In this paper a hybrid process of modeling and optimization, which integrates a support vector machine （SVM） and genetic algorithm （GA）, was introduced to reduce the high time cost in structural optimization of sh...In this paper a hybrid process of modeling and optimization, which integrates a support vector machine （SVM） and genetic algorithm （GA）, was introduced to reduce the high time cost in structural optimization of ships. SVM, which is rooted in statistical learning theory and an approximate implementation of the method of structural risk minimization, can provide a good generalization performance in metamodeling the input-output relationship of real problems and consequently cuts down on high time cost in the analysis of real problems, such as FEM analysis. The GA, as a powerful optimization technique, possesses remarkable advantages for the problems that can hardly be optimized with common gradient-based optimization methods, which makes it suitable for optimizing models built by SVM. Based on the SVM-GA strategy, optimization of structural scantlings in the midship of a very large crude carrier （VLCC） ship was carried out according to the direct strength assessment method in common structural rules （CSR）, which eventually demonstrates the high efficiency of SVM-GA in optimizing the ship structural scantlings under heavy computational complexity. The time cost of this optimization with SVM-GA has been sharply reduced, many more loops have been processed within a small amount of time and the design has been improved remarkably.展开更多
The climate change and limitation of natural resources becomes main obstacle for the global economical development. So, the Vietnamese Government is very much concerned with reduction of harmful gas discharging from t...The climate change and limitation of natural resources becomes main obstacle for the global economical development. So, the Vietnamese Government is very much concerned with reduction of harmful gas discharging from the inland-water way ships. To overcome the problems, there are many counter-measures proposed such as： renovation of machinery and equipment, using re-creative energy and so on. The author＇s idea is to find a suitable method which can be applied on board of the inland-water ships to reduce discharging toxic gas by using blended palm oil as alternative fuel for marine diesel engines. Due to some disadvantages of the bended palm oil in comparison with traditional DO （diesel oil）, such as： low freezing point, high viscosity, low stability of blended fue, therefore somehow, the blended palm oil must be made a ship directly on board. With this idea, the author has designed and made agitate mixing equipment working on-line with fuel supply system of a diesel engine. The mixing equipment, then, has been tested at shore-side laboratory as well as on board ships. The research results showed that the fuel mixture （palm oil-DO） made by this mixing equipment is fully usable to replace traditional DO for marine diesel engines installed on board ships of inland water way in Vietnam. The Vietnamese Government accepted the research results as prerequisite to devise specific and practical action plans to reduce the pollution from the inland water way ships in coming years.展开更多
Fatigue cracks and fatigue damage have been important issues for ships and offshore structures for a long time.However,in the last decade,with the introduction of higher tensile steel in hull structures and increasing...Fatigue cracks and fatigue damage have been important issues for ships and offshore structures for a long time.However,in the last decade,with the introduction of higher tensile steel in hull structures and increasingly large ship dimensions,the greater attention should be paid to fatigue problems.Most research focuses on how to more easily access the fatigue strength of ships.Also,the major classification societies have already released their fatigue assessment notes.However,due to the complexity of factors influencing fatigue performances,such as wave load and pressure from cargo,the combination of different stress components,stress on concentration of local structure details,means stress,and the corrosive environments,there are different specifications with varying classification societies,leading to the different results from different fatigue assessment methods.This paper established the Det Norske Veritas（DNV） classification notes ＂fatigue assessment of ship structures＂ that explains the process of fatigue assessment and simplified methods.Finally,a fatigue analysis was performed by use data of a real ship and the reliability of the result was assessed.展开更多
A three-dimensional method of calculating wave loads of turret moored FPSO (Flo ating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring sys...A three-dimensional method of calculating wave loads of turret moored FPSO (Flo ating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring system are calculated according to the catenary theory, which are expressed as the function of linear stiffness coefficients and the displacements of the upper ends of mooring chains. The hydrodynamic coefficients of the ship are calculated by the three-dimensional potential flow theory of the linear hydrodynamic problem for ships with a low forward speed. The equations of ship motions are established with the effect of the restoring forces from the mooring system included as linear stiffness coefficients. The equations of motions are solved in frequency domain, and the responses of wave-induced motions and loads on the ship can be obtained. A computer pro gram based on this method has been developed,and some calculation examples are illustrated. Analysis results show that the method can give satisfying prediction of wave loads.展开更多
