Thermal modeling of underwater friction stir welding of high strength aluminum alloy

The thermal modeling of underwater friction stir welding （FSW） was conddcted with a three-dimensional heat transfer model. The vaporizing characteristics of water were analyzed to illuminate the boundary conditions of underwater FSW. Temperature dependent properties of the material were considered for the modeling. FSW experiments were carried out to validate the calculated results, and the calculated results showed good agreement with the experimental results. The results indicate that the maximum peak temperature of underwater joint is significantly lower than that of normal joint, although the surface heat flux of shoulder during the underwater FSW is higher than that during normal FSW. For underwater joint, the high-temperature distributing area is dramatically narrowed and the welding thermal cycles in different zones are effectively controlled in contrast to the normal joint.

济北地热田地质特征

济南地热田热储层为古生界奥陶系石灰岩,盖层为新生界第四系、新近系、古近系、二叠系和石炭系;热源为沿区内深大断裂上涌的大地热流.经地热钻孔揭露,地下热水水温57℃左右,水化学类型为SO4-Ca型,矿化度3～6g/L,是具有医疗价值的热矿水.单井可采资源量为2585.52m3/d,折合标准煤16.1t/d,在100年内所放的总热量1.72×1016J.依法科学合理的开发济河地热资源必将为济南市区北跨、招商引资、发展绿色高效农业等都有着十分重要的意义.

Microscopic phase-field modeling of atomic anti-site behaviors in precipitation progress of Ni_3(AlFe)

The effects of temperature on atomic anti-site behaviors in L12-Ni3(AlFe) phases were studied using microscopic phase-field dynamic model in precipitation progress of Ni75Al20Fe5 alloy.The results show that with the increase of temperature,the formation of NiAl and AlNi anti-sites is much easier in Ni3(AlFe),and Ni and Al anti-site atoms show clearly stronger temperature-dependent than Fe anti-site atoms.The evolution progress of anti-site atoms is completed at the initial growth stage of L12-Ni3(AlFe) phases.The site occupation probabilities of Ni atoms on the sublattice A(NiNi,face centers sites of FCC),and Al and Fe atoms on the sublattice B(AlAl and FeAl,corners sites of FCC) all present the degressive tendency with the temperature increasing.Fe atoms mainly prefer to occupy the Al sublattice at the whole temperature range.

Electrostatic Enhancement of Coalescence of Oil Droplets(in Nanometer Scale) in Water Emulsion

Oil droplets in nanometer scale which are dispersed in water cannot be separated easily. An attractive technique is carried out by electrical phenomena to demulsify oil in water emulsion. In this research, non-uniform electric field or dielectrophoresis （DEP） is applied to remove sunflower oil （which is dispersed in the water）. Effectsof temperature, time and voltage （using AC-electric field） were considered to get the highest DEP-force （Fdi） and the best results. The oil particles sizes with average of approximately 76 nm have been shown using a ZetaSizer Nano ZS, Model ZEN 1600 （Malvem Instrument Ltd.）. The maximum separation efficiency of 85% is obtained at the optimum temperature of 38 ℃ and voltage of 3000 V.

Water Intake and Utilization in Mithun (Bos frontalis):Effect of Environmental Temperature,Rearing System and Concentrate Feed Supplement

Seasonal and sexual variations as well as the effect of dry feed supplement on total drinking water intake and its utilization were observed in mithun （Bosfrontalis） - a semi-wild animal found in North Eastern Hill Region （NEHR） of India. In a completely randomized design, twelve adult mithuns （B. frontalis） as per their sex and body weight were assigned in two different rearing systems （free grazing and free grazing with dry concentrate feed supplementation）, and ten growing male mithuns as per their body weight assigned in two different levels of dry concentrate feed supplementation （1.o kg and 2.0 kg dry concentrate feeds on green forage based diet） and in two different seasons （summer and winter）. It was observed that the environmental temperature had a significant effect on drinking water intake by mithuns. Drinking water consumption （per unit of body weight） was significantly （P 〈 0.05） higher in summer than in winter. Supplementation of concentrate feed on free grazing animals resulted in increase in water consumption. Total water consumption （drinking as well as performed water） was found to be 15.18 litres per 100 kg body weight by growing mithun. Feed dry matter and digestible nutrient intakes by growing mithun were observed to be increased with the increase of supplementation of dry concentrate feed. Roughage to concentrate ratio did not affect the nutrient digestibility. Mithun calves drank an average of 4.30 litres water for each kg of dry matter intake. Metabolic water was significantly （P〈0.01） increased with the increase of supplementation of concentrate feed whereas water turn over, which depends upon the body weight of the animals, did not differ significantly on offering of lower or higher level of dry feed. Faecal water loss of growing mithun was decreased with the increase in intake of concentrate feed and was estimated to be 33 - 46 % of total water intake. Excretion of water through faeces of mithun was about 3.8 % of body weight. It could, therefore, be inferred that water intake by mithun varied with seasons, rearing systems and dry feed consumption. As far as the water nutrition is concerned, it is needed to give an attention while feeding mithun in summer with dry feed supplementation under semi-intensive system of rearing.

