A steam power plant can work as a dual purpose plant for simultaneous production of steam and elec-trical power. In this paper we seek the optimum integration of a steam power plant as a source and a site utility sys-...A steam power plant can work as a dual purpose plant for simultaneous production of steam and elec-trical power. In this paper we seek the optimum integration of a steam power plant as a source and a site utility sys-tem as a sink of steam and power. Estimation for the cogeneration potential prior to the design of a central utility system for site utility systems is vital to the targets for site fuel demand as well as heat and power production. In this regard, a new cogeneration targeting procedure is proposed for integration of a steam power plant and a site utility consisting of a process plant. The new methodology seeks the optimal integration based on a new cogenera-tion targeting scheme. In addition, a modified site utility grand composite curve(SUGCC) diagram is proposed and compared to the original SUGCC. A gas fired steam power plant and a process site utility is considered in a case study. The applicability of the developed procedure is tested against other design methods(STAR? and Thermoflex software) through a case study. The proposed method gives comparable results, and the targeting method is used for optimal integration of steam levels. Identifying optimal conditions of steam levels for integration is important in the design of utility systems, as the selection of steam levels in a steam power plant and site utility for integration greatly influences the potential for cogeneration and energy recovery. The integration of steam levels of the steam power plant and the site utility system in the case study demonstrates the usefulness of the method for reducing the overall energy consumption for the site.展开更多
In this paper the effects of the condenser design parameters(such as turbine inlet condition.turbine power and condenser pressure) on heat transfer area,cooling water flow-rate.condenser cost and specific energy gener...In this paper the effects of the condenser design parameters(such as turbine inlet condition.turbine power and condenser pressure) on heat transfer area,cooling water flow-rate.condenser cost and specific energy generation cost are studied for surface type condenser.The results are given in the text and also shown as diagrams.展开更多
Experimental investigations of non-equilibrium spontaneous condensation in transonic steam flow were carded out in linear blade cascade. The linear cascade consists of the stator blades of the last stage of low pressu...Experimental investigations of non-equilibrium spontaneous condensation in transonic steam flow were carded out in linear blade cascade. The linear cascade consists of the stator blades of the last stage of low pressure steam turbine. The applied experimental test section is a part of a small scale steam power plant located at Silesian Uni- versity of Technology in Gliwice. The steam parameters at the test section inlet correspond to the real conditions in low pressure part of 200MWe steam turbine. The losses in the cascade were estimated using measured static pressure and temperature behind the cascade and the total parameters at inlet. The static pressure measurements on the blade surface as well as the Schlieren pictures were used to assess the flow field in linear cascade of steam turbine stator blades.展开更多
文摘A steam power plant can work as a dual purpose plant for simultaneous production of steam and elec-trical power. In this paper we seek the optimum integration of a steam power plant as a source and a site utility sys-tem as a sink of steam and power. Estimation for the cogeneration potential prior to the design of a central utility system for site utility systems is vital to the targets for site fuel demand as well as heat and power production. In this regard, a new cogeneration targeting procedure is proposed for integration of a steam power plant and a site utility consisting of a process plant. The new methodology seeks the optimal integration based on a new cogenera-tion targeting scheme. In addition, a modified site utility grand composite curve(SUGCC) diagram is proposed and compared to the original SUGCC. A gas fired steam power plant and a process site utility is considered in a case study. The applicability of the developed procedure is tested against other design methods(STAR? and Thermoflex software) through a case study. The proposed method gives comparable results, and the targeting method is used for optimal integration of steam levels. Identifying optimal conditions of steam levels for integration is important in the design of utility systems, as the selection of steam levels in a steam power plant and site utility for integration greatly influences the potential for cogeneration and energy recovery. The integration of steam levels of the steam power plant and the site utility system in the case study demonstrates the usefulness of the method for reducing the overall energy consumption for the site.
文摘In this paper the effects of the condenser design parameters(such as turbine inlet condition.turbine power and condenser pressure) on heat transfer area,cooling water flow-rate.condenser cost and specific energy generation cost are studied for surface type condenser.The results are given in the text and also shown as diagrams.
基金supported by the National Science Centre funds within the project with nr.2011/03/B/ST8/06425
文摘Experimental investigations of non-equilibrium spontaneous condensation in transonic steam flow were carded out in linear blade cascade. The linear cascade consists of the stator blades of the last stage of low pressure steam turbine. The applied experimental test section is a part of a small scale steam power plant located at Silesian Uni- versity of Technology in Gliwice. The steam parameters at the test section inlet correspond to the real conditions in low pressure part of 200MWe steam turbine. The losses in the cascade were estimated using measured static pressure and temperature behind the cascade and the total parameters at inlet. The static pressure measurements on the blade surface as well as the Schlieren pictures were used to assess the flow field in linear cascade of steam turbine stator blades.
