ф500～1000mm管材超声波水浸法自动探伤设备

大直径管材水浸法超声波自动化探伤设备由探伤主机、辊道机械传动系统、电气控制系统、水路系统、超声波探伤仪及计算机系统组成。所研制设备采用水浸法,通过产生横波进行全面扫查,然后由超声波探伤仪判别,最后由计算机记录缺陷大小并报警,最终实现超声波自动化探伤要求。

WAVE TRANSFORMATION AND BREAKING OVER A RECTANGULAR STEP

An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,free surface and solid boundary in this paper.The characteristics of waves propagating over a step have been investigated by this numerical model.The breaker wave height is determined depending on the kinetic criterion.The numerical model is verified by laboratory experiments,and the empirical formula for the damping of wave height due to breaking is also given by experiments.

Simulation of clinker grinding circuits of cement plant based on process models calibrated using GA search method

Particle size distributions of obtained samples from several sampling campaigns were determined and raw data were mass balanced before being used in simulation studies.After determination of breakage function,selection function,Bond work index,residence time distribution parameters,and Whiten's model parameters for air separators and diaphragms between the two compartments of tube ball mills,performance of the circuits was simulated for given throughputs and feed particle size distribution.Whiten's model parameters were determined by GA(genetic algorithm) toolbox of MATLAB software.Based on implemented models for modeling and simulation,optimization of circuits was carried out.It increased nearly 10.5% and 15.8% in fresh feed capacity input to each tube ball mill.In addition,circulating load ratios of circuits are modified to 118% and 127% from low level of 57% and 22%,respectively,and also cut points of air separators are adjusted at 30 and 40 μm from high range of 53 and 97 μm,respectively.All applications helped in well-operation and energy consumption reduction of equipments.

Algorithmic Procedure to Design Water Utilization Systems Featuring Multiple Contaminants in Process Plants

This paper introduces a non-iterative algorithmic procedure to design water utilization networks with multiple contaminants in process plants. According to the water pinch analysis rules, the processes in water utilization systems were first divided into three groups, then water-supply priority algorithm was proposed. The results of case studies showed that the water networks designed by this method gave water consumption lower than that estimated by other approaches. In addition, the procedure was subject to no limitation on the problem scale.

“Co-culture Engineering”for Enhanced Phytoremediation of Metal Contaminated Soils

A co-culture of two plant materials, Astragalus sinicus L., a leguminous plant with concomitant nodules, and Elsholtzia splendens Naki-a Cu accumulator, along with treatments of a chelating agent (EDTA), root excretions (citric acid), and a control with E. splendens only were used to compare the mobility of heavy metals in chelating agents with a co-culture and to determine the potential for co-culture phytoremediation in heavy metal contaminated soils. The root uptake for Cu, Zn, and Pb in all treatments was significantly greater (P ＜ 0.05) than that of the control treatment. However with translocation in the shoots, only Cu, Zn, and Pb in plants grown with the EDTA treatment and Zn in plants cocropped with the A. sinicus treatment increased significantly (P ＜ 0.05). In addition, when a co-culture in soils with heavy and moderate contamination was compared, for roots in moderately contaminated soils only Zn concentration was significantly less (P ＜ 0.05) than that of heavily contaminated soils, however, Cu, Zn, and Pb concentrations of shoots were all significantly lower (P ＜ 0.05). Overall, this 'co-culture engineering' could be as effective as or even more effective than chelating agents, thereby preventing plant metal toxicity and metal leaching in soils as was usually observed in chelate-enhanced phytoremediation.

Prediction of Debris-flow Danger Area by Combining Hydrological and Inundation Simulation Methods

Debris flows have caused serious human casualties and economic losses in the regions strongly affected by the Ms8.0 Wenchuan earthquake of 2oo8. Debris flow mitigation and risk assessment is a key issue for reconstruction. The existing methods of inundation simulation are based on historical disasters and have no power of prediction. The rain- flood method can not yield detailed flow hydrograph and does not meet the need of inundation simulation. In this paper, the process of water flow was studied by using the Arc-SCS model combined with hydraulic method, and then the debris flow runoff process was calculated using the empirical formula combining the result from Arc-SCS. The peak discharge and runoff duration served as input of inundation simulation. Then, the dangerous area is predicted using kinematic wave method and Manning equation. Taking the debris flow in Huashiban gully in Beichuan County, Sichuan Province, China on 24 Sep. 2oo8 as example, the peak discharge of water flow and debris flow were calculated as 35.52 m3·s-1 and 215.66 m3·s-, with error of 4.15% compared to the measured values. The simulated area of debris-flow deposition was 161,500 m2, vs. the measured area of 144,097 m2, in error of 81.75%. The simulated maximum depth was 12.3 m, consistent with the real maximum depth between lO and 15 m according to the field survey. The minor error is mainly due to the flow impact on buildings and variations in cross-section configuration. The present methodology can be applied to predict debrisflow magnitude and evaluate its risk in other watersheds inthe earthquake area.