Influence of CaO-based expansive agent,superabsorbent polymers and curing temperature on pore structure evolution of early-age cement paste

Cracks easily generate in concrete at early age owing to the shrinkage deformation.CaO-based expansion agent(CEA)and superabsorbent polymers(SAP)have been extensively used for the mitigation of concrete shrinkage.The macroscopic properties of concrete are highly determined by the microstructure.In this study,the influence of CEA and SAP addition on the pore structure evolution of cement paste under different curing temperatures was evaluated via low-field nuclear magnetic resonance spectroscopy.Test results indicated that,in cement paste,a higher CEA content led to a higher porosity and a larger most probable pore diameter(MPPD).Meanwhile,SAP addition increased the porosity and MPPD of CEA cement paste at early age but decreased them after 7 d,and a higher SAP content always brought a higher porosity and MPPD.Furthermore,the addition of SAP led to a lower porosity and MPPD of CEA cement paste than that of plain cement paste after 14 d.Moreover,the porosity and MPPD of CEA cement paste decreased first and subsequently increased as the curing temperature raised.

The Coolibility of Melt Pool in PWR Lower Head - Results of LIVE Experiments

The LIVE （Late In-Vessel Phase Experiments） test program investigates in-vessel melt pool behaviour and cooling strategies for in-vessel corium retention during severe accidents in light water reactors （LWR）. The main part of the LIVE facility is a 1：5 scaled semi-spherical lower head of a typical pressurized water reactor. Up to now, LIVE experiments have been performed in different initial external cooling conditions, melt volumes and internal heat generations. At present the well-known simulant material KNO3-NaNO3 in non-eutectic composition （80 mole% KNO3-20 mole% NaNO3） and in eutectic composition （50 mole% KNO3- 50 mole% NaNO3） is used in the live program. The 3D heat flux distribution through vessel wall, melt pool temperature, crust thickness and the pool melt composition can be measured or determined. Extensive results have been obtained concerning the melt pool thermal hydraulic behaviour in transient and in steady state conditions.

Numerical Simulation of Coseismic Response and Its Mechanism of Well Water Temperature to Farfield Strong Earthquakes1

Heat flow is inevitably accompanied by temperature change,thus,the water temperature coseismic response during earthquake activity should also obey the laws of thermodynamics.Taking the M S8.0 Wenchuan,Sichuan,China earthquake and the M9.0Tohoku,Japan earthquake as an example,and based on the data of water temperature coseismic responses observed in well ZK26 in Haikou,Hainan Province,China,we investigate the relationship between well water temperature change and heat transfer in the coseismic response process and the relevant thermodynamic mechanism by using the numerical simulation method for thermodynamic equations.Then,through forward modeling,we obtain several simulation curves of water temperature change in response to earthquakes along the well depth at different times.The simulated curves of water temperature change approximately fit the observed curves.Consequently,based on the variation of temperature,we find that the modes of well water temperature coseismic response( ascending,descending or stable) are related to factors such as the location of sensors,distribution and location of heat sources,the span between sensors and heat sources.

Impact of Climate Change on Rice Water Demand and Food Security： Case of Thailand and Vietnam

Water plays an important role in food production especially rice. Rice productivity depends greatly on sufficient water to meet evaporative demand and soil moisture. It is certain thalL rice, the most important crop of Thailand and Vietnam, is vulnerable to climate change. This paper proposes an analysis on the impact of climate on rice water requirement and food security in Thailand and Vietnam. Water demand, yield and production of rice were computed under the changed surface air temperature for three time slices, namely 2020s, 2050s and 2080s. Food security was analyzed from rice supply （calculated milled-rice product, rice stock, and imports） and demand （domestic uses from population growth, exports to world market, domestic seed and other uses）. The result showed that, under the higher surface air temperature scenario, water requirement office in Thailand and Vietnam could increase by 1.8 times in the end of the 21 st century. Production of rice dropped by declined yield. Thailand and Vietnam which is the world largest rice exporter in last decades will face the rice shortage in 2080s and 2030s respectively.