The design of unique chamber, in which the SCUWC (self-consolidating underwater concrete) can be tested under the impact of the hydrostatic pressure from 0.1 MPa to 0.5 MPa, is presented in the paper. The results of...The design of unique chamber, in which the SCUWC (self-consolidating underwater concrete) can be tested under the impact of the hydrostatic pressure from 0.1 MPa to 0.5 MPa, is presented in the paper. The results of the preliminary tests of the effect of the hydrostatic pressure on the compressive strength of SCUWC were shown. The impact of the hydrostatic pressure on the compressive strength values of test specimens has been confirmed. There has been an increase in the strength of the specimens taken from the upper parts of the concrete samples. As it can be seen from the preliminary research, the differences in compressive strength are related to the differences that occur in the size and distribution of air voids in the samples taken from upper and lower parts of the test specimens. On the basis of the carried out investigations of the compressive strength, it can be concluded that the hydrostatic pressure has a favorable effect on the compressive strength of the tested specimens of SCUWC. Increase of the compressive strength is observed mostly in the upper layers of the samples. Preliminary analysis of the quantity and distribution of air pores in the samples of concrete subjected to pressure 0.5 MPa confirms the positive impact of the hydrostatic pressure on the layers close to the surface indicated by the absence of large air voids above 1,500μm and by reducing the quantity of air pores of size above 300μm.展开更多
Debris flow can cause serious damages to roads, bridges, buildings and other infrastructures.Arranging several rows of deceleration baffles in the significant influence on the mobility and deposition characteristic of...Debris flow can cause serious damages to roads, bridges, buildings and other infrastructures.Arranging several rows of deceleration baffles in the significant influence on the mobility and deposition characteristic of debris flow. The deposit amount first increased then decreased when the flow density rises,flow path can reduce the flow velocity and ensure better protection of life and property. In debris flow prevention projects, deceleration baffles can effectively reduce the erosion of the debris flow and prolong the running time of the drainage channel.This study investigated the degree to which a 6 m long flume and three rows of deceleration baffles reduce the debris flow velocity and affect the energy dissipation characteristics. The influential variables include channel slope, debris flow density, and spacing between baffle rows. The experimental results demonstrated that the typical flow pattern was a sudden increase in flow depth and vertical proliferation when debris flow flows through the baffles. Strong turbulence between debris flow and baffles can contribute to energy dissipation and decrease the kinematic velocity considerably. The results showed that the reduction ratio of velocity increased with the increase in debris flow density,channel slope and spacing between rows. Tests phenomena also indicated that debris flow density hasand the deposit amount of debris flow density of 1500kg/m^3 reached the maximum when the experimental flume slope is 12°.展开更多
Drilling fluid is a common flushing medium used in pile foundation, geological drilling and petroleum drilling. Study on ultrasonic propagation properties in drilling fluid is of vital importance, not only for develop...Drilling fluid is a common flushing medium used in pile foundation, geological drilling and petroleum drilling. Study on ultrasonic propagation properties in drilling fluid is of vital importance, not only for developing equipments to non-contact measuring concrete casting level for bored pile, but also for developing equip- ments considering drilling fluid as signal channel. The existence of clay particles makes the ultrasonic propagation and attenuation in drilling fluid much different from pure water. In order to know the relation among ultrasound frequency, slun-y density and depth, a series of laboratory experiments about ultrasound propagation in water-based bentonite slurry were finished. Wavelet method was adopted to process the gained original waves of ultrasonic propagation in slurry, so we knew the velocity and attenuation coefficient of ultrasound propagated in different drilling fluids with different density. The first group experiments shows that with density of drilling fluid increase, ultrasonic velocity will decrease but attenuation coefficient will increase if ultrasonic frequency keep constant. The second group experiments shows that the power of ultrasound will intensify in small bore hole, the attenuation coefficient is much smaller than theoretical value.展开更多
文摘The design of unique chamber, in which the SCUWC (self-consolidating underwater concrete) can be tested under the impact of the hydrostatic pressure from 0.1 MPa to 0.5 MPa, is presented in the paper. The results of the preliminary tests of the effect of the hydrostatic pressure on the compressive strength of SCUWC were shown. The impact of the hydrostatic pressure on the compressive strength values of test specimens has been confirmed. There has been an increase in the strength of the specimens taken from the upper parts of the concrete samples. As it can be seen from the preliminary research, the differences in compressive strength are related to the differences that occur in the size and distribution of air voids in the samples taken from upper and lower parts of the test specimens. On the basis of the carried out investigations of the compressive strength, it can be concluded that the hydrostatic pressure has a favorable effect on the compressive strength of the tested specimens of SCUWC. Increase of the compressive strength is observed mostly in the upper layers of the samples. Preliminary analysis of the quantity and distribution of air pores in the samples of concrete subjected to pressure 0.5 MPa confirms the positive impact of the hydrostatic pressure on the layers close to the surface indicated by the absence of large air voids above 1,500μm and by reducing the quantity of air pores of size above 300μm.
基金supported by the National Key Technology Research and Development Program of China (No. 2014BAL05B01)the Science and Technology Service Network Initiative of Chinese Academy of Sciences (No. KFJ-EW-STS-094)+1 种基金the National Science Foundation of China (No. 41302283)the West Light Foundation of Chinese Academy of Sciences
文摘Debris flow can cause serious damages to roads, bridges, buildings and other infrastructures.Arranging several rows of deceleration baffles in the significant influence on the mobility and deposition characteristic of debris flow. The deposit amount first increased then decreased when the flow density rises,flow path can reduce the flow velocity and ensure better protection of life and property. In debris flow prevention projects, deceleration baffles can effectively reduce the erosion of the debris flow and prolong the running time of the drainage channel.This study investigated the degree to which a 6 m long flume and three rows of deceleration baffles reduce the debris flow velocity and affect the energy dissipation characteristics. The influential variables include channel slope, debris flow density, and spacing between baffle rows. The experimental results demonstrated that the typical flow pattern was a sudden increase in flow depth and vertical proliferation when debris flow flows through the baffles. Strong turbulence between debris flow and baffles can contribute to energy dissipation and decrease the kinematic velocity considerably. The results showed that the reduction ratio of velocity increased with the increase in debris flow density,channel slope and spacing between rows. Tests phenomena also indicated that debris flow density hasand the deposit amount of debris flow density of 1500kg/m^3 reached the maximum when the experimental flume slope is 12°.
文摘Drilling fluid is a common flushing medium used in pile foundation, geological drilling and petroleum drilling. Study on ultrasonic propagation properties in drilling fluid is of vital importance, not only for developing equipments to non-contact measuring concrete casting level for bored pile, but also for developing equip- ments considering drilling fluid as signal channel. The existence of clay particles makes the ultrasonic propagation and attenuation in drilling fluid much different from pure water. In order to know the relation among ultrasound frequency, slun-y density and depth, a series of laboratory experiments about ultrasound propagation in water-based bentonite slurry were finished. Wavelet method was adopted to process the gained original waves of ultrasonic propagation in slurry, so we knew the velocity and attenuation coefficient of ultrasound propagated in different drilling fluids with different density. The first group experiments shows that with density of drilling fluid increase, ultrasonic velocity will decrease but attenuation coefficient will increase if ultrasonic frequency keep constant. The second group experiments shows that the power of ultrasound will intensify in small bore hole, the attenuation coefficient is much smaller than theoretical value.