This paper focuses on the state space modeling approach and output torques prediction of torsional vibrations for variable speed wind turbines. The multi-body system model under study is mainly comprised of a wind tur...This paper focuses on the state space modeling approach and output torques prediction of torsional vibrations for variable speed wind turbines. The multi-body system model under study is mainly comprised of a wind turbine, a three stage planetary gear box and an induction generator. The masses-springs approach of shaft system differential equations is developed from Newton＇s law and Lagrange formulas. For an easy comprehension for electrical engineers and tutorial purpose, an electrical equivalent circuit of the system is proposed by using mechanical and electrical components similarities. Extensive numerical simulations are performed to investigate system mechanical resonances and impacts of damping factors on the system dynamic and stability.展开更多
In this work the authors present a calculation process of the blades for wind turbine with horizontal axis. It is about a blade discretized by the finite element method （FEM） in order to determine the gyroscopic eff...In this work the authors present a calculation process of the blades for wind turbine with horizontal axis. It is about a blade discretized by the finite element method （FEM） in order to determine the gyroscopic effect during its rotation at a high speed. A blade must have the maximum output and resist to aerodynamic loads distributed over its length, which are related to its geometrical characteristics and the speed of the wind. For that, the authors wrote the relations whom determine these loads according to the flow speed of the wind, then, the authors integrated them in the laws of structure mechanics to obtain the motion equations of the blade. This process was applied to a twisted blade with a length of 1.9 m, built out of pressed aluminum sheet with a profile of the type NACA; this profile gives the best aerodynamic output. This blade is an element of a three-bladed propeller for wind turbine of maximum power 5 kW. Finally, we visualized its deformations and then the authors checked its holding in service.展开更多
In the present research work, the pitch-control is carried out such that the rotor blades are rotated around their longitudinal axis while the rotor continues its normal rotation. It is really a challenge to produce a...In the present research work, the pitch-control is carried out such that the rotor blades are rotated around their longitudinal axis while the rotor continues its normal rotation. It is really a challenge to produce a clever design to pitch the rotor blades by the optimal amount so as to maximize the power output at all wind speeds. The mechanism is implemented to a three-blade, horizontal-axis, home-scale wind turbine. The mechanism is powered by a suitable DC （direct-current） motor. The tests were carried out in the open section of a delivery wind tunnel. The air speed was measured by a suitable anemometer. The corresponding rotational speed （rpm） and output voltage at different wind speeds were measured and recorded for calibration of the control system. The mechanism proved to be successful in controlling the pitch angle over a wide range of wind speeds.展开更多
In this work, the efficiency ofa 1 kWp horizontal-axis wind turbine which is installed on the roof of the engineering building at the University of Salento has been evaluated, by means of CFD （computational fluid dyn...In this work, the efficiency ofa 1 kWp horizontal-axis wind turbine which is installed on the roof of the engineering building at the University of Salento has been evaluated, by means of CFD （computational fluid dynamic） and experimental data. Particularly, the influence of the building on the micro wind turbine performance has been studied and the numerical results （wind velocity fields and turbulence intensity above the building） have been compared with the experimental data collected over a period of three years. The results have shown that horizontal-axis wind turbines suffer from wake effect due to buildings, therefore, best sites in urban area have to be identified by a careful fluid dynamic analysis aimed at evaluating all causes that can reduce significantly the performance of the generator： in fact, building should allow to exploit increased wind intensity, but often this advantage is voided by turbulence phenomena, as in the case under investigation where the measured aerogenerator efficiency is lower than the nominal performance curve. Then, the best site can be found by crossing the contours of wind velocity with the turbulence intensity fields： in this way it is possible to localize an area （best location） where the aerogenerator can give maximum performance.展开更多
Optimization of airfoil characteristics such as lift and drag is essential for high efficiency wind turbine blade design. In this research, effects of airfoil lift and drag on blade power coefficients were investigate...Optimization of airfoil characteristics such as lift and drag is essential for high efficiency wind turbine blade design. In this research, effects of airfoil lift and drag on blade power coefficients were investigated by using of wind turbine blade design software, PROPID. Firstly, a wind turbine blade of 2MW class was designed with DU-serics airfoils in the inner part and with aNACA series airfoil as a main airfoil in the outer part. Lift distribution was set to have near L/D maximum at each span station. Then, lift and drag curves were modified to observe effect of L/D variation. Drag and lift change with constant L/D on blade power coefficient was also studied for sensitivity investigation. Each case was optimized with Newtonian iteration incorporated in PROPID. High design lift coefficient results in less chord length and twist angle to maintain same aerodynamic load level. And, power coefficient wasn＇t improved much with high L/D. During the process, optimal inputs such as lift distribution, design lift and induction factors were suggested. As results, it was found that L/D maximization was important to obtain high efficiency. For the L/D maximization, lift maximization was important to minimize structural weight, but decreasing drag didn＇t affect the blade shape.展开更多