The ＂torque rich＂ is known as a phenomenon that makes reduction of ship speed, overload for main engine and higher fuel consumption of ship, even can cause some major problems for a ship propulsion system. In Vietna...The ＂torque rich＂ is known as a phenomenon that makes reduction of ship speed, overload for main engine and higher fuel consumption of ship, even can cause some major problems for a ship propulsion system. In Vietnam, according to investigated results, almost ships of country merchant fleet are facing with ship speed decrease, fuel consumption increase due to the torque rich, consequently the average ship operation cost is increasing from 15% to 25%, even higher in some cases and the environment is badly impacted. To comply with the international requirements and national legislation regarding to ＂using efficiently energy and environment protection＂, Vietnamese shipping companies must combat with the torque rich problem as crucial reason making downgrade in ship operation. The article shows a potential method to reduce the torque rich phenomena by modifying propeller which has been successfully applied for a real ship in Vietnam.展开更多
The consequences of ship collisions with an oil rig, offshore installation or platform can be far more expensive in relation to safety, environment and costs of damage. The damage due to a single incident of an Oil Ri...The consequences of ship collisions with an oil rig, offshore installation or platform can be far more expensive in relation to safety, environment and costs of damage. The damage due to a single incident of an Oil Rig Collision can be catastrophic due to the number of people on board and the added risk of explosion. However, the existing rules and regulations of collisions prevention are insufficient. The purpose of this article is to critically evaluate the risk of ships collisions with offshore platforms and installations and therefore propose an international regulation for the preventions of this type of collisions.展开更多
Transportation of tension leg platform （TLP） structures for a long distance has always been associated with the use of a heavy semi-transport vessel. The requirements of this type of vessel are always special, and t...Transportation of tension leg platform （TLP） structures for a long distance has always been associated with the use of a heavy semi-transport vessel. The requirements of this type of vessel are always special, and their availability is limited. To prepare for the future development of South China Sea deepwater projects, the China Offshore Oil Engineering Corporation has recently built a heavy lift transport vessel-Hai Yang Shi You 278. This semi-submersible vessel has a displacement capacity of 50k DWT, and a breath of 42 meters. Understanding the vessel＇s applicability and preparing it for use in future deepwater projects are becoming imminent needs. This paper reviews the current critical issues associated with TLP transportation and performs detailed analysis of the designed TLP during load-out and transportation. The newly built COOEC transportation vessel HYSY 278 was applied to dry transport of the TLP structure from the COOEC fabrication yard in Qingdao to an oil field in South China Sea. The entire process included the load-out of the TLP structure from the landsite of the fabrication yard, the offloading and float-on of the platform from the vessel, the dry transport of the TLP over a long distance, and the final offloading of the platform. Both hydrodynamic and structure analysis were performed to evaluate the behavior of the transport vessel and TLP structure. Special attention was paid to critical areas associated with the use of this new vessel, along with any potential limitations. The results demonstrate that HYSY 278 can effectively be used for transporting the structure with proper arrangement and well-prepared operation. The procedure and details were presented on the basis of the study results. Special attention was also given to discussion on future use based on the results from the analysis.展开更多
To use the renewable fuels for marine field is still very limited due to the need of newly developed technology, highly requested safety （for gas fuel） and high price of biodiesel. Therefore, with some advantages, s...To use the renewable fuels for marine field is still very limited due to the need of newly developed technology, highly requested safety （for gas fuel） and high price of biodiesel. Therefore, with some advantages, such as： simple producing process, reasonable price and simple modification technology needed, the blended SVO （straight vegetable oil） is recommended as suitable fuel for the marine application. Even though, there are some disadvantages of the blended SVO, such as a weak stability, layer separation in low temperature and some others. In order to apply the blended SVO as alternative fuel for marine diesel engines without the mentioned disadvantages, the paper will introduce a method to design and produce a fuel continuous mixer to make a blended SVO （palm oil）.展开更多
A field work has been carried out to identify the occurrence of oil and oil products pollution in mangrove sediment from Red Sea of Yemen. The concentration of total petroleum hydrocarbons is from 700ng/g at Kamaran I...A field work has been carried out to identify the occurrence of oil and oil products pollution in mangrove sediment from Red Sea of Yemen. The concentration of total petroleum hydrocarbons is from 700ng/g at Kamaran Island station to 400 ng/g at Al-Hodiedah station, and the total organic carbon (TOC) in samples ranges from 0.07% at Dhubab station to 0.03% at Kamaran Island station. This pollution is as a result of localized oil pollution and/or heavy ship traffic in the Red Sea and Gulf of Aden.展开更多
