In order to solve the problems like rotten bed caused by accumulated wa-ter in the beddings of the deep-litter system, the ＂heat pulse method＂ was deter-mined as the moisture control method for beddings through test...In order to solve the problems like rotten bed caused by accumulated wa-ter in the beddings of the deep-litter system, the ＂heat pulse method＂ was deter-mined as the moisture control method for beddings through tests, and a set of e-quipment was designed for the moisture control of deep-litter beddings. With STC89C52 micro-control er as the center, WL433A wireless communication module as means of data transmission, VB.NET for PC development, Access as back-ground database, the system realized the real-time col ection, wireless transmission, automatic storage and remote real-time monitoring of the internal information of the deep-litter beddings, which provided the facility basis for the research on the mois-ture control of deep-litter beddings, and to a certain extent, promoted the develop-ment of the facilities and equipment for livestock breeding.展开更多
[Objective] The aim was to improve part of auto-control system of aquatic seedling breeding and to lay foundation for highly-efficient and stable use of the sys- tem. [Method] The executive and drive modules of the au...[Objective] The aim was to improve part of auto-control system of aquatic seedling breeding and to lay foundation for highly-efficient and stable use of the sys- tem. [Method] The executive and drive modules of the auto-control system were im- proved, after which real-time monitor, data display and alarm modules were tested on time. [Result] In the test, for the improved system, stability and sensitivity were enhanced; different components matched better; transmitting electric resistanc6 was reduced. [Conclusion] The research provides references for auto-control of water temperature and dissolved oxygen, and faults clearing in aquatic seedling breeding.展开更多
For dealing with large static error due to poor immunity of the traditional fuzzy control, a novel interval type-2 fuzzy control system is proposed. By extending the typical membership functions to interval type-2 mem...For dealing with large static error due to poor immunity of the traditional fuzzy control, a novel interval type-2 fuzzy control system is proposed. By extending the typical membership functions to interval type-2 membership functions, the proposed control system can efficiently reduce the uncertain disturbance from real environment without increasing the design complexity. The simulation results on the water tank level control system showed that the proposed method succeeded in better static and dynamic control with stronger robust performance than the traditional fuzzy control method.展开更多
The dynamics of hydraulic systems are highly nonlinear and the system may be subjected to non-smooth and discontinuous nonlinearities due to directional change of valve opening, friction, etc. Aside from the nonlinear...The dynamics of hydraulic systems are highly nonlinear and the system may be subjected to non-smooth and discontinuous nonlinearities due to directional change of valve opening, friction, etc. Aside from the nonlinear nature of hydraulic dynamics, hydraulic servo systems also have large extent of model uncertainties. To address these challenging issues, a robust state-feedback controller is designed by employing backstepping design technique such that the system output tracks a given signal arbitrarily well, and all signals in the closed-loop system remain bounded. Moreover, a relevant disturbance attenuation inequality is satisfied by the closed-loop signals. Compared with previously proposed robust controllers, this paper's robust controller based on backstepping recursive design method is easier to design, and is more suitable for implementation.展开更多
The grinding process in concentration plants of the metallurgical industry is of great importantce.. A mineral feed- ing SCADA system in the grinding process was designed with the idea of integrating management and co...The grinding process in concentration plants of the metallurgical industry is of great importantce.. A mineral feed- ing SCADA system in the grinding process was designed with the idea of integrating management and control functions. A detailed design and realization method of control and supervisory control levels in the system was introduced. At the control level, with an algorithm of a separate integrated PID, four mineral feeding machines are run in turn. The supervisory control level can generate process flow graphs, statistical report forms, historical trends and at the same time, it has the functions of alarm, system administration, user login, etc. After the mineral SCADA system has been started, the mineral feeding is very stable, the workstation completely supervises and controls the entire process of mineral feeding, and at the same time histori- cal data is shown and questions can be answered conveniently. The system runs well in the MeiShan Concentration Plant of the Shanghai Bao Shan Steel Group.展开更多
The control system of an autonomous underwater vehicle （AUV） is introduced. According to control requirements of the AUV, a simple but practical adaptive PID control method is designed The semi-physical simulation ...The control system of an autonomous underwater vehicle （AUV） is introduced. According to control requirements of the AUV, a simple but practical adaptive PID control method is designed The semi-physical simulation is done to test the feasibility of the control system. The neural network idea and the structure of PID controller are referred to design the adaptive PID controller. An intelligent integral is introduced to improve control precision. Compaed with traditional PID con- trollers, the adaptive PID controller has simple structure, good online adjusting ability, fast convergence and good robustness. The simulation experiments also show that the adaptive PID control system has high precision and fine antijamming ability.展开更多
