期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
硅藻土化学成分对沥青高温性能的影响因素分析 被引量:16
1
作者 张兴友 谭忆秋 王哲人 《公路交通科技》 CAS CSCD 北大核心 2005年第6期18-20,共3页
硅藻精土作为一种新型沥青改性材料,掺配在沥青混凝土中,可以改善沥青混合料的物理力学性能,提高路面工程质量。本文通过4种不同的硅藻土,进行硅改沥青高温性能研究,并运用灰色系统关联度分析方法,找出硅藻土化学成分影响沥青高温性能... 硅藻精土作为一种新型沥青改性材料,掺配在沥青混凝土中,可以改善沥青混合料的物理力学性能,提高路面工程质量。本文通过4种不同的硅藻土,进行硅改沥青高温性能研究,并运用灰色系统关联度分析方法,找出硅藻土化学成分影响沥青高温性能的主要因素,从而确定硅藻土作为改性剂的基本化学成分。 展开更多
关键词 硅藻土 化学成分 沥青高温性能 灰色关联度
下载PDF
沥青高温性能指标和混合料贯入强度相关性分析 被引量:4
2
作者 刘黎萍 张晓英 《交通科学与工程》 2018年第3期1-6,共6页
为了对沥青高温性能指标进行优选,采用6种不同种类沥青,分别对软化点、动态剪切流变及多应力蠕变等高温性能进行了测试,并采用AC20级配的沥青混合料进行了高温单轴贯入试验,分析不同沥青高温性能指标与沥青混合料高温性能的相关性。研... 为了对沥青高温性能指标进行优选,采用6种不同种类沥青,分别对软化点、动态剪切流变及多应力蠕变等高温性能进行了测试,并采用AC20级配的沥青混合料进行了高温单轴贯入试验,分析不同沥青高温性能指标与沥青混合料高温性能的相关性。研究结果表明:不可恢复柔量与单轴贯入抗剪强度的相关性最好,零剪切粘度和车辙因子等与抗剪强度相关性较差;而改进车辙因子与抗剪强度的相关性比车辙因子与抗剪强度的相关性高。建议采用多应力蠕变试验的不可恢复柔量指标来评价沥青高温性能。 展开更多
关键词 沥青高温性能 多应力蠕变试验 单轴贯入强度
下载PDF
基于MSCR试验的沥青高温性能研究与花岗片麻岩沥青混合料高温性能预测 被引量:7
3
作者 刘钊 尹亚东 +1 位作者 代俊丰 罗蓉 《武汉理工大学学报(交通科学与工程版)》 2020年第6期1103-1107,共5页
传统车辙试验在评价沥青混合料高温性能时耗时较长,过程繁琐.文中通过MSCR试验对沥青进行检测,以不可恢复蠕变柔量J nr评价沥青的高温性能,然后通过车辙试验检测对应花岗片麻岩沥青混合料的高温性能,建立沥青高温性能与沥青混合料高温... 传统车辙试验在评价沥青混合料高温性能时耗时较长,过程繁琐.文中通过MSCR试验对沥青进行检测,以不可恢复蠕变柔量J nr评价沥青的高温性能,然后通过车辙试验检测对应花岗片麻岩沥青混合料的高温性能,建立沥青高温性能与沥青混合料高温性能的联系,从而达到利用沥青高温性能预测沥青混合料高温性能的目的.试验结果表明:沥青高温性能与对应沥青混合料高温性能具有良好的相关性,可以通过沥青的高温性能预测沥青混合料的高温性能,藉此优选沥青. 展开更多
关键词 MSCR 沥青高温性能 混合料高温性能 车辙试验 花岗片麻岩
下载PDF
MSCR试验用于评价沥青高温性能适用性研究 被引量:3
4
作者 李剑新 郝培文 +2 位作者 李奕佳 肖卓 李绍辉 《石油沥青》 2020年第3期1-5,共5页
通过对“同一油源不同标号沥青(克拉玛依沥青30号、50号、70号、90号、110号)、不同油源同一标号沥青(克拉玛依沥青、临河沥青、西太沥青90号)”进行原样、短期老化、长期老化后的软化点、布氏黏度及MSCR试验,评价沥青油源、标号及老化... 通过对“同一油源不同标号沥青(克拉玛依沥青30号、50号、70号、90号、110号)、不同油源同一标号沥青(克拉玛依沥青、临河沥青、西太沥青90号)”进行原样、短期老化、长期老化后的软化点、布氏黏度及MSCR试验,评价沥青油源、标号及老化程度对沥青高温性能评价指标的影响。结果表明:三种试验手段所得沥青高温性能一致;沥青油源及标号对其软化点影响显著;老化程度、标号及油源均对MSCR试验指标影响显著,但布氏黏度测试结果无显著差异。推荐采用MSCR试验评价沥青高温性能,从而有效区分和评价沥青油源、标号及老化程度对其高温性能的影响。 展开更多
关键词 沥青高温性能 油源 标号 老化程度 MSCR试验
下载PDF
沥青高温性能评价新指标 被引量:12
5
作者 吴慧彦 同鑫 《中外公路》 北大核心 2011年第3期263-266,共4页
针对中国目前评价沥青高温性能常规指标的不足,根据沥青材料流变学特性提出评价沥青高温性能的新指标,研究发现沥青零剪切粘度(ZSV)与沥青高温性能有较好的相关性,但其测试方法较复杂。文中采用沥青稠度仪测定沥青零剪切粘度,根据沥青... 针对中国目前评价沥青高温性能常规指标的不足,根据沥青材料流变学特性提出评价沥青高温性能的新指标,研究发现沥青零剪切粘度(ZSV)与沥青高温性能有较好的相关性,但其测试方法较复杂。文中采用沥青稠度仪测定沥青零剪切粘度,根据沥青稠度曲线分析得到无论是基质沥青或是改性沥青,沥青稠度与其高温性能有很好的相关性,尤其是针对改性沥青,改善了中国高温指标无法合理评价其高温性能的不足。 展开更多
关键词 沥青高温性能指标 材料流变学 零剪切粘度 稠度 稠度测试仪 可靠性
下载PDF
沥青材料实测粘弹特性参数分析 被引量:1
6
作者 代琦 任永刚 《交通科技与经济》 2007年第6期23-24,共2页
从沥青在动态荷载作用下的粘弹响应出发,分析美国战略性公路研究计划(SHRP)试验DSR实测的沥青粘弹参数—动粘度η′和滞后角δ。通过对2个参数物理意义的研究,探讨粘弹性Burgers模型元件在动态荷载作用下的粘弹性质。
关键词 动态荷载 粘弹特性 DSR 沥青高温性能 沥青低温性能
下载PDF
Study on High Temperature Behaviour of Gussasphalt 被引量:11
7
作者 杨军 Gharabaghy Cyrus Steinauer Bernhard 《Journal of Southeast University(English Edition)》 EI CAS 2002年第4期297-301,共5页
Rutting is one of the most damages in the asphalt surfaces for the orthotropic steel bridge decks. With Hamburg wheel tracking device, the suitable test conditions for Gussasphalt in Germany are pointed out, the high ... Rutting is one of the most damages in the asphalt surfaces for the orthotropic steel bridge decks. With Hamburg wheel tracking device, the suitable test conditions for Gussasphalt in Germany are pointed out, the high temperature behaviour of Gussasphalt with different binders are tested and compared. The polymer modified binder has higher resistance stability to rutting. The retained time and mixed frequency have obvious effects on Gussasphalt behaviour during Gussasphalt retained period. 展开更多