Preparation of Cu nanoparticles with NaBH_4 by aqueous reduction method

Cu nanoparticles were prepared by reducing Cu2＋ ions with NaBH4 in alkaline solution. The effects of NaBH4 concentration and dripping rate on the formation of Cu nanoparticles were studied. The optimum conditions are found to be 0.2 mol/L Cu2＋, solution with pH=12, temperature of 313 K and 1% gelatin as dispersant, to which 0.4 mol/L NaBH4 is added at a dripping rate of 50 mL/min. NH3-H2O is found to be the optimal complexant to form the Cu precursor. A series experiments were conducted to study the reaction process at different time points.

A practical predictive control algorithm for integral processes and a case study in boiler level system

The Dynamic Matrix Control （DMC） algorithm tor integral processes is investigated in this paper. The reason why the original DMC algorithm cannot be applied to these processes is analyzed. The shifting matrix is transformed into another form and the corresponding theorem is proved, then its applicable range is extended. Compared with other algorithms on the integral processes, this algorithm is more practical and simple to implement. Simulation results also prove its validity. Applying this algorithm, we succeed in the control of the boiler level system in power units.

Simulation of Non-isothermal Injection Molding for a Non-Newtonian Fluid by Level Set Method

A non-isothermal injection molding process for a non-Newtonian viscous pseudoplastic fluid is simulated.A conservative interface capturing technique and the flow field solving method are coupled to perform a dynamic simulation.The validity of the numerical method is verified by a benchmark problem.The melt interface evolution versus time is captured and the physical quantities such as temperature,velocity and pressure at each time step are obtained with corresponding analysis.A"frozen skin"layer with the thickness increasing versus time during the injection process is found.The fact that the"frozen skin"layer can be reduced by increasing the injection velocity is numerically verified.The fountain flow phenomenon near the melt interface is also captured.Moreover,comparisons with the non-isothermal Newtonian case show that the curvatures of the interface arcs and the pressure contours near the horizontal mid-line of the cavity for the non-Newtonian pseudoplastic case is larger than that for the Newtonian case.The velocity profiles are different at different positions for the non-Newtonian pseudoplastic case,while in the case of Newtonian flow the velocity profiles are parabolic and almost the same at different positions.

Tidal Analysis of High and Low Water Data

The harmonic analysis method based on high and low water levels is discussed in this paper. In order to make full use of the information of high and low water observations (the time derivative of water level at the observation time is zero), the weight coefficient, w, is introduced to control the importance of the part related to this information in the error formula. The major diurnal constituents, O 1 and K 1, and semi diurnal constituents, N 2, M 2 and S 2 are selected directly from the monthly data analysis, and some other important constituents, P 1, ν 2 and K 2, are included as the inferred constituents. The obtained harmonic constants of the major constituents are very close to those obtained from the analysis of hourly data, and this shows that high and low water data can be used to extract tidal constants with high accuracy. The analysis result also shows that the inference and the weighting coefficient are important in the high and low water data analysis, and it is suggested that w ≥1 should be taken in monthly high and low water data analysis. This analysis method can be used directly to analyze altimetric data with w =0.

A Genetic Fuzzy Analytical Hierarchy Process Based Projection Pursuit Method for Selecting Schemes of Water Transportation Projects

The optimal selection of schemes of water transportation projects is a process of choosing a relatively optimal scheme from a number of schemes of water transportation programming and management projects, which is of importance in both theory and practice in water resource systems engineering. In order to achieve consistency and eliminate the dimensions of fuzzy qualitative and fuzzy quantitative evaluation indexes, to determine the weights of the indexes objectively, and to increase the differences among the comprehensive evaluation index values of water transportation project schemes, a projection pursuit method, named FPRM-PP for short, was developed in this work for selecting the optimal water transportation project scheme based on the fuzzy preference relation matrix. The research results show that FPRM-PP is intuitive and practical, the correction range of the fuzzy rained is both stable and accurate; preference relation matrix A it produces is relatively small, and the result obtherefore FPRM-PP can be widely used in the optimal selection of different multi-factor decision-making schemes.

