in accordance with the water storage change. Therefore,we take into account the relevance of gravity changes and water storage based on the gravity data of GRACE and water data of the CMAP model from 2003 to 2011 at different sites in the Chinese mainland( Beijing, Chengdu, Shenyang and Shiquanhe), and make a preliminary analysis on the relationship between gravity changes and water storage.
文摘Optimization of airfoil characteristics such as lift and drag is essential for high efficiency wind turbine blade design. In this research, effects of airfoil lift and drag on blade power coefficients were investigated by using of wind turbine blade design software, PROPID. Firstly, a wind turbine blade of 2MW class was designed with DU-serics airfoils in the inner part and with aNACA series airfoil as a main airfoil in the outer part. Lift distribution was set to have near L/D maximum at each span station. Then, lift and drag curves were modified to observe effect of L/D variation. Drag and lift change with constant L/D on blade power coefficient was also studied for sensitivity investigation. Each case was optimized with Newtonian iteration incorporated in PROPID. High design lift coefficient results in less chord length and twist angle to maintain same aerodynamic load level. And, power coefficient wasn＇t improved much with high L/D. During the process, optimal inputs such as lift distribution, design lift and induction factors were suggested. As results, it was found that L/D maximization was important to obtain high efficiency. For the L/D maximization, lift maximization was important to minimize structural weight, but decreasing drag didn＇t affect the blade shape.