This paper proposes a rail pressure tracking controller based on a novel common rail system. A mathematical model, based on physical equations, is developed and used for feed forward control design. Rail pressure peak...This paper proposes a rail pressure tracking controller based on a novel common rail system. A mathematical model, based on physical equations, is developed and used for feed forward control design. Rail pressure peak sampling mechanism is designed to remove the disturbance of rail pressure due to fuel injection. All enhanced tracking differentiator is designed to get smooth tracking signal and exact differential signal from signal with noise. Double loop control strategy is designed to decouple the system and to improve dynamic performance of the system. Experimental results indicate that fluctuation of rail pressure is within il MPa in steady condition, while within ±3 MPa in transient condition, which verifies the effectiveness of the proposed rail pressure control strategy.展开更多
基金Supported by the Project of Ministry of Education and Finance (No.200512)the Project of the State Key Laboratory of Ocean Engineering (GKZD010053-10)
文摘In this paper a hybrid process of modeling and optimization, which integrates a support vector machine （SVM） and genetic algorithm （GA）, was introduced to reduce the high time cost in structural optimization of ships. SVM, which is rooted in statistical learning theory and an approximate implementation of the method of structural risk minimization, can provide a good generalization performance in metamodeling the input-output relationship of real problems and consequently cuts down on high time cost in the analysis of real problems, such as FEM analysis. The GA, as a powerful optimization technique, possesses remarkable advantages for the problems that can hardly be optimized with common gradient-based optimization methods, which makes it suitable for optimizing models built by SVM. Based on the SVM-GA strategy, optimization of structural scantlings in the midship of a very large crude carrier （VLCC） ship was carried out according to the direct strength assessment method in common structural rules （CSR）, which eventually demonstrates the high efficiency of SVM-GA in optimizing the ship structural scantlings under heavy computational complexity. The time cost of this optimization with SVM-GA has been sharply reduced, many more loops have been processed within a small amount of time and the design has been improved remarkably.
文摘The climate change and limitation of natural resources becomes main obstacle for the global economical development. So, the Vietnamese Government is very much concerned with reduction of harmful gas discharging from the inland-water way ships. To overcome the problems, there are many counter-measures proposed such as： renovation of machinery and equipment, using re-creative energy and so on. The author＇s idea is to find a suitable method which can be applied on board of the inland-water ships to reduce discharging toxic gas by using blended palm oil as alternative fuel for marine diesel engines. Due to some disadvantages of the bended palm oil in comparison with traditional DO （diesel oil）, such as： low freezing point, high viscosity, low stability of blended fue, therefore somehow, the blended palm oil must be made a ship directly on board. With this idea, the author has designed and made agitate mixing equipment working on-line with fuel supply system of a diesel engine. The mixing equipment, then, has been tested at shore-side laboratory as well as on board ships. The research results showed that the fuel mixture （palm oil-DO） made by this mixing equipment is fully usable to replace traditional DO for marine diesel engines installed on board ships of inland water way in Vietnam. The Vietnamese Government accepted the research results as prerequisite to devise specific and practical action plans to reduce the pollution from the inland water way ships in coming years.
文摘Fatigue cracks and fatigue damage have been important issues for ships and offshore structures for a long time.However,in the last decade,with the introduction of higher tensile steel in hull structures and increasingly large ship dimensions,the greater attention should be paid to fatigue problems.Most research focuses on how to more easily access the fatigue strength of ships.Also,the major classification societies have already released their fatigue assessment notes.However,due to the complexity of factors influencing fatigue performances,such as wave load and pressure from cargo,the combination of different stress components,stress on concentration of local structure details,means stress,and the corrosive environments,there are different specifications with varying classification societies,leading to the different results from different fatigue assessment methods.This paper established the Det Norske Veritas（DNV） classification notes ＂fatigue assessment of ship structures＂ that explains the process of fatigue assessment and simplified methods.Finally,a fatigue analysis was performed by use data of a real ship and the reliability of the result was assessed.
文摘A three-dimensional method of calculating wave loads of turret moored FPSO (Flo ating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring system are calculated according to the catenary theory, which are expressed as the function of linear stiffness coefficients and the displacements of the upper ends of mooring chains. The hydrodynamic coefficients of the ship are calculated by the three-dimensional potential flow theory of the linear hydrodynamic problem for ships with a low forward speed. The equations of ship motions are established with the effect of the restoring forces from the mooring system included as linear stiffness coefficients. The equations of motions are solved in frequency domain, and the responses of wave-induced motions and loads on the ship can be obtained. A computer pro gram based on this method has been developed,and some calculation examples are illustrated. Analysis results show that the method can give satisfying prediction of wave loads.