Combined Action of Uniform Flow and Oscillating Flow Around Marine Riser at Low Keulegan-Carpenter Number

With the increase of petroleum and gas production in deep ocean, marine risers of circular cylinder shape are widely used in the offshore oil and gas platform. In order to research the hydrodynamic performance of marine risers, the dynamic mesh technique and User-Defined Function(UDF) are used to simulate the circular cylinder motion. The motion of a transversely oscillating circular cylinder in combination of uniform flow and oscillating flow is simulated. The uniform flow and oscillating flow both are in x direction. SIMPLE algorithm is used to solve the Navier-Stokes equations. The User-Defined Function is used to control the cylinder transverse vibration and the inlet flow. The lift and drag coefficient changing with time and the map of vorticity isolines at different phase angle are obtained. Force time histories are shown for uniform flow at Reynolds number(Re) of 200 and for the combination of uniform and oscillating flows. With the increase of amplitude of oscillating flow in combined flow, the change of lift amplitude is not sensitive to the the change of cylinder oscillating frequency. Lift amplitude increases with the increase of oscillating flow amplitude in the combined flow, but there is no definite periodicity of the lift coefficient. The drag and inertia force coefficients change when the maximum velocity of the oscillating flow increases in the combined flow. The vortex shedding near the circular cylinder shows different characteristics.

Simulation of Current Structure Interactions Using Least-Squares Finite Element Method

The objective of this paper is to investigate the condition number of various formulations of LSFEM （least-squares finite element method） for SWE （shallow-water equations）, and develop a better conditioned shallow-water model to simulate current structure interactions. Various formulations of LSFEM for a two-dimensional vertically-averaged non-viscous shallow-water equations can be constructed, depending on the choice of norm, variables, interpolations, and possible treatment of boundary conditions. The condition number of the resulting system of equations is systematically examined and compared. It is found that condition number of the resulting system of equations depends on the choice of variables, interpolations, and size of element （h）. Order reduction （UW） formulations, with introducing auxiliary variables, with low-order interpolation is better conditioned and more efficient than direct （U） formulation with high-order interpolation. However, to resolve large gradients and fine structures of flow filed, high-order methods are generally preferred. The developed shallow-water model is used to simulate flow past an elliptic hump and flow past a cylinder. Computed results are compared with other numerical solutions.

Propane Dehydrogenation over PtSnNa Catalyst Supported on La-ZSM-5 Zeolite

The La-ZSM-5 zeolite with different contents of La was synthesized by the hydrothermal method. The physico-chemical properties of the materials were studied. The results of FT-IR analyses indicated that La might be incorporated into the framework of ZSM-5 zeolite. The NH3-TPD analyses showed that the amount of weak acid sites of the zeolite decreased with a continuously increasing La content. Afterwards, the La-ZSM-5 zeolite was used as the support of PtSnNa catalyst for propane dehydrogenation. The test results revealed that the utilization of La- ZSM-5 zeolite could achieve a high propene conversion, and effectively inhibit the coke formation on the catalyst surface. When the content of La was 0.16%, the catalytic activity and stability of the catalyst got the best of its performance. Besides, the PtSnNa/La （0.16%）-ZSM-5 catalyst is more stable than the conventional PtSnNaLal ZSM-5 catalysts.

Numerical Simulation for Water Entry of a Wedge at Varying Speed by a High Order Boundary Element Method

A high order boundary element method was developed for the complex velocity potential problem. The method ensures not only the continuity of the potential at the nodes of each element but also the velocity. It can be applied to a variety of velocity potential problems. The present paper, however, focused on its application to the problem of water entry of a wedge with varying speed. The continuity of the velocity achieved herein is particularly important for this kind of nonlinear free surface flow problem, because when the time stepping method is used, the free surface is updated through the velocity obtained at each node and the accuracy of the velocity is therefore crucial. Calculation was made for a case when the distance S that the wedge has travelled and time t follow the relationship s=Dtα, where D and α are constants, which is found to lead to a self similar flow field when the effect due to gravity is ignored.