The weighing system designed for large structure object is mainly composed of three parts. The part of hydraulic system is made up of hydraulic cylinders, high pressure hydraulic hoses and electric pumps; the part of ...The weighing system designed for large structure object is mainly composed of three parts. The part of hydraulic system is made up of hydraulic cylinders, high pressure hydraulic hoses and electric pumps; the part of computer controlling system comprises pressure sensors, displacement sensors, data acquisitions, RS 485 network and the computer controlling model; the part of loading system is composed of the fulcrum structure and the concrete girder. The measurement principle and composition of the weighing system are discussed in this paper. Credibility and security of the weighing system are fully considered during the design phase. The hydraulic system is controlled by pilot operated check valves in case of the sudden loss of system pressure. The states of all gauges and RS485 network are monitored by computer controlling system functioning in different modules. When the system is running incorrectly, it will be switched to manual mode and give alarm. The finite element method is employed to analyze fulcrum structure so that the system has enough intensity to be lifted. Hence the reliability of the whole system is enhanced.展开更多
Autonomous underwater vehicles (AUVs) navigating in complex sea conditions usually require a strong control system to keep the fastness and stability. The nonlinear trajectory tracking control system of a new AUV in c...Autonomous underwater vehicles (AUVs) navigating in complex sea conditions usually require a strong control system to keep the fastness and stability. The nonlinear trajectory tracking control system of a new AUV in complex sea conditions was presented. According to the theory of submarines,the six-DOF kinematic and dynamic models were decomposed into two mutually non-coupled vertical and horizontal plane subsystems. Then,different sliding mode control algorithms were used to study the trajectory tracking control. Because the yaw angle and yaw angle rate rather than the displacement of the new AUV can be measured directly on the horizontal plane,the sliding mode control algorithm combining cross track error method and line of sight method was used to fulfill its high-precision trajectory tracking control in the complex sea conditions. As the vertical displacement of the new AUV can be measured,in order to achieve the tracking of time-varying depth signal,a stable sliding mode controller was designed based on the single-input multi-state system,which took into account the characteristic of the hydroplane and the amplitude and rate constraints of the hydroplane angle. Moreover,the application of dynamic boundary layer can improve the robustness and control accuracy of the system. The computational results show that the designed sliding mode control systems of the horizontal and vertical planes can ensure the trajectory tracking performance and accuracy of the new AUV in complex sea conditions. The impacts of currents and waves on the sliding mode controller of the new AUV were analyzed qualitatively and quantitatively by comparing the trajectory tracking performance of the new AUV in different sea conditions,which provides an effective theoretical guidance and technical support for the control system design of the new AUV in real complex environment.展开更多
In this paper, graphical-user-interface （GUI） software for simulation and fuzzy-logic control of a remotely operated vehicle （ROV） using MATLABTM GUI Designing Environment is proposed. The proposed ROV＇s GUI plat...In this paper, graphical-user-interface （GUI） software for simulation and fuzzy-logic control of a remotely operated vehicle （ROV） using MATLABTM GUI Designing Environment is proposed. The proposed ROV＇s GUI platform allows the controller such as fuzzy-logic control systems design to be compared with other controllers such as proportional-integral-derivative （PID） and sliding-mode controller （SMC） systematically and interactively. External disturbance such as sea current can he added to improve the modelling in actual underwater environment. The simulated results showed the position responses of the fuzzy-logic control exhibit reasonable performance under the sea current disturbance.展开更多
基金Supported by the Fund for Independent Innovation of Agricultural Sciences in Jiangsu Province(CX(13)3073)~~
文摘In order to solve the problems like rotten bed caused by accumulated wa-ter in the beddings of the deep-litter system, the ＂heat pulse method＂ was deter-mined as the moisture control method for beddings through tests, and a set of e-quipment was designed for the moisture control of deep-litter beddings. With STC89C52 micro-control er as the center, WL433A wireless communication module as means of data transmission, VB.NET for PC development, Access as back-ground database, the system realized the real-time col ection, wireless transmission, automatic storage and remote real-time monitoring of the internal information of the deep-litter beddings, which provided the facility basis for the research on the mois-ture control of deep-litter beddings, and to a certain extent, promoted the develop-ment of the facilities and equipment for livestock breeding.
文摘[Objective] The aim was to improve part of auto-control system of aquatic seedling breeding and to lay foundation for highly-efficient and stable use of the sys- tem. [Method] The executive and drive modules of the auto-control system were im- proved, after which real-time monitor, data display and alarm modules were tested on time. [Result] In the test, for the improved system, stability and sensitivity were enhanced; different components matched better; transmitting electric resistanc6 was reduced. [Conclusion] The research provides references for auto-control of water temperature and dissolved oxygen, and faults clearing in aquatic seedling breeding.
基金Supported by Program for Liaoning Excellent Talents in University (LJQ2011032)the National Natural Science Foundation of China (61203021)the National Science and Technology Support Program (2012BAF05B00)
文摘For dealing with large static error due to poor immunity of the traditional fuzzy control, a novel interval type-2 fuzzy control system is proposed. By extending the typical membership functions to interval type-2 membership functions, the proposed control system can efficiently reduce the uncertain disturbance from real environment without increasing the design complexity. The simulation results on the water tank level control system showed that the proposed method succeeded in better static and dynamic control with stronger robust performance than the traditional fuzzy control method.
