[Objective] The aim was to study the effect of salt solution on characteristics of soil infiltration, and to provide references for the further studies on the effect of water quality on soil infiltration characteristi...[Objective] The aim was to study the effect of salt solution on characteristics of soil infiltration, and to provide references for the further studies on the effect of water quality on soil infiltration characteristics and its mechanism. [Method] With the NaCl, CaCl2 solutions as the main test materials, the effect of different water quality and salt solution concentration on soil infiltration was studied under one-dimensional vertical ponded water infiltration at laboratory. [Result] The solution concentration could affect the infiltration performance. The trends of the infiltration rates, cumulative infiltrations and wetting front migration distances were all 50 mg/L 100 mg/L 10 mg/L. At the same concentration, the effect of NaCl solution on soil infiltration characteristics was more significant than CaCl2 solution： in the same time, cumulative infiltration and wetting front migration distance of NaCl solution were greater than CaCl2 solution; compared with NaCl solution, CaCl2 solution took longer time to infiltrate the same amount of water. The dynamic changes of infiltration rate, wetting front and cumulative infiltration were well fitted to the Philip model. [Conclusion] This study only conducted indoor experiment to the infiltration of salt solutions, involving in low concentration and small range. Although it provided some references for the study on the effect of water quality on soil infiltration characteristics and its mechanism, studies in larger areas and with bigger concentrations are demanding.展开更多
UWS （optimized Urea-Water Solution） injection system is required to increase the NH3 conversion efficiency of urea-based SCR （Selective Catalytic Reduction） system of modem automobiles. The focus of the current st...UWS （optimized Urea-Water Solution） injection system is required to increase the NH3 conversion efficiency of urea-based SCR （Selective Catalytic Reduction） system of modem automobiles. The focus of the current study is to do parametric studies by simulation in a three-dimensional model using CFD （Computational Fluid Dynamics） code AVL FIRE. Simulations were carried out to study the characteristics of evaporation and thermolysis UWS considering the effect of injection velocity, duration of injection, injection angle and for different types of injection. In the case of the injection velocities up to 20-50 m/sec, the ammonia concentration continues to increase. It is found that as the duration injection decreases, the concentration of ammonia increases. In case of continuous injection, the flow rate is less which results in lower velocity of injection, lesser atomization and slower evaporation resulting lesser conversion of UWS into NH3. Shorter duration of injection leads better atomization with increased velocity of injection which results in faster evaporation and thermolysis.展开更多
In order to develop turbulent drag-reducing technology by using an environmentally friendly additive in a water-transporting system,the drag reducing characteristics in a non-ionic surfactant(Oleyldimethylamineoxide,O...In order to develop turbulent drag-reducing technology by using an environmentally friendly additive in a water-transporting system,the drag reducing characteristics in a non-ionic surfactant(Oleyldimethylamineoxide,ODMAO) dilute aqueous solution flowing in a circular pipe of 5 mm diameter have been experimentally investigated with an air-driven fluid resistance test device.The rheological characteristics of the solution have also been examined by a rheometer with a cone-plate flow cell.The results show that the ODMAO solutions are drag-reducing when concentration is 400 ppm or higher,that the critical Reynolds number corresponding to the maximum drag reduction rate increases with both concentration and temperature,and that the maximum drag reduction rate can reach up to 70% in the straight pipe.At low shear rates,the shear viscosity of ODMAO solutions with a relatively high drag-reduction behaves similarly to Newtonian fluids;at above a certain critical shear rate,it is firstly shear-thickening,then shear-thinning.Such shear-rate-dependent characteristics of the shear viscosity are attributed to the different transitions of micellar network structure induced by different shear rates.Relaxation of shear stress after removing an applied constant shear rate at which the solution is in the SIS(shear-induced structure) state is found to be well expressed by a 2-step Maxwell model with a tail relaxation time much shorter than that for a drag-reducing cationic surfactant,which indicates that for the ODMAO solution,a viscoelasticity as strong as a drag-reducing cationic surfactant is not needed to realize turbulent drag-reduction.展开更多