This paper has attempted to study a mechanism of three-dimensional flow around a horizontal axis wind turbine(HAWT) rotor blade. An experimental study of the flow phenomenon in the vicinity of the wind turbine blade i...This paper has attempted to study a mechanism of three-dimensional flow around a horizontal axis wind turbine(HAWT) rotor blade. An experimental study of the flow phenomenon in the vicinity of the wind turbine blade is a challenging endeavor. In this research, the HAWT model with 2.4 m diameter was tested in the large wind tunnel. The flow around the rotating blade surface was measured simultaneously for three velocity components, and two probes were used for the synchronized measurement of three-dimensional flow components. The local velocity was detected for the single seeding particle measured in the point where three pairs of laser beams intersected. Blade sections of interest in this study are composed of radial positions r/R = 0.3, 0.5 and 0.7. Optimum and low tip speed ratio flow characteristics were also compared. The velocity flow vector, skin friction coefficient and bound circulation were calculated from LDV measurements, and the experimental research showed reasonably and clearly the experimental results.展开更多
The effects of turbulent intensity and vortex scale of simulated natural wind on performance of a horizontal axis wind turbine(HAWT) are mainly investigated in this paper. In particular, the unsteadiness and turbulenc...The effects of turbulent intensity and vortex scale of simulated natural wind on performance of a horizontal axis wind turbine(HAWT) are mainly investigated in this paper. In particular, the unsteadiness and turbulence of wind in Japan are stronger than ones in Europe and North America in general. Hence, Japanese engineers should take account of the velocity unsteadiness of natural wind at installed open-air location to design a higher performance wind turbine. Using the originally designed five wind turbines on the basis of NACA and MEL blades, the dependencies of the wind frequency and vortex scale of the simulated natural wind are presented. As the results, the power coefficient of the newly designed MEL3-type rotor in the simulated natural wind is 130% larger than one in steady wind.展开更多
The relationship between the maximum shear stress in a substrate solid and the elastic wave reflection coefficient from the interface between the substrate solid and an overlying solid half-space is investigated. Both...The relationship between the maximum shear stress in a substrate solid and the elastic wave reflection coefficient from the interface between the substrate solid and an overlying solid half-space is investigated. Both substrate and overlying solid media are assumed to be initially isotropic and stress-free. Then as the substrate is subjected to horizontal confined stresses it becomes anisotropic. It is shown that longitudinal and shear wave reflection coefficients are related to the degree of stress induced anisotropy in the substrate medium. From this relation the confined stress level and the maximum shear stress generated on the vertical planes of the substrate are estimated. Authors in their previous investigation computed plane wave reflection coefficient in a biaxially compressed solid substrate immersed in a fluid. This paper reports for the first time how the maximum shear stress in a biaxially compressed substrate medium can be measured from the plane wave reflection coefficients when the overlying medium is also a solid half-space.展开更多
文摘This paper focuses on the state space modeling approach and output torques prediction of torsional vibrations for variable speed wind turbines. The multi-body system model under study is mainly comprised of a wind turbine, a three stage planetary gear box and an induction generator. The masses-springs approach of shaft system differential equations is developed from Newton＇s law and Lagrange formulas. For an easy comprehension for electrical engineers and tutorial purpose, an electrical equivalent circuit of the system is proposed by using mechanical and electrical components similarities. Extensive numerical simulations are performed to investigate system mechanical resonances and impacts of damping factors on the system dynamic and stability.
文摘In this work the authors present a calculation process of the blades for wind turbine with horizontal axis. It is about a blade discretized by the finite element method （FEM） in order to determine the gyroscopic effect during its rotation at a high speed. A blade must have the maximum output and resist to aerodynamic loads distributed over its length, which are related to its geometrical characteristics and the speed of the wind. For that, the authors wrote the relations whom determine these loads according to the flow speed of the wind, then, the authors integrated them in the laws of structure mechanics to obtain the motion equations of the blade. This process was applied to a twisted blade with a length of 1.9 m, built out of pressed aluminum sheet with a profile of the type NACA; this profile gives the best aerodynamic output. This blade is an element of a three-bladed propeller for wind turbine of maximum power 5 kW. Finally, we visualized its deformations and then the authors checked its holding in service.
文摘In the present research work, the pitch-control is carried out such that the rotor blades are rotated around their longitudinal axis while the rotor continues its normal rotation. It is really a challenge to produce a clever design to pitch the rotor blades by the optimal amount so as to maximize the power output at all wind speeds. The mechanism is implemented to a three-blade, horizontal-axis, home-scale wind turbine. The mechanism is powered by a suitable DC （direct-current） motor. The tests were carried out in the open section of a delivery wind tunnel. The air speed was measured by a suitable anemometer. The corresponding rotational speed （rpm） and output voltage at different wind speeds were measured and recorded for calibration of the control system. The mechanism proved to be successful in controlling the pitch angle over a wide range of wind speeds.