文摘The ＂torque rich＂ is known as a phenomenon that makes reduction of ship speed, overload for main engine and higher fuel consumption of ship, even can cause some major problems for a ship propulsion system. In Vietnam, according to investigated results, almost ships of country merchant fleet are facing with ship speed decrease, fuel consumption increase due to the torque rich, consequently the average ship operation cost is increasing from 15% to 25%, even higher in some cases and the environment is badly impacted. To comply with the international requirements and national legislation regarding to ＂using efficiently energy and environment protection＂, Vietnamese shipping companies must combat with the torque rich problem as crucial reason making downgrade in ship operation. The article shows a potential method to reduce the torque rich phenomena by modifying propeller which has been successfully applied for a real ship in Vietnam.
文摘The consequences of ship collisions with an oil rig, offshore installation or platform can be far more expensive in relation to safety, environment and costs of damage. The damage due to a single incident of an Oil Rig Collision can be catastrophic due to the number of people on board and the added risk of explosion. However, the existing rules and regulations of collisions prevention are insufficient. The purpose of this article is to critically evaluate the risk of ships collisions with offshore platforms and installations and therefore propose an international regulation for the preventions of this type of collisions.
基金Supported by the State Key Project "Installation Technical Study for Deepwater Floating Structures" under Grant No.2008ZX05026
文摘Transportation of tension leg platform （TLP） structures for a long distance has always been associated with the use of a heavy semi-transport vessel. The requirements of this type of vessel are always special, and their availability is limited. To prepare for the future development of South China Sea deepwater projects, the China Offshore Oil Engineering Corporation has recently built a heavy lift transport vessel-Hai Yang Shi You 278. This semi-submersible vessel has a displacement capacity of 50k DWT, and a breath of 42 meters. Understanding the vessel＇s applicability and preparing it for use in future deepwater projects are becoming imminent needs. This paper reviews the current critical issues associated with TLP transportation and performs detailed analysis of the designed TLP during load-out and transportation. The newly built COOEC transportation vessel HYSY 278 was applied to dry transport of the TLP structure from the COOEC fabrication yard in Qingdao to an oil field in South China Sea. The entire process included the load-out of the TLP structure from the landsite of the fabrication yard, the offloading and float-on of the platform from the vessel, the dry transport of the TLP over a long distance, and the final offloading of the platform. Both hydrodynamic and structure analysis were performed to evaluate the behavior of the transport vessel and TLP structure. Special attention was paid to critical areas associated with the use of this new vessel, along with any potential limitations. The results demonstrate that HYSY 278 can effectively be used for transporting the structure with proper arrangement and well-prepared operation. The procedure and details were presented on the basis of the study results. Special attention was also given to discussion on future use based on the results from the analysis.
文摘To use the renewable fuels for marine field is still very limited due to the need of newly developed technology, highly requested safety （for gas fuel） and high price of biodiesel. Therefore, with some advantages, such as： simple producing process, reasonable price and simple modification technology needed, the blended SVO （straight vegetable oil） is recommended as suitable fuel for the marine application. Even though, there are some disadvantages of the blended SVO, such as a weak stability, layer separation in low temperature and some others. In order to apply the blended SVO as alternative fuel for marine diesel engines without the mentioned disadvantages, the paper will introduce a method to design and produce a fuel continuous mixer to make a blended SVO （palm oil）.
文摘A field work has been carried out to identify the occurrence of oil and oil products pollution in mangrove sediment from Red Sea of Yemen. The concentration of total petroleum hydrocarbons is from 700ng/g at Kamaran Island station to 400 ng/g at Al-Hodiedah station, and the total organic carbon (TOC) in samples ranges from 0.07% at Dhubab station to 0.03% at Kamaran Island station. This pollution is as a result of localized oil pollution and/or heavy ship traffic in the Red Sea and Gulf of Aden.
基金the National Natural Science Foundation of China (No. 51179102)
文摘This paper proposes a rail pressure tracking controller based on a novel common rail system. A mathematical model, based on physical equations, is developed and used for feed forward control design. Rail pressure peak sampling mechanism is designed to remove the disturbance of rail pressure due to fuel injection. All enhanced tracking differentiator is designed to get smooth tracking signal and exact differential signal from signal with noise. Double loop control strategy is designed to decouple the system and to improve dynamic performance of the system. Experimental results indicate that fluctuation of rail pressure is within il MPa in steady condition, while within ±3 MPa in transient condition, which verifies the effectiveness of the proposed rail pressure control strategy.