基金Supported by the National Natural Science Foundation of China(40801100,50179035,50609022)the State Key Laboratory Fund Project of Soil Erosion and Dryland Faming on Loess Plateau(10501-177,10501-220)+1 种基金the Discipline Construction Fund of Ludong Universitythe Open Fund for Key Laboratory of Soil,Water and Environmental Conservation in Shandong Province(STKF201011)~~
文摘[Objective] The aim was to study the effect of salt solution on characteristics of soil infiltration, and to provide references for the further studies on the effect of water quality on soil infiltration characteristics and its mechanism. [Method] With the NaCl, CaCl2 solutions as the main test materials, the effect of different water quality and salt solution concentration on soil infiltration was studied under one-dimensional vertical ponded water infiltration at laboratory. [Result] The solution concentration could affect the infiltration performance. The trends of the infiltration rates, cumulative infiltrations and wetting front migration distances were all 50 mg/L 100 mg/L 10 mg/L. At the same concentration, the effect of NaCl solution on soil infiltration characteristics was more significant than CaCl2 solution： in the same time, cumulative infiltration and wetting front migration distance of NaCl solution were greater than CaCl2 solution; compared with NaCl solution, CaCl2 solution took longer time to infiltrate the same amount of water. The dynamic changes of infiltration rate, wetting front and cumulative infiltration were well fitted to the Philip model. [Conclusion] This study only conducted indoor experiment to the infiltration of salt solutions, involving in low concentration and small range. Although it provided some references for the study on the effect of water quality on soil infiltration characteristics and its mechanism, studies in larger areas and with bigger concentrations are demanding.
文摘UWS （optimized Urea-Water Solution） injection system is required to increase the NH3 conversion efficiency of urea-based SCR （Selective Catalytic Reduction） system of modem automobiles. The focus of the current study is to do parametric studies by simulation in a three-dimensional model using CFD （Computational Fluid Dynamics） code AVL FIRE. Simulations were carried out to study the characteristics of evaporation and thermolysis UWS considering the effect of injection velocity, duration of injection, injection angle and for different types of injection. In the case of the injection velocities up to 20-50 m/sec, the ammonia concentration continues to increase. It is found that as the duration injection decreases, the concentration of ammonia increases. In case of continuous injection, the flow rate is less which results in lower velocity of injection, lesser atomization and slower evaporation resulting lesser conversion of UWS into NH3. Shorter duration of injection leads better atomization with increased velocity of injection which results in faster evaporation and thermolysis.
基金supported by the Center of Natural Science and Technology of Japan
文摘In order to develop turbulent drag-reducing technology by using an environmentally friendly additive in a water-transporting system,the drag reducing characteristics in a non-ionic surfactant(Oleyldimethylamineoxide,ODMAO) dilute aqueous solution flowing in a circular pipe of 5 mm diameter have been experimentally investigated with an air-driven fluid resistance test device.The rheological characteristics of the solution have also been examined by a rheometer with a cone-plate flow cell.The results show that the ODMAO solutions are drag-reducing when concentration is 400 ppm or higher,that the critical Reynolds number corresponding to the maximum drag reduction rate increases with both concentration and temperature,and that the maximum drag reduction rate can reach up to 70% in the straight pipe.At low shear rates,the shear viscosity of ODMAO solutions with a relatively high drag-reduction behaves similarly to Newtonian fluids;at above a certain critical shear rate,it is firstly shear-thickening,then shear-thinning.Such shear-rate-dependent characteristics of the shear viscosity are attributed to the different transitions of micellar network structure induced by different shear rates.Relaxation of shear stress after removing an applied constant shear rate at which the solution is in the SIS(shear-induced structure) state is found to be well expressed by a 2-step Maxwell model with a tail relaxation time much shorter than that for a drag-reducing cationic surfactant,which indicates that for the ODMAO solution,a viscoelasticity as strong as a drag-reducing cationic surfactant is not needed to realize turbulent drag-reduction.
