To mitigate the damages produced by flood discharges of hydropower stations, a three-dimensional numerical model of the aerated water jet restricted by gravity, air resistance and air buoyancy is proposed. Based on th...To mitigate the damages produced by flood discharges of hydropower stations, a three-dimensional numerical model of the aerated water jet restricted by gravity, air resistance and air buoyancy is proposed. Based on theoretical analysis and prototype data, a three-dimensional stochastic model is constructed using Monte Carlo method to evaluate the range of atomization and intensity of rainfall in gorges, which are strongly affected by complex terrain and various wind conditions. The prototype data observed from two hydropower stations are selected in the feedback and verification analysis to verify the proposed model. The result shows that the computational solutions fit the prototype data well. This model can be used to forecast the atomization of a hydropower station that is being designed or constructed.展开更多
A SLon full-scale continuous centrifugal concentrator was used to reconcentrate hematite from a high gradient magnetic separation concentrate to study the effect of impact angle, concentrate mass and drum rotation spe...A SLon full-scale continuous centrifugal concentrator was used to reconcentrate hematite from a high gradient magnetic separation concentrate to study the effect of impact angle, concentrate mass and drum rotation speed on the impact energy of turbulent water sprays for continuous centrifugal concentration, under conditions of feed volume flow rate around 9 m3/h, feed solid concentration of 25%-35% and reciprocating velocity of water sprays at 0.05 m/s. The results indicate that a minimal critical impact energy is required in the water sprays for achieving continuous concentration of the concentrator; an unfitted impact angle reduces the impact efficiency, and the highest impact efficiency of 0.6416 is found at the mpact angle of 60°; the increase in concentrate mass leads to an increase in impact energy, and the highest impact efficiency is maintained when the concentrate mass varies in the range of 0.44-0.59 kg/s; when the concentrate mass and the pressure of water sprays are kept at around 0.45 kg/s and in the range of 0.4-0.6 MPa respectively, the impact energy increases proportionally with the increase of drum rotation speed.展开更多
基金Supported by Natural Science Foundation of China (No.50379033)Program for New Century Excellent Talents in University.
文摘To mitigate the damages produced by flood discharges of hydropower stations, a three-dimensional numerical model of the aerated water jet restricted by gravity, air resistance and air buoyancy is proposed. Based on theoretical analysis and prototype data, a three-dimensional stochastic model is constructed using Monte Carlo method to evaluate the range of atomization and intensity of rainfall in gorges, which are strongly affected by complex terrain and various wind conditions. The prototype data observed from two hydropower stations are selected in the feedback and verification analysis to verify the proposed model. The result shows that the computational solutions fit the prototype data well. This model can be used to forecast the atomization of a hydropower station that is being designed or constructed.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 50638020)
文摘A SLon full-scale continuous centrifugal concentrator was used to reconcentrate hematite from a high gradient magnetic separation concentrate to study the effect of impact angle, concentrate mass and drum rotation speed on the impact energy of turbulent water sprays for continuous centrifugal concentration, under conditions of feed volume flow rate around 9 m3/h, feed solid concentration of 25%-35% and reciprocating velocity of water sprays at 0.05 m/s. The results indicate that a minimal critical impact energy is required in the water sprays for achieving continuous concentration of the concentrator; an unfitted impact angle reduces the impact efficiency, and the highest impact efficiency of 0.6416 is found at the mpact angle of 60°; the increase in concentrate mass leads to an increase in impact energy, and the highest impact efficiency is maintained when the concentrate mass varies in the range of 0.44-0.59 kg/s; when the concentrate mass and the pressure of water sprays are kept at around 0.45 kg/s and in the range of 0.4-0.6 MPa respectively, the impact energy increases proportionally with the increase of drum rotation speed.