Global water security is a severe issue that threatens human health and well-being. Finding sustainable alternative water resources has become a matter of great urgency. For coastal urban areas, desalinated seawater c...Global water security is a severe issue that threatens human health and well-being. Finding sustainable alternative water resources has become a matter of great urgency. For coastal urban areas, desalinated seawater could serve as a freshwater supply. However, since 20%-30% of the water supply is used for flushing waste from the city, seawater with simple treatment could also partly replace the use of freshwater. In this work, the freshwater saving potential and environmental impacts of the urban water system （water-wastewater closed loop） adopting seawater desalination, seawater for toilet flushing （SWTF）, or reclaimed water for toilet flushing （RWTF） are compared with those of a conventional freshwater system, through a life-cycle assessment and sensitivity analysis. The potential applications of these processes are also assessed. The results support the environmental sustainability of the SWTF approach, but its potential application depends on the coastal distance and effective population density of a city. Developed coastal cities with an effective population density exceeding 3000 persons.km-2 and located less than 30 km from the seashore （for the main pipe supplying seawater to the city） would benefit from applying SWTF, regardless of other impact parameters. By further applying the sulfate reduction, autotrophic denitrification, and nitrification integrated （SANI） process for wastewater treatment, the maximum distance from the seashore can be extended to 60 km. Considering that most modern urbanized cities fulfill these criteria, the next generation of water supply systems could consist of a freshwater supply coupled with a seawater supply for sustainable urban development.展开更多
With the progress of computer technology, water pollution control and planning has been a hot topic in the scientific community. This paper discusses corresponding research on the applications of cyclic water quality ...With the progress of computer technology, water pollution control and planning has been a hot topic in the scientific community. This paper discusses corresponding research on the applications of cyclic water quality model and simulated annealing algorithm for water pollution control and planning. Environmental engineering education has been the focus of much attention in recent years. Teaching methods of water pollution control and sustainable teaching innovation and creation was explored by many scholars, and the majority of workers engaged in teaching the course. The simulation result proves the effectiveness of the method. We plan to conduct more research in the future research to obtain better research result.展开更多
Laboratory tests revealed that the behavior of brick masonry under compressive cyclic loading is characterized by three distinct stress-strain curves. These three curves are termed as envelope curve, common point curv...Laboratory tests revealed that the behavior of brick masonry under compressive cyclic loading is characterized by three distinct stress-strain curves. These three curves are termed as envelope curve, common point curve and stability point curve. The envelope curve is obtained by superimposing the cyclic peaks on the monotonic stress-strain curve. The common point curve is the locus of intersection points of loading and unloading curves of the cycles. If for the same cycle, the loading and unloading are repeated several times, the intersection points of loading and unloading paths will stabilize at a lower bound. The locus of these stabilized points （lower bound points） of all cycles form the stability point curve. Therefore, the stability point curve can be used as a measure for the allowable stress for masonry under cyclic loadings. The proposed cyclic allowable stress level is associated with the accumulation of residual （plastic） strain levels as a result of cyclic loading history. The permissible stress level was found to be about two thirds of the cyclic peak stress of the specimen.展开更多
文摘Global water security is a severe issue that threatens human health and well-being. Finding sustainable alternative water resources has become a matter of great urgency. For coastal urban areas, desalinated seawater could serve as a freshwater supply. However, since 20%-30% of the water supply is used for flushing waste from the city, seawater with simple treatment could also partly replace the use of freshwater. In this work, the freshwater saving potential and environmental impacts of the urban water system （water-wastewater closed loop） adopting seawater desalination, seawater for toilet flushing （SWTF）, or reclaimed water for toilet flushing （RWTF） are compared with those of a conventional freshwater system, through a life-cycle assessment and sensitivity analysis. The potential applications of these processes are also assessed. The results support the environmental sustainability of the SWTF approach, but its potential application depends on the coastal distance and effective population density of a city. Developed coastal cities with an effective population density exceeding 3000 persons.km-2 and located less than 30 km from the seashore （for the main pipe supplying seawater to the city） would benefit from applying SWTF, regardless of other impact parameters. By further applying the sulfate reduction, autotrophic denitrification, and nitrification integrated （SANI） process for wastewater treatment, the maximum distance from the seashore can be extended to 60 km. Considering that most modern urbanized cities fulfill these criteria, the next generation of water supply systems could consist of a freshwater supply coupled with a seawater supply for sustainable urban development.
文摘With the progress of computer technology, water pollution control and planning has been a hot topic in the scientific community. This paper discusses corresponding research on the applications of cyclic water quality model and simulated annealing algorithm for water pollution control and planning. Environmental engineering education has been the focus of much attention in recent years. Teaching methods of water pollution control and sustainable teaching innovation and creation was explored by many scholars, and the majority of workers engaged in teaching the course. The simulation result proves the effectiveness of the method. We plan to conduct more research in the future research to obtain better research result.
文摘Laboratory tests revealed that the behavior of brick masonry under compressive cyclic loading is characterized by three distinct stress-strain curves. These three curves are termed as envelope curve, common point curve and stability point curve. The envelope curve is obtained by superimposing the cyclic peaks on the monotonic stress-strain curve. The common point curve is the locus of intersection points of loading and unloading curves of the cycles. If for the same cycle, the loading and unloading are repeated several times, the intersection points of loading and unloading paths will stabilize at a lower bound. The locus of these stabilized points （lower bound points） of all cycles form the stability point curve. Therefore, the stability point curve can be used as a measure for the allowable stress for masonry under cyclic loadings. The proposed cyclic allowable stress level is associated with the accumulation of residual （plastic） strain levels as a result of cyclic loading history. The permissible stress level was found to be about two thirds of the cyclic peak stress of the specimen.