THE MODEL TEST RESEARCH OF HORIZONTAL FORCE ON RIGID SHAFT FURNITURE IN DEEP MINE

The state of deep mine rigid shaft fUrniture horizontal force calculation in China is introduced and the calculating model of horizontal force is determined. Based on the interaction between hoisting vessel and shaft furniture, the vertical mobel test device is built and a large number of model tests and analyses are carried out. At last, the relationship between horizontal force and hoisting end load, hoisting speed or bunton level interval is gained. The three parameters horizontal force calculating equation of beep mine rigid shaft furniture is given and it can guide the design and calculation of shaft engineering.

The Legal Regulations on Dams Construction on International Rivers： The Compliance of the Nile Basin Upstream States of the Regulations

The process of constructing hydraulic projects on international rivers is governed by several legal regulations, among the most important of these regulations are： the Principle of no harm, and the Principle of Prior Notification, protection of the river＇s environment and the Principle of Settling the International Disputes via Peaceful Means, which is considered one of the most important principles called for by the UN Pact, as it provides for adopting the peaceful means by the member states of the organization to settle international disputes through peaceful means, in addition to an applied study on the Nile Basin＇s projects.

Numerical modeling of hydrodynamic changes due to coastal reclamation projects in Xiamen Bay,China

Xiamen Bay in South China has experienced extensive coastal exploitation since the 1950s,resulting in some severe environmental problems.Local authorities now have completed or are implementing many environmental restoration projects.Evaluating the cumulative impact of exploitation and restoration activities on the environment is a complicated multi-disciplinary problem.However,hydrodynamic changes in the bay caused by such coastal projects can be characterized directly and definitively through numerical modeling.This paper assesses the cumulative effect of coastal projects on the hydrodynamic setting using a high-resolution numerical modeling method that makes use of tidal current speeds and the tidal prism as two hydrodynamic indices.Changes in tidal velocity and the characteristics of the tidal prism show that hydrodynamic conditions have declined from 1938 to 2007 in the full-tide area.The tidal current speed and tidal prism have decreased by 40% in the western part of the bay and 20% in the eastern part of the bay.Because of the linear relationship between tidal prism and area,the degraded hydrodynamic conditions are anticipated to be restored to 1972 levels following the completion of current and proposed restoration projects,i.e.33% and 15% decrease in the hydrodynamic conditions of 1938 for the western and eastern parts of the bay,respectively.The results indicate that hydrodynamic conditions can be restored to some extent with the implementation of a sustainable coastal development plan,although a full reversal of conditions is not possible.To fully assess the environmental changes in a region,more indices,e.g.,water quality and ecosystem parameters,should be considered in future evaluations.

Ground stress and its impact on the stability of the surrounding rock in the Lüliang mining area

Ground stress is the fundamental cause of deformation and failure during underground structural engineering. Field stress measurements in the main coal bed in the Lueliang mining area were made by the bore hole, stress relief method. From these data the ground stress distribution of the mining area was obtained. The relationship between the horizontal principal stress and the deformation and failure of a roadway is discussed with an engineering example. The results indicate that horizontal stress dominates in the shallow crust in the Ltiliang mining area. Roadways at different angles to the maximum principal stress have different levels of stress concentration. This leads to a significant difference in stability of the corresponding roadways. These research results provide an important criterion for determining roadway position and direction, stope layout, and roadway support design.

Solving Two-Dimensional Moving-Boundary Problems with Meshless and Level Set Method

During the past decade, increasing attention has been given to the development of meshless methods using radial basis functions for the numerical solution of Partial Differential Equations （PDEs）. A level set method is a promising design tool for tracking, modelling and simulating the motion of free boundaries in fluid mechanics, combustion, computer animation and image processing. In the conventional level set methods, the level set equation is solved to evolve the interface using a capturing Eulerian approach. The solving procedure requires an appropriate choice of the upwind schemes, reinitialization, etc. Our goal is to include Multiquadric Radial Basis Functions （MQ RBFs） into the level set method to construct a more efficient approach and stabilize the solution process with the adaptive greedy algorithm. This paper presents an alternative approach to the conventional level set methods for solving moving-boundary problems. The solution was compared to the solution calculated by the exact explicit lime integration scheme. The examples show that MQ RBFs and adaptive greedy algorithm is a very promising calculation scheme.