文摘In this work, the efficiency ofa 1 kWp horizontal-axis wind turbine which is installed on the roof of the engineering building at the University of Salento has been evaluated, by means of CFD （computational fluid dynamic） and experimental data. Particularly, the influence of the building on the micro wind turbine performance has been studied and the numerical results （wind velocity fields and turbulence intensity above the building） have been compared with the experimental data collected over a period of three years. The results have shown that horizontal-axis wind turbines suffer from wake effect due to buildings, therefore, best sites in urban area have to be identified by a careful fluid dynamic analysis aimed at evaluating all causes that can reduce significantly the performance of the generator： in fact, building should allow to exploit increased wind intensity, but often this advantage is voided by turbulence phenomena, as in the case under investigation where the measured aerogenerator efficiency is lower than the nominal performance curve. Then, the best site can be found by crossing the contours of wind velocity with the turbulence intensity fields： in this way it is possible to localize an area （best location） where the aerogenerator can give maximum performance.
文摘Optimization of airfoil characteristics such as lift and drag is essential for high efficiency wind turbine blade design. In this research, effects of airfoil lift and drag on blade power coefficients were investigated by using of wind turbine blade design software, PROPID. Firstly, a wind turbine blade of 2MW class was designed with DU-serics airfoils in the inner part and with aNACA series airfoil as a main airfoil in the outer part. Lift distribution was set to have near L/D maximum at each span station. Then, lift and drag curves were modified to observe effect of L/D variation. Drag and lift change with constant L/D on blade power coefficient was also studied for sensitivity investigation. Each case was optimized with Newtonian iteration incorporated in PROPID. High design lift coefficient results in less chord length and twist angle to maintain same aerodynamic load level. And, power coefficient wasn＇t improved much with high L/D. During the process, optimal inputs such as lift distribution, design lift and induction factors were suggested. As results, it was found that L/D maximization was important to obtain high efficiency. For the L/D maximization, lift maximization was important to minimize structural weight, but decreasing drag didn＇t affect the blade shape.
基金supported by the Inner Mongolia Autonomous Region Open Major Basic Research Project(Grant No.20120905)the National Natural Science Foundation of China(Grant No.51666014)
文摘Wind tunnel experiments of the wake characteristics of a two-blade wind turbine, in the downstream region of 0
文摘This paper has attempted to study a mechanism of three-dimensional flow around a horizontal axis wind turbine(HAWT) rotor blade. An experimental study of the flow phenomenon in the vicinity of the wind turbine blade is a challenging endeavor. In this research, the HAWT model with 2.4 m diameter was tested in the large wind tunnel. The flow around the rotating blade surface was measured simultaneously for three velocity components, and two probes were used for the synchronized measurement of three-dimensional flow components. The local velocity was detected for the single seeding particle measured in the point where three pairs of laser beams intersected. Blade sections of interest in this study are composed of radial positions r/R = 0.3, 0.5 and 0.7. Optimum and low tip speed ratio flow characteristics were also compared. The velocity flow vector, skin friction coefficient and bound circulation were calculated from LDV measurements, and the experimental research showed reasonably and clearly the experimental results.
基金supported by Hatakeyama Grant-in-Aid(2014)of Turbomachinery of Japanthe support of Dr.Hikaru Matsumiya and Dr.Tetsuya Kogaki(National Institute of Advanced Industrial Science and Technology of Japan)for providing MEL blade data
文摘The effects of turbulent intensity and vortex scale of simulated natural wind on performance of a horizontal axis wind turbine(HAWT) are mainly investigated in this paper. In particular, the unsteadiness and turbulence of wind in Japan are stronger than ones in Europe and North America in general. Hence, Japanese engineers should take account of the velocity unsteadiness of natural wind at installed open-air location to design a higher performance wind turbine. Using the originally designed five wind turbines on the basis of NACA and MEL blades, the dependencies of the wind frequency and vortex scale of the simulated natural wind are presented. As the results, the power coefficient of the newly designed MEL3-type rotor in the simulated natural wind is 130% larger than one in steady wind.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41474098, 11134011)by State Key Laboratory of Acoustics (Grant No. SKLA201608)
文摘The relationship between the maximum shear stress in a substrate solid and the elastic wave reflection coefficient from the interface between the substrate solid and an overlying solid half-space is investigated. Both substrate and overlying solid media are assumed to be initially isotropic and stress-free. Then as the substrate is subjected to horizontal confined stresses it becomes anisotropic. It is shown that longitudinal and shear wave reflection coefficients are related to the degree of stress induced anisotropy in the substrate medium. From this relation the confined stress level and the maximum shear stress generated on the vertical planes of the substrate are estimated. Authors in their previous investigation computed plane wave reflection coefficient in a biaxially compressed solid substrate immersed in a fluid. This paper reports for the first time how the maximum shear stress in a biaxially compressed substrate medium can be measured from the plane wave reflection coefficients when the overlying medium is also a solid half-space.
