A nonlinear mathematical model of the injection molding process for electrohydraulic servo injection molding machine (IMM) is developed.It was found necessary to consider the characteristics of asymmetric cylinder for...A nonlinear mathematical model of the injection molding process for electrohydraulic servo injection molding machine (IMM) is developed.It was found necessary to consider the characteristics of asymmetric cylinder for electrohydraulic servo IMM.The model is based on the dynamics of the machine including servo valve,asymmetric cylinder and screw,and the non-Newtonian flow behavior of polymer melt in injection molding is also considered.The performance of the model was evaluated based on novel approach of molding - injection and compress molding,and the results of simulation and experimental data demonstrate the effectiveness of the model.展开更多
The corrosion resistances of widely used X33CrNiMnN23-8, X50CrMnNiNbN21-9, X53CrMnNiN20-8 and X55CrMnNiN20-8 high-alloyed austenite valves steels in combustion engines have been compared. The comparison was performed ...The corrosion resistances of widely used X33CrNiMnN23-8, X50CrMnNiNbN21-9, X53CrMnNiN20-8 and X55CrMnNiN20-8 high-alloyed austenite valves steels in combustion engines have been compared. The comparison was performed on the basis of results of kinetic corrosion of the test steels in combustion gases from gasoline with 5% ethanol additive （v/v） and the combustion gases from propane-butane. The corrosion test was performed gravimetrically under thermal shock conditions by heating samples of the test steels from room temperature up to 1,173 K in exhaust gases from a combustion engine, and holding them at this temperature for 2 h and then cooling at room temperature for about 25 min. Then the same thermal shock was repeated and after every 10 to 20 such cycles the mass of the specimens was measured. This experiment simulated the working conditions of a highly thermal loaded exhaust valve in a spark ignited engine. The analysis performed shows that the corrosion resistances of X33CrNiMnN23-8 and X50CrMnNiNbN21-9 valve steels in an environment of combustion gases from propane-butane and in gases from gasoline with 5% ethanol additive （v/v） are comparable, whereas the corrosion resistance of X53CrMnNiN20-8 and X55CrMnNiN20-8 valve steels in an environment of combustion gases from propane-butane is slightly worse than in gases from gasoline with 5% ethanol additive （v/v）.展开更多
基金Foundation item: The National Torch Program of China (No. 2001EB000991)
文摘A nonlinear mathematical model of the injection molding process for electrohydraulic servo injection molding machine (IMM) is developed.It was found necessary to consider the characteristics of asymmetric cylinder for electrohydraulic servo IMM.The model is based on the dynamics of the machine including servo valve,asymmetric cylinder and screw,and the non-Newtonian flow behavior of polymer melt in injection molding is also considered.The performance of the model was evaluated based on novel approach of molding - injection and compress molding,and the results of simulation and experimental data demonstrate the effectiveness of the model.
文摘The corrosion resistances of widely used X33CrNiMnN23-8, X50CrMnNiNbN21-9, X53CrMnNiN20-8 and X55CrMnNiN20-8 high-alloyed austenite valves steels in combustion engines have been compared. The comparison was performed on the basis of results of kinetic corrosion of the test steels in combustion gases from gasoline with 5% ethanol additive （v/v） and the combustion gases from propane-butane. The corrosion test was performed gravimetrically under thermal shock conditions by heating samples of the test steels from room temperature up to 1,173 K in exhaust gases from a combustion engine, and holding them at this temperature for 2 h and then cooling at room temperature for about 25 min. Then the same thermal shock was repeated and after every 10 to 20 such cycles the mass of the specimens was measured. This experiment simulated the working conditions of a highly thermal loaded exhaust valve in a spark ignited engine. The analysis performed shows that the corrosion resistances of X33CrNiMnN23-8 and X50CrMnNiNbN21-9 valve steels in an environment of combustion gases from propane-butane and in gases from gasoline with 5% ethanol additive （v/v） are comparable, whereas the corrosion resistance of X53CrMnNiN20-8 and X55CrMnNiN20-8 valve steels in an environment of combustion gases from propane-butane is slightly worse than in gases from gasoline with 5% ethanol additive （v/v）.
