We report a simple preparation method of a renewable superhydrophobic surface by thermally induced phase separation （TIPS） and mechanical peeling. Porous polyvinylidene fluoride （PVDF） membranes with hierarchical ...We report a simple preparation method of a renewable superhydrophobic surface by thermally induced phase separation （TIPS） and mechanical peeling. Porous polyvinylidene fluoride （PVDF） membranes with hierarchical structures were prepared by a TIPS process under different cooling conditions, which were confirmed by scanning electron microscopy and mercury intrusion porosimetry. After peeling off the top layer, rough structures with hundreds of nanometers to several microns were obtained. A digital microscopy determines that the surface roughness of peeled PVDF membranes is much higher than that of the original PVDF membrane, which is important to obtain the superhydrophobicity. Water contact angle and sliding angle measurements demonstrate that the peeled membrane surfaces display super- hydrophobicity with a high contact angle （152°） and a low sliding angle （7.2°）. Moreover, the superhydrophobicity can be easily recovered for many times by a simple mechanical peeling, identical to the original superhydrophobicity. This simple preparation method is low cost, and suitable for large-scale industrialization, which may offer more opportunities for practical applications.展开更多
The study was designed to investigate the use of two sorbents namely(i) Fe3O4 nanoparticles immobilized in sodium alginate matrix(FNPSA) and(ii) Fe3O4 nanoparticles and saponified orange peel residue immobilized in so...The study was designed to investigate the use of two sorbents namely(i) Fe3O4 nanoparticles immobilized in sodium alginate matrix(FNPSA) and(ii) Fe3O4 nanoparticles and saponified orange peel residue immobilized in sodium alginate matrix(FNPSOPR) as sorbents for fluoride removal from contaminated water. The synthesized nanoparticles were analyzed and characterized by dynamic light scattering, X-ray diffraction, vibrating sample magnetometry, and scanning electron microscopy with energy dispersive X-ray spectroscopy and Fourier transform-infrared spectrometry. The sorbent matrices were prepared in the form of beads and surface functionalized to enable enhanced sorption of fluoride ions. Batch sorption studies were carried out and the sorption isotherm and reaction kinetics were analyzed. Both the sorbents followed Langmuir model of isotherm and fitted well with Pseudo first order reaction. The maximum sorption capacity exhibited by FNPSA and FNPSOPR was58.24 mg·g-1and 80.33 mg·g-1respectively. Five sorption–desorption cycles exhibited 100%, 97.56%, 94.53%,83.21%, and 76.53% of regeneration of FNPSOPR. Accordingly, it is demonstrated that FNSOPR could be used as a promising sorbent for easy and efficient removal of fluoride from contaminated water with good reusability.The current work suggests a simple and effective method to remove fluoride from contaminated water.展开更多
基金This work is supported by the National Natural Science Foundation of China （No.51403107）, the Natural Science Foundation of Ningbo （No.2015A610014）, the Key Laboratory of Marine Materials and Related Tech- nologies （No.2016K07）, and K. C. Wong Magna Fund in Ningbo University.
文摘We report a simple preparation method of a renewable superhydrophobic surface by thermally induced phase separation （TIPS） and mechanical peeling. Porous polyvinylidene fluoride （PVDF） membranes with hierarchical structures were prepared by a TIPS process under different cooling conditions, which were confirmed by scanning electron microscopy and mercury intrusion porosimetry. After peeling off the top layer, rough structures with hundreds of nanometers to several microns were obtained. A digital microscopy determines that the surface roughness of peeled PVDF membranes is much higher than that of the original PVDF membrane, which is important to obtain the superhydrophobicity. Water contact angle and sliding angle measurements demonstrate that the peeled membrane surfaces display super- hydrophobicity with a high contact angle （152°） and a low sliding angle （7.2°）. Moreover, the superhydrophobicity can be easily recovered for many times by a simple mechanical peeling, identical to the original superhydrophobicity. This simple preparation method is low cost, and suitable for large-scale industrialization, which may offer more opportunities for practical applications.
基金the management of VIT University for their support in research and Defence Metallurgical Research Laboratory, DRDO, Hyderabad for helping in VSM analysis
文摘The study was designed to investigate the use of two sorbents namely(i) Fe3O4 nanoparticles immobilized in sodium alginate matrix(FNPSA) and(ii) Fe3O4 nanoparticles and saponified orange peel residue immobilized in sodium alginate matrix(FNPSOPR) as sorbents for fluoride removal from contaminated water. The synthesized nanoparticles were analyzed and characterized by dynamic light scattering, X-ray diffraction, vibrating sample magnetometry, and scanning electron microscopy with energy dispersive X-ray spectroscopy and Fourier transform-infrared spectrometry. The sorbent matrices were prepared in the form of beads and surface functionalized to enable enhanced sorption of fluoride ions. Batch sorption studies were carried out and the sorption isotherm and reaction kinetics were analyzed. Both the sorbents followed Langmuir model of isotherm and fitted well with Pseudo first order reaction. The maximum sorption capacity exhibited by FNPSA and FNPSOPR was58.24 mg·g-1and 80.33 mg·g-1respectively. Five sorption–desorption cycles exhibited 100%, 97.56%, 94.53%,83.21%, and 76.53% of regeneration of FNPSOPR. Accordingly, it is demonstrated that FNSOPR could be used as a promising sorbent for easy and efficient removal of fluoride from contaminated water with good reusability.The current work suggests a simple and effective method to remove fluoride from contaminated water.
