This paper summarizes the development of hydro-projects in China,blended with an international perspective.It expounds major technical progress toward ensuring the safe construction of high dams and river harnessing,a...This paper summarizes the development of hydro-projects in China,blended with an international perspective.It expounds major technical progress toward ensuring the safe construction of high dams and river harnessing,and covers the theorization of uneven non-equilibrium sediment transport,inter-basin water diversion,giant hydro-generator units,pumped storage power stations,underground caverns,ecological protection,and so on.展开更多
In order to investigate the feasibility of monitoring the fatigue cracks in turbine blades using acoustic emission (AE) technique, the AE characteristics of fatigue crack growth were studied in the laboratory. And the...In order to investigate the feasibility of monitoring the fatigue cracks in turbine blades using acoustic emission (AE) technique, the AE characteristics of fatigue crack growth were studied in the laboratory. And the characteristics were compared with those of background noise received from a real hydraulic turbine unit. It is found that the AE parameters such as the energy and duration can qualitatively describe the fatigue state of the blades. The correlations of crack propagation rates and acoustic emission count rates vs stress intensity factor (SIF) range are also obtained. At the same time, for the specimens of 20SiMn under the given testing conditions, it is noted that the rise time and duration of events emitted from the fatigue process are lower than those from the background noise; amplitude range is 49-74 dB, which is lower than that of the noise (90-99 dB); frequency range of main energy of crack signals is higher than 60 kHz while that in the noise is lower than 55 kHz. Thus, it is possible to extract the useful crack signals from the noise through appropriate signal processing methods and to represent the crack status of blade materials by AE parameters. As a result, it is feasible to monitor the safety of runners using AE technique.展开更多
Recently, small hydroelectric generators have gained attention as a further development in water turbine technology for ultra low head drops in open channels. The authors have evaluated the application of cross-flow w...Recently, small hydroelectric generators have gained attention as a further development in water turbine technology for ultra low head drops in open channels. The authors have evaluated the application of cross-flow water turbines in open channels as an undershot type after removing the casings and guide vanes to substantially simplify these water turbines. However, because undershot cross-flow water turbines are designed on the basis of cross-flow water turbine runners used in typical pipelines, it remains unclear whether the number of blades has an effect on the performance or flow fields. Thus, in this research, experiments and numerical analyses are employed to study the performance and flow fields of undershot cross-flow water turbines with varying number of blades. The findings show that the turbine output and torque are lower, the fluctuation is significantly higher, and the turbine efficiency is higher for runners with 8 blades as opposed to those with 24 blades.展开更多
Distortion often appears at the corners of heavy turbine blade castings during heat treatment processes, so a great machining allowance is generally set in production which directly results in cost increase. In this p...Distortion often appears at the corners of heavy turbine blade castings during heat treatment processes, so a great machining allowance is generally set in production which directly results in cost increase. In this paper, a novel real-time measuring technology is developed for non-contact measuring the deformation behavior of heavy steel castings in heat treatment process. It was employed to measure the distortion and the temperature field of a batch of heavy turbine blade castings at cooling stage in normalizing process. Three inflection points appear in the distortion-time curves, and the residual distortion is affected by the regional area of not finished martensite transformation when the second inflection point appears. When the mean air temperature falls into the range of 10℃-20℃, the residual distortion is small; when it is lower than 10℃, positive distortion appears; when it is higher than 20℃, negative distortion appears. The distortion varies with seasonal temperature, which is directly responsible for the great machining allowance given in production.展开更多
文摘This paper summarizes the development of hydro-projects in China,blended with an international perspective.It expounds major technical progress toward ensuring the safe construction of high dams and river harnessing,and covers the theorization of uneven non-equilibrium sediment transport,inter-basin water diversion,giant hydro-generator units,pumped storage power stations,underground caverns,ecological protection,and so on.
基金Project(50465002) supported by the National Natural Science Foundation of China
文摘In order to investigate the feasibility of monitoring the fatigue cracks in turbine blades using acoustic emission (AE) technique, the AE characteristics of fatigue crack growth were studied in the laboratory. And the characteristics were compared with those of background noise received from a real hydraulic turbine unit. It is found that the AE parameters such as the energy and duration can qualitatively describe the fatigue state of the blades. The correlations of crack propagation rates and acoustic emission count rates vs stress intensity factor (SIF) range are also obtained. At the same time, for the specimens of 20SiMn under the given testing conditions, it is noted that the rise time and duration of events emitted from the fatigue process are lower than those from the background noise; amplitude range is 49-74 dB, which is lower than that of the noise (90-99 dB); frequency range of main energy of crack signals is higher than 60 kHz while that in the noise is lower than 55 kHz. Thus, it is possible to extract the useful crack signals from the noise through appropriate signal processing methods and to represent the crack status of blade materials by AE parameters. As a result, it is feasible to monitor the safety of runners using AE technique.
文摘Recently, small hydroelectric generators have gained attention as a further development in water turbine technology for ultra low head drops in open channels. The authors have evaluated the application of cross-flow water turbines in open channels as an undershot type after removing the casings and guide vanes to substantially simplify these water turbines. However, because undershot cross-flow water turbines are designed on the basis of cross-flow water turbine runners used in typical pipelines, it remains unclear whether the number of blades has an effect on the performance or flow fields. Thus, in this research, experiments and numerical analyses are employed to study the performance and flow fields of undershot cross-flow water turbines with varying number of blades. The findings show that the turbine output and torque are lower, the fluctuation is significantly higher, and the turbine efficiency is higher for runners with 8 blades as opposed to those with 24 blades.
基金supported by the National Eleventh Five-Year Science and Technology Support Program of China (Grant No.2007BAF02B02)the Major Projects of Ministry of Science of China (Grant No.2009ZX04014-082)
文摘Distortion often appears at the corners of heavy turbine blade castings during heat treatment processes, so a great machining allowance is generally set in production which directly results in cost increase. In this paper, a novel real-time measuring technology is developed for non-contact measuring the deformation behavior of heavy steel castings in heat treatment process. It was employed to measure the distortion and the temperature field of a batch of heavy turbine blade castings at cooling stage in normalizing process. Three inflection points appear in the distortion-time curves, and the residual distortion is affected by the regional area of not finished martensite transformation when the second inflection point appears. When the mean air temperature falls into the range of 10℃-20℃, the residual distortion is small; when it is lower than 10℃, positive distortion appears; when it is higher than 20℃, negative distortion appears. The distortion varies with seasonal temperature, which is directly responsible for the great machining allowance given in production.