文摘The dynamics of hydraulic systems are highly nonlinear and the system may be subjected to non-smooth and discontinuous nonlinearities due to directional change of valve opening, friction, etc. Aside from the nonlinear nature of hydraulic dynamics, hydraulic servo systems also have large extent of model uncertainties. To address these challenging issues, a robust state-feedback controller is designed by employing backstepping design technique such that the system output tracks a given signal arbitrarily well, and all signals in the closed-loop system remain bounded. Moreover, a relevant disturbance attenuation inequality is satisfied by the closed-loop signals. Compared with previously proposed robust controllers, this paper's robust controller based on backstepping recursive design method is easier to design, and is more suitable for implementation.
文摘The grinding process in concentration plants of the metallurgical industry is of great importantce.. A mineral feed- ing SCADA system in the grinding process was designed with the idea of integrating management and control functions. A detailed design and realization method of control and supervisory control levels in the system was introduced. At the control level, with an algorithm of a separate integrated PID, four mineral feeding machines are run in turn. The supervisory control level can generate process flow graphs, statistical report forms, historical trends and at the same time, it has the functions of alarm, system administration, user login, etc. After the mineral SCADA system has been started, the mineral feeding is very stable, the workstation completely supervises and controls the entire process of mineral feeding, and at the same time histori- cal data is shown and questions can be answered conveniently. The system runs well in the MeiShan Concentration Plant of the Shanghai Bao Shan Steel Group.
文摘The control system of an autonomous underwater vehicle （AUV） is introduced. According to control requirements of the AUV, a simple but practical adaptive PID control method is designed The semi-physical simulation is done to test the feasibility of the control system. The neural network idea and the structure of PID controller are referred to design the adaptive PID controller. An intelligent integral is introduced to improve control precision. Compaed with traditional PID con- trollers, the adaptive PID controller has simple structure, good online adjusting ability, fast convergence and good robustness. The simulation experiments also show that the adaptive PID control system has high precision and fine antijamming ability.
文摘The weighing system designed for large structure object is mainly composed of three parts. The part of hydraulic system is made up of hydraulic cylinders, high pressure hydraulic hoses and electric pumps; the part of computer controlling system comprises pressure sensors, displacement sensors, data acquisitions, RS 485 network and the computer controlling model; the part of loading system is composed of the fulcrum structure and the concrete girder. The measurement principle and composition of the weighing system are discussed in this paper. Credibility and security of the weighing system are fully considered during the design phase. The hydraulic system is controlled by pilot operated check valves in case of the sudden loss of system pressure. The states of all gauges and RS485 network are monitored by computer controlling system functioning in different modules. When the system is running incorrectly, it will be switched to manual mode and give alarm. The finite element method is employed to analyze fulcrum structure so that the system has enough intensity to be lifted. Hence the reliability of the whole system is enhanced.
基金Project(2006AA09Z235) supported by the National High Technology Research and Development Program of ChinaProject(CX2009B003) supported by Hunan Provincial Innovation Foundation For Postgraduates,China
文摘Autonomous underwater vehicles (AUVs) navigating in complex sea conditions usually require a strong control system to keep the fastness and stability. The nonlinear trajectory tracking control system of a new AUV in complex sea conditions was presented. According to the theory of submarines,the six-DOF kinematic and dynamic models were decomposed into two mutually non-coupled vertical and horizontal plane subsystems. Then,different sliding mode control algorithms were used to study the trajectory tracking control. Because the yaw angle and yaw angle rate rather than the displacement of the new AUV can be measured directly on the horizontal plane,the sliding mode control algorithm combining cross track error method and line of sight method was used to fulfill its high-precision trajectory tracking control in the complex sea conditions. As the vertical displacement of the new AUV can be measured,in order to achieve the tracking of time-varying depth signal,a stable sliding mode controller was designed based on the single-input multi-state system,which took into account the characteristic of the hydroplane and the amplitude and rate constraints of the hydroplane angle. Moreover,the application of dynamic boundary layer can improve the robustness and control accuracy of the system. The computational results show that the designed sliding mode control systems of the horizontal and vertical planes can ensure the trajectory tracking performance and accuracy of the new AUV in complex sea conditions. The impacts of currents and waves on the sliding mode controller of the new AUV were analyzed qualitatively and quantitatively by comparing the trajectory tracking performance of the new AUV in different sea conditions,which provides an effective theoretical guidance and technical support for the control system design of the new AUV in real complex environment.
基金Supported by the Newcastle University’s Project Account:C0570D2330
文摘In this paper, graphical-user-interface （GUI） software for simulation and fuzzy-logic control of a remotely operated vehicle （ROV） using MATLABTM GUI Designing Environment is proposed. The proposed ROV＇s GUI platform allows the controller such as fuzzy-logic control systems design to be compared with other controllers such as proportional-integral-derivative （PID） and sliding-mode controller （SMC） systematically and interactively. External disturbance such as sea current can he added to improve the modelling in actual underwater environment. The simulated results showed the position responses of the fuzzy-logic control exhibit reasonable performance under the sea current disturbance.