关键词 GUSSASPHALT high temperature behaviour Hamburg wheel tracking test polymer modified binder
下载PDF
Study on low temperature performance of Gussasphalt on steel decks with hard bitumen 被引量:6
8
作者 杨军 《Journal of Southeast University(English Edition)》 EI CAS 2003年第2期160-164,共5页
Using a Hamburg wheel-track test device, the resistance to rutting of Gussasphalt is tested and compared. Gussasphalt with hard bitumen has good resistance to rutting. The related resistance abilities to cracking at ... Using a Hamburg wheel-track test device, the resistance to rutting of Gussasphalt is tested and compared. Gussasphalt with hard bitumen has good resistance to rutting. The related resistance abilities to cracking at low temperature of Gussasphalt are tested and compared through flexural experiments and the composite structure fatigue test with temperature dropping. Gussasphalt with high performance polymer modified bitumen has a longer fatigue life and a lower breaking temperature; they can be used in the future surfaces for steel bridge decks in Germany. 展开更多
关键词 GUSSASPHALT surfaces for steel decks hard bitumen high performance polymer modified bitumen low temperature performance
下载PDF
Laboratory investigation on effects of organic montmorillonite on performance of crumb rubber modified asphalt 被引量:1
9
作者 TAN Zhi-hua WANG Ji-jing SHI Zhen-ning 《Journal of Central South University》 SCIE EI CAS CSCD 2020年第12期3888-3898,共11页
In this paper,organic montmorillonite(OMMT)was added into crumb rubber modified asphalt(CRMA)to improve its high temperature performance,anti-aging performance and storage stability.The effects of different OMMT conte... In this paper,organic montmorillonite(OMMT)was added into crumb rubber modified asphalt(CRMA)to improve its high temperature performance,anti-aging performance and storage stability.The effects of different OMMT content on properties of CRMA were studied.The rutting factor obtained by dynamic shear rheological(DSR)test was adopted to evaluate the high-temperature performance.The creep stiffness and m value determined by the bending beam rheometer(BBR)test were employed to evaluate the low-temperature performance.The softening point,ductility,rutting factor before and after rolling thin film ovens test(RTFOT)and pressure aging vessel test(PAV)were compared to characterize the aging properties.Moreover,the segregation test after being reserved for 48 h and 7 d was conducted,and the softening point and rutting factor of upper and lower layers of segregation pipe were adopted to evaluate the storage stability.The results indicated that the high-temperature performance and anti-aging performance were developed with the increasing content of OMMT,while the low-temperature performance deteriorated.The storage stability was improved with the increasing content of OMMT before the content exceeded 4%,after which the storage stability declined.Taking account of all factors,it is suggested that the optimum content of OMMT is 3%−4%. 展开更多
关键词 crumb rubber modified asphalt organic montmorillonite high-temperature performance low-temperature performance storage stability.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部