The reinforcement and stabilization of loess soil are duscussed by using fibers as the reinforcement and cement as the stabilization materials.To study the strength characteristics of loess soil reinforced by modified...The reinforcement and stabilization of loess soil are duscussed by using fibers as the reinforcement and cement as the stabilization materials.To study the strength characteristics of loess soil reinforced by modified polypropylene(MPP) fiber and cement,samples were prepared with six different fiber contents,three different cement contents,three different curing periods and three kinds of fiber length.The samples were tested under submergence and non-submergence conditions for the unconfined compressive strength(UCS),the splitting tensile strength and the compressive resilient modulus.The results indicated that combined reinforcement by PP fiber and cement could significantly improve the early strength of loess to 3.65–5.99 MPa in three days.With an increase in cement content,the specimens exhibited brittle fracture.However,the addition of fibers gradually modified the mode of fracture from brittle to ductile to plastic.The optimal dosage of fiber to reinforce loess was in the range of 0.3%–0.45% and the optimum fiber length was 12 mm,for which the unconfined compressive strength and tensile strength reached their maxima.Based on the analysis of failure properties,cement-reinforced loess specimens were susceptible to brittle damage under pressure,and the effect of modified polypropylene fiber as the connecting "bridge" could help the specimens achieve a satisfactory level of ductility when under pressure.展开更多
Based on deformation and failure characteristics of the second belt conveyor roadway at level II of Zhuxianzhuang coal mine, laboratory experiments, numerical calculation and field test were adopted to analyze the com...Based on deformation and failure characteristics of the second belt conveyor roadway at level II of Zhuxianzhuang coal mine, laboratory experiments, numerical calculation and field test were adopted to analyze the composition and microstructure of mudstone, the law of mudstone hydration and its strength weakening induced by water, the characteristics of surrounding rock deformation and failure under the action of confined water. Results showed that montmorillonite clay minerals accounted for as much as 76% of mudstone, with a large number of pores existing in the microstructure. Besides, as the molecular structure of montmorillonite changed, mudstone microstructure damage occurred with the macroscopic manifestation of its theological instability. Weakening degree of confined water on residual strength of mudstone was almost 50%. The instability mechanism of soft rock roadway caused by high confined water is that surrounding rock circulates the process of ＂fracture-seepage-mud ding-closed＂ twice, which weakens its strength and leads to roadway instability. A combined support technology, namely the, ＂high-toughness sealing layer ＋ hollow grouting cables ＋ full-length anchoring bolts with deep borehole＂ was proposed. Based on field observation, the soft rock roadway was controlled effectively, which also verified the effectiveness of new control technology for surrounding rock.展开更多
The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of c...The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of cement-soil,presents the factors of influencing on compressive strength,mainly analyses the factors including cement mixing ratio,cement strength grade,curing age,moisture content and soil texture and puts forward some rational proposals at last.展开更多
Rainfall is an important factor to trigger the debris flow.Numerical simulation on the responses of slopes and the initiation of debris flow under rainfall was processed by using the software FLAC2D based on the soil ...Rainfall is an important factor to trigger the debris flow.Numerical simulation on the responses of slopes and the initiation of debris flow under rainfall was processed by using the software FLAC2D based on the soil parameters in Weijia Gully,Beichuan County,Sichuan Province,China.The effects of the slope angle,rainfall intensity,soil parameters on the developments of the stress and pore pressure and deformation of the slope were studied.It indicates that large displacements of the slope are mainly located near the slope toe.With the increase of the rainfall intensity the stability of the slope decreases and so the debris-flow is easy to occur.展开更多
According to the data of preliminary survey, the authors established a landslide geological model,on the basis of analyses on the sensitivity of landslide, tried to simulate and calculate the landslide stability of Sh...According to the data of preliminary survey, the authors established a landslide geological model,on the basis of analyses on the sensitivity of landslide, tried to simulate and calculate the landslide stability of Shuitianba with the method of transfer coefficient when it is under different strength parameters, and study the landslide mechanism. The results show that it is sensitive to the effects of shear strength parameters of sliding zone and groundwater level on landslide stability safety coefficient, which provides reliable basis for calculation of landslide stability.展开更多
基金Project(050101)supported by Horizontal Research Foundation of PLA Air Force Engineering University,ChinaProject(51478462)supported by the National Natural Science Foundation of China
文摘The reinforcement and stabilization of loess soil are duscussed by using fibers as the reinforcement and cement as the stabilization materials.To study the strength characteristics of loess soil reinforced by modified polypropylene(MPP) fiber and cement,samples were prepared with six different fiber contents,three different cement contents,three different curing periods and three kinds of fiber length.The samples were tested under submergence and non-submergence conditions for the unconfined compressive strength(UCS),the splitting tensile strength and the compressive resilient modulus.The results indicated that combined reinforcement by PP fiber and cement could significantly improve the early strength of loess to 3.65–5.99 MPa in three days.With an increase in cement content,the specimens exhibited brittle fracture.However,the addition of fibers gradually modified the mode of fracture from brittle to ductile to plastic.The optimal dosage of fiber to reinforce loess was in the range of 0.3%–0.45% and the optimum fiber length was 12 mm,for which the unconfined compressive strength and tensile strength reached their maxima.Based on the analysis of failure properties,cement-reinforced loess specimens were susceptible to brittle damage under pressure,and the effect of modified polypropylene fiber as the connecting "bridge" could help the specimens achieve a satisfactory level of ductility when under pressure.
基金the Natural Science Foundation of Jiangsu Province(No.BK20141130)the Fundamental Research Funds for the Central Universities(No.2014QNB27)
文摘Based on deformation and failure characteristics of the second belt conveyor roadway at level II of Zhuxianzhuang coal mine, laboratory experiments, numerical calculation and field test were adopted to analyze the composition and microstructure of mudstone, the law of mudstone hydration and its strength weakening induced by water, the characteristics of surrounding rock deformation and failure under the action of confined water. Results showed that montmorillonite clay minerals accounted for as much as 76% of mudstone, with a large number of pores existing in the microstructure. Besides, as the molecular structure of montmorillonite changed, mudstone microstructure damage occurred with the macroscopic manifestation of its theological instability. Weakening degree of confined water on residual strength of mudstone was almost 50%. The instability mechanism of soft rock roadway caused by high confined water is that surrounding rock circulates the process of ＂fracture-seepage-mud ding-closed＂ twice, which weakens its strength and leads to roadway instability. A combined support technology, namely the, ＂high-toughness sealing layer ＋ hollow grouting cables ＋ full-length anchoring bolts with deep borehole＂ was proposed. Based on field observation, the soft rock roadway was controlled effectively, which also verified the effectiveness of new control technology for surrounding rock.
文摘The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of cement-soil,presents the factors of influencing on compressive strength,mainly analyses the factors including cement mixing ratio,cement strength grade,curing age,moisture content and soil texture and puts forward some rational proposals at last.
文摘Rainfall is an important factor to trigger the debris flow.Numerical simulation on the responses of slopes and the initiation of debris flow under rainfall was processed by using the software FLAC2D based on the soil parameters in Weijia Gully,Beichuan County,Sichuan Province,China.The effects of the slope angle,rainfall intensity,soil parameters on the developments of the stress and pore pressure and deformation of the slope were studied.It indicates that large displacements of the slope are mainly located near the slope toe.With the increase of the rainfall intensity the stability of the slope decreases and so the debris-flow is easy to occur.
文摘According to the data of preliminary survey, the authors established a landslide geological model,on the basis of analyses on the sensitivity of landslide, tried to simulate and calculate the landslide stability of Shuitianba with the method of transfer coefficient when it is under different strength parameters, and study the landslide mechanism. The results show that it is sensitive to the effects of shear strength parameters of sliding zone and groundwater level on landslide stability safety coefficient, which provides reliable basis for calculation of landslide stability.
