Performances of belite-rich Portland cement, or HBC （high belite cement）, and the resultant concrete are introduced by comparing with that of alite based PC （Portland cement） and concrete. The comparison study of ...Performances of belite-rich Portland cement, or HBC （high belite cement）, and the resultant concrete are introduced by comparing with that of alite based PC （Portland cement） and concrete. The comparison study of cement properties indicates that HBC possesses the properties of less water demand for normal consistency, better compatibility with water reducer, higher later age strength after 28-day under standard curing temperature of 20 ℃, unique strength gain under elevated curing temperatures of 38-70 ℃, lower hydration heat evolution and temperature rise, lower drying shrinkage and excellent resistance to sulphate attack. These results have been demonstrated by the comparison performance evaluation of concretes prepared by HBC and PC in terms of workability, physical mechanical properties and durability when making high performance high strength concrete and massive concrete.展开更多
In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃...In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃ in 10℃ increments and pH values of 3,7,and 13.Then,the CPB mixture were subjected to rheological tests,thermogravimetric analysis(TG),derivative thermogravimetry analysis(DTG),Fourier-transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM).Results demonstrated that the temperatures had significant effects on the rheological properties of CPB,whereas the effects of pH values were relatively unapparent.Higher temperatures(over 20℃)were prone to bring higher shear stress,yield stress,and apparent viscosity with the same pH value condition.However,an overly high temperature(50℃)cannot raise the apparent viscosity.Non-neutral conditions,for pH values of 3 and 13,could strengthen the shear stress and apparent viscosity at the same temperature.Two different yield stress curves could be discovered by uprising pH values,which also led to apparent viscosity of two various curves under the same temperatures(under 50℃).Microscopically,rheological properties of CPB were affected by temperatures and pH values which enhanced or reduced the cement hydration procedures,rates,products and space structures.展开更多
The reinforcement and stabilization of loess soil are duscussed by using fibers as the reinforcement and cement as the stabilization materials.To study the strength characteristics of loess soil reinforced by modified...The reinforcement and stabilization of loess soil are duscussed by using fibers as the reinforcement and cement as the stabilization materials.To study the strength characteristics of loess soil reinforced by modified polypropylene(MPP) fiber and cement,samples were prepared with six different fiber contents,three different cement contents,three different curing periods and three kinds of fiber length.The samples were tested under submergence and non-submergence conditions for the unconfined compressive strength(UCS),the splitting tensile strength and the compressive resilient modulus.The results indicated that combined reinforcement by PP fiber and cement could significantly improve the early strength of loess to 3.65–5.99 MPa in three days.With an increase in cement content,the specimens exhibited brittle fracture.However,the addition of fibers gradually modified the mode of fracture from brittle to ductile to plastic.The optimal dosage of fiber to reinforce loess was in the range of 0.3%–0.45% and the optimum fiber length was 12 mm,for which the unconfined compressive strength and tensile strength reached their maxima.Based on the analysis of failure properties,cement-reinforced loess specimens were susceptible to brittle damage under pressure,and the effect of modified polypropylene fiber as the connecting "bridge" could help the specimens achieve a satisfactory level of ductility when under pressure.展开更多
A numerical model to simulate the bed degradation process in a straight alluvial channel with respect to time and distance is introduced. The simulation takes into account the effect of non uniformity of the bed ma...A numerical model to simulate the bed degradation process in a straight alluvial channel with respect to time and distance is introduced. The simulation takes into account the effect of non uniformity of the bed material, and variations in the dimension of bed forms. The model predicts the changes in the grain size distribution with the time and space during degradation process. The numerical model proposes that the armoring process in degrading channels does not depend only on hydraulic characteristics of the flow but also on variation in the grain size distribution of sediments on the bed. The model was applied and compared with the results obtained from experiments conducted in 24 m recirculating flume for two sizes of sand; a good agreement was found between observed and calculated values.展开更多
Disintegration of rock is one of the primary processes of soil formation and geomorphology and is affected considerably by water and heat.This study focused on the disintegration characteristics under laboratory condi...Disintegration of rock is one of the primary processes of soil formation and geomorphology and is affected considerably by water and heat.This study focused on the disintegration characteristics under laboratory conditions of typical purple mudstone from the Tuodian group of Jurassic red beds(J3t) in Tuodian Town,Shuangbai county,Yunnan Province of southern China.The fresh mudstone was subjected to alternating applications of water,heat and hydrothermal interaction during five treatments:wetting-drying(WD),saturation(ST),refrigeration-heating(RH),a combination of wetting-drying and refrigeration-heating(WDRH),and a combination of saturation and refrigeration-heating(STRH).Each treatment was run in twenty-four cycles.The results showed that there are three types of disintegration:collapsing disintegration,exfoliation disintegration and imperceptible disintegration.The cumulative disintegration rate(percentage of cumulative disintegrated mass to the initiative sample mass passed through a 2 mm sieve) produced a 'S'-shape function when related to treatment cycle time and closely fit a logistic model(R2 > 0.99).The rank order of the cumulative disintegration rate resulting from the five treatments was as the following:WDRH > STRH > ST > WD > RH.Because of alternating periods of moisture and dryness,WD caused the most disintegration,while RH alone resulted in imperceptible disintegration.Additionally,there was a negative correlation between the disintegration rate of each treatment cycle(percentage of disintegrated mass to the treated sample mass) and treatment cycle number.There was a positive correlation between this rate and temperature change under moist conditions,indicating that a change in temperature greatly accelerates the disintegration of parent rock when water was supplied.展开更多
文摘Performances of belite-rich Portland cement, or HBC （high belite cement）, and the resultant concrete are introduced by comparing with that of alite based PC （Portland cement） and concrete. The comparison study of cement properties indicates that HBC possesses the properties of less water demand for normal consistency, better compatibility with water reducer, higher later age strength after 28-day under standard curing temperature of 20 ℃, unique strength gain under elevated curing temperatures of 38-70 ℃, lower hydration heat evolution and temperature rise, lower drying shrinkage and excellent resistance to sulphate attack. These results have been demonstrated by the comparison performance evaluation of concretes prepared by HBC and PC in terms of workability, physical mechanical properties and durability when making high performance high strength concrete and massive concrete.
基金Project(2019zzts678)supported by the Fundamental Research Funds for the Central Universities,China。
文摘In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃ in 10℃ increments and pH values of 3,7,and 13.Then,the CPB mixture were subjected to rheological tests,thermogravimetric analysis(TG),derivative thermogravimetry analysis(DTG),Fourier-transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM).Results demonstrated that the temperatures had significant effects on the rheological properties of CPB,whereas the effects of pH values were relatively unapparent.Higher temperatures(over 20℃)were prone to bring higher shear stress,yield stress,and apparent viscosity with the same pH value condition.However,an overly high temperature(50℃)cannot raise the apparent viscosity.Non-neutral conditions,for pH values of 3 and 13,could strengthen the shear stress and apparent viscosity at the same temperature.Two different yield stress curves could be discovered by uprising pH values,which also led to apparent viscosity of two various curves under the same temperatures(under 50℃).Microscopically,rheological properties of CPB were affected by temperatures and pH values which enhanced or reduced the cement hydration procedures,rates,products and space structures.
基金Project(050101)supported by Horizontal Research Foundation of PLA Air Force Engineering University,ChinaProject(51478462)supported by the National Natural Science Foundation of China
文摘The reinforcement and stabilization of loess soil are duscussed by using fibers as the reinforcement and cement as the stabilization materials.To study the strength characteristics of loess soil reinforced by modified polypropylene(MPP) fiber and cement,samples were prepared with six different fiber contents,three different cement contents,three different curing periods and three kinds of fiber length.The samples were tested under submergence and non-submergence conditions for the unconfined compressive strength(UCS),the splitting tensile strength and the compressive resilient modulus.The results indicated that combined reinforcement by PP fiber and cement could significantly improve the early strength of loess to 3.65–5.99 MPa in three days.With an increase in cement content,the specimens exhibited brittle fracture.However,the addition of fibers gradually modified the mode of fracture from brittle to ductile to plastic.The optimal dosage of fiber to reinforce loess was in the range of 0.3%–0.45% and the optimum fiber length was 12 mm,for which the unconfined compressive strength and tensile strength reached their maxima.Based on the analysis of failure properties,cement-reinforced loess specimens were susceptible to brittle damage under pressure,and the effect of modified polypropylene fiber as the connecting "bridge" could help the specimens achieve a satisfactory level of ductility when under pressure.
文摘A numerical model to simulate the bed degradation process in a straight alluvial channel with respect to time and distance is introduced. The simulation takes into account the effect of non uniformity of the bed material, and variations in the dimension of bed forms. The model predicts the changes in the grain size distribution with the time and space during degradation process. The numerical model proposes that the armoring process in degrading channels does not depend only on hydraulic characteristics of the flow but also on variation in the grain size distribution of sediments on the bed. The model was applied and compared with the results obtained from experiments conducted in 24 m recirculating flume for two sizes of sand; a good agreement was found between observed and calculated values.
基金supported by National Natural Science Foundation of China (Grant No.40971168)National Basic Research Program of China (973 Program) (Grant No. 2007CB407206)
文摘Disintegration of rock is one of the primary processes of soil formation and geomorphology and is affected considerably by water and heat.This study focused on the disintegration characteristics under laboratory conditions of typical purple mudstone from the Tuodian group of Jurassic red beds(J3t) in Tuodian Town,Shuangbai county,Yunnan Province of southern China.The fresh mudstone was subjected to alternating applications of water,heat and hydrothermal interaction during five treatments:wetting-drying(WD),saturation(ST),refrigeration-heating(RH),a combination of wetting-drying and refrigeration-heating(WDRH),and a combination of saturation and refrigeration-heating(STRH).Each treatment was run in twenty-four cycles.The results showed that there are three types of disintegration:collapsing disintegration,exfoliation disintegration and imperceptible disintegration.The cumulative disintegration rate(percentage of cumulative disintegrated mass to the initiative sample mass passed through a 2 mm sieve) produced a 'S'-shape function when related to treatment cycle time and closely fit a logistic model(R2 > 0.99).The rank order of the cumulative disintegration rate resulting from the five treatments was as the following:WDRH > STRH > ST > WD > RH.Because of alternating periods of moisture and dryness,WD caused the most disintegration,while RH alone resulted in imperceptible disintegration.Additionally,there was a negative correlation between the disintegration rate of each treatment cycle(percentage of disintegrated mass to the treated sample mass) and treatment cycle number.There was a positive correlation between this rate and temperature change under moist conditions,indicating that a change in temperature greatly accelerates the disintegration of parent rock when water was supplied.
