陆成煤及成煤二元论

以将今论古和模拟实验的方法，通过对黑龙江二龙山一带常年无覆水的正地形泥炭地的研究，建立了陆成煤的理论，并创新地提出成煤二元论。

Synthesis, characterization and application of a dispersant based on rosin for coal-water slurry

A rosin derivative and maleopimaric acid diethanolamide(MAD), was synthesized, characterized by FTIR and1 H NMR, and applied as dispersant for the coal-water slurry(CWS) prepared from Chinese Shenfu coal. The CWS application performance investigation shows that the MAD dispersant has better abilities in reducing CWS viscosity and stabilizing the slurry than a commercial dispersant—sulfonated naphthalene-formaldehyde condensate(SNF). The physicochemical property investigation of the two tested dispersants shows that the adsorption amount of the MAD at coal-water interface is much larger than that of SNF, and the MAD has better wetting property than the SNF on the coal surface. It indicated that the excellent capabilities of MAD are related to the adsorption mode of standing upright on the coal surface. Based on the above, the mechanism of dispersion and stabilization of the CWS prepared from MAD dispersant is presented.

Laser triangulation measurement of the level in a coal silo

Laser triangulation theory was used to develop a novel contact-free method for measuring the coal level in a silo under harsh environmental conditions found in coal mines, such as the presence of dense dust, high humidity, and low illumination. A laser source and a camera were mounted at the top of the silo. The laser spot projected into the silo was imaged by the camera. The pinhole imaging principle allows the level to be found from the lateral shift of the spot image on the sensor. A pre-calibrated look-up table of the coal depth versus spot position was used to obtain the depth. The measurement accuracy depends on the step size used during pre-calibration. The actual application of a device designed according to these principles shows that it is easy to implement. The detection of the coal level in a silo at the low illumination level found in coal mines is demonstrated.

Research on Synthesizing Disperser with Fraction of Anthracene Oil for Coal Water Slurry

Experiment of synthesizing a disperser for coal water slurry (CWS) by using fractions of anthracene oil from high-temperature coal tar was performed. The orthogonal test was used to investigate the influence of temperature, time, quantity of sulfonation agent and condensation agent and the interaction of these factors on properties of the disperser. The result shows that the influence of temperature, time, quantity of sulfonation agent and condensation agent, and the interaction of sulfonation time and sulfonation agent has a significant influence on the properties of disperser. The optimal condition of synthesis is that in 150g of the fractions of anthracene oil, 40 mL of sulfonation agent is added and sulfonated for 3 h at 130℃, then, 10 mL of condensing agent is added and condensated for 1.5 h at 115 ℃.

Silica-alumina molar ratio and some factors effect on the synthesis of zeolites from fly ash

In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.

Influence of Hydrothermal Pre-Treatment of Coal Fly on the Synthesis of Belite Phase

In this paper, the results of an extensive investigation of hydrothermal pre-treatment for synthesizing belite phase from reactive mixtures （CaO/SiO2 molar ratio of 2） consisting of one waste kinds （bottom ash-BA or fly ash-FA） from fluidised brown coal combustion in Slovakian power plant and CaO （analytical grade reagent） addition are summarized. Changes in structure and phase composition of hydrothermally synthesized belite precursors and subsequent calcinated products were compared with those of starting mixtures. Based on XRD diffraction patterns, the formation of the new profiles corresponding to CSH phases with low degree of ordering as belite precursors after hydrothermal treatment was confirmed. Calcination of hydrotermally treated products at 900℃ led to transformation of CSH phases to wollastonite, belite and gehlenite phase. Differences in phase composition of products before and after calcination depend upon waste quality and precursor＇s synthesis conditions. Bottom ash isn＇t suitable as raw material for synthesizing belite phase because of high CaO content fixed in anhydrite form （44.1%）. Coal fly ash with low CaO content in anhydrite form （4.2%） and its hydrothermal treatment in combination with subsequent heating offer opportunities for the utilization of coal fly ash as raw material for belite production.

Low-temperature Synthesis of Belite Cement from Reactive Mixtures Based on Coal Fly Ash

This paper summarizes the selected results of an extensive investigation of application of two methods （hydrothermal and mechanochemical） assisted by calcination for synthesizing belite cement from reactive mixtures （CaO/SiO2 molar ratio of 2） consisting of various waste kinds from fluidized brown coal combustion in Slovakian power plant and CaO addition. Based on XRD diffraction patterns and infrared spectra ofpre-treatment products, the formation of the new profiles corresponding to CSH phases with low degree of ordering as belite precursors after hydrothermal treatment as well as metastables calcium silicates and aluminosilicates in mechanosynthesized products was confirmed. Calcination of hydrothermally treated products led to transformation of CSH phases to wollastonite （CS）, belite and gehlenite phase, whereas creation oft^- and I^-C2S or wollastonite in milled reactive mixture took place. Differences in phase composition of products before and after calcination depend upon waste quality and precursor＇s synthesis conditions. Bottom ash isn＇t suitable as raw material for synthesizing belite phase because of high CaO content fixed in anhydrite form （44.1%）. Coal fly ash with low CaO content in anhydrite form （4.2%） and its mechanochemical or hydrothermal treatment in combination with subsequent heating offer opportunities for the utilization of coal fly ash as raw material for belite production.

STUDY OF A FAULT DIAGNOSIS EXPERT SYSTEM FOR SYNTHETIC MINING SYSTEM HYDRAULIC SUPPORT

Fault diagnosis expert system for hydraulic support is studied.The system is achieved by Turbo prolong Language, it summaries the experience of the domain expert and sets up a fault tree, knowledge base is developed by a productive rule.According to the feature of diagnosis, the system selects forward non determination inferring and limited depth first search strategy.It can accomplish expert diagnosis of more than 50 kinds faults in hydraulic support